- Plant or maintain vegetation through activities such as mulching, fertilizing, watering, mowing, or pruning.
Occupations with related tasks Save Table: XLSX CSV
- Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Trim or pick flowers and clean flower beds.
- Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs, and apply mulch for protection, using gardening tools.
- Mow or edge lawns, using power mowers or edgers.
- Use irrigation methods to adjust the amount of water consumption and to prevent waste.
- Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls.
- Plan or cultivate lawns or gardens.
- Care for artificial turf fields, periodically removing the turf and replacing cushioning pads or vacuuming and disinfecting the turf after use to prevent the growth of harmful bacteria.
- Care for natural turf fields, making sure the underlying soil has the required composition to allow proper drainage and to support the grasses.
- Haul or spread topsoil, or spread straw over seeded soil to hold soil in place.
- Gather and remove litter.
- Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.
- Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chainsaws, electric clippers, sod cutters, or pruning saws.
- Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.
- Follow planned landscaping designs to determine where to lay sod, sow grass, or plant flowers or foliage.
- Attach wires from planted trees to support stakes.
- Rake, mulch, and compost leaves.
- Decorate gardens with stones or plants.
- Provide proper upkeep of sidewalks, driveways, parking lots, fountains, planters, burial sites, or other grounds features.
- Shovel snow from walks, driveways, or parking lots, and spread salt in those areas.
- Maintain irrigation systems, including winterizing the systems and starting them up in spring.
- Maintain or repair tools, equipment, or structures, such as buildings, greenhouses, fences, or benches, using hand or power tools.
- Install rock gardens, ponds, decks, drainage systems, irrigation systems, retaining walls, fences, planters, or playground equipment.
- Advise customers on plant selection or care.
- Build forms and mix and pour cement to form garden borders.
- Move furniture.
- Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans.
- Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
- Trim or pick flowers and clean flower beds.
- Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs, and apply mulch for protection, using gardening tools.
- Mow or edge lawns, using power mowers or edgers.
- Use irrigation methods to adjust the amount of water consumption and to prevent waste.
- Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls.
- Plan or cultivate lawns or gardens.
- Care for artificial turf fields, periodically removing the turf and replacing cushioning pads or vacuuming and disinfecting the turf after use to prevent the growth of harmful bacteria.
- Care for natural turf fields, making sure the underlying soil has the required composition to allow proper drainage and to support the grasses.
- Haul or spread topsoil, or spread straw over seeded soil to hold soil in place.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Trim, top, and reshape trees to achieve attractive shapes or to remove low-hanging branches.
- Trim jagged stumps, using saws or pruning shears.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Water, root-feed, and fertilize trees.
- Transplant and remove trees and shrubs, and prepare trees for moving.
- Operate shredding and chipping equipment, and feed limbs and brush into the machines.
- Operate boom trucks, loaders, stump chippers, brush chippers, tractors, power saws, trucks, sprayers, and other equipment and tools.
- Clean, sharpen, and lubricate tools and equipment.
- Hoist tools and equipment to tree trimmers, and lower branches with ropes or block and tackle.
- Climb trees, using climbing hooks and belts, or climb ladders to gain access to work areas.
- Supervise others engaged in tree trimming work and train lower-level employees.
- Load debris and refuse onto trucks and haul it away for disposal.
- Inspect trees to determine if they have diseases or pest problems.
- Provide information to the public regarding trees, such as advice on tree care.
- Clear sites, streets, and grounds of woody and herbaceous materials, such as tree stumps and fallen trees and limbs.
- Collect debris and refuse from tree trimming and removal operations into piles, using shovels, rakes, or other tools.
- Cable, brace, tie, bolt, stake, and guy trees and branches to provide support.
- Plan and develop budgets for tree work, and estimate the monetary value of trees.
- Remove broken limbs from wires, using hooked extension poles.
- Scrape decayed matter from cavities in trees and fill holes with cement to promote healing and to prevent further deterioration.
- Spray trees to treat diseased or unhealthy trees, including mixing chemicals and calibrating spray equipment.
- Apply tar or other protective substances to cut surfaces or seal surfaces and to protect them from fungi and insects.
- Split logs or wooden blocks into bolts, pickets, posts, or stakes, using hand tools such as ax wedges, sledgehammers, and mallets.
- Cut away dead and excess branches from trees, or clear branches around power lines, using climbing equipment or buckets of extended truck booms, or chainsaws, hooks, handsaws, shears, and clippers.
- Trim, top, and reshape trees to achieve attractive shapes or to remove low-hanging branches.
- Trim jagged stumps, using saws or pruning shears.
- Prune, cut down, fertilize, and spray trees as directed by tree surgeons.
- Water, root-feed, and fertilize trees.
- Transplant and remove trees and shrubs, and prepare trees for moving.
- Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers.
- Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes.
- Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls.
- Saw back-cuts, leaving sufficient sound wood to control direction of fall.
- Measure felled trees and cut them into specified log lengths, using chain saws and axes.
- Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges.
- Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling.
- Place supporting limbs or poles under felled trees to avoid splitting undersides, and to prevent logs from rolling.
- Appraise trees for certain characteristics, such as twist, rot, and heavy limb growth, and gauge amount and direction of lean, to determine how to control the direction of a tree's fall with the least damage.
- Assess logs after cutting to ensure that the quality and length are correct.
- Determine position, direction, and depth of cuts to be made, and placement of wedges or jacks.
- Select trees to be cut down, assessing factors such as site, terrain, and weather conditions before beginning work.
- Maintain and repair chainsaws and other equipment, cleaning, oiling, and greasing equipment, and sharpening equipment properly.
- Tag unsafe trees with high-visibility ribbons.
- Secure steel cables or chains to logs for dragging by tractors or for pulling by cable yarding systems.
- Load logs or wood onto trucks, trailers, or railroad cars, by hand or using loaders or winches.
- Mark logs for identification.
- Work as a member of a team, rotating between chain saw operation and skidder operation.
- Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers.
- Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes.
- Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls.
- Saw back-cuts, leaving sufficient sound wood to control direction of fall.
- Measure felled trees and cut them into specified log lengths, using chain saws and axes.
- Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges.
- Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling.
- Place supporting limbs or poles under felled trees to avoid splitting undersides, and to prevent logs from rolling.
- Thin or space trees, using power thinning saws.
- Prune or shear tree tops or limbs to control growth, increase density, or improve shape.
- Identify diseased or undesirable trees and remove them, using power saws or hand saws.
- Select or cut trees according to markings or sizes, types, or grades.
- Select tree seedlings, prepare the ground, or plant the trees in reforestation areas, using manual planting tools.
- Provide assistance to forest survey crews by clearing site-lines, holding measuring tools, or setting stakes.
- Check equipment to ensure that it is operating properly.
- Fight forest fires or perform prescribed burning tasks under the direction of fire suppression officers or forestry technicians.
- Perform fire protection or suppression duties, such as constructing fire breaks or disposing of brush.
- Confer with other workers to discuss issues, such as safety, cutting heights, or work needs.
- Maintain tallies of trees examined and counted during tree marking or measuring efforts.
- Explain or enforce regulations regarding camping, vehicle use, fires, use of buildings, or sanitation.
- Operate skidders, bulldozers, or other prime movers to pull a variety of scarification or site preparation equipment over areas to be regenerated.
- Spray or inject vegetation with insecticides to kill insects or to protect against disease or with herbicides to reduce competing vegetation.
- Maintain campsites or recreational areas, replenishing firewood or other supplies and cleaning kitchens or restrooms.
- Erect signs or fences, using posthole diggers, shovels, or other hand tools.
- Sort tree seedlings, discarding substandard seedlings, according to standard charts or verbal instructions.
- Create field maps using geographic information systems technology.
- Thin or space trees, using power thinning saws.
- Prune or shear tree tops or limbs to control growth, increase density, or improve shape.
- Identify diseased or undesirable trees and remove them, using power saws or hand saws.
- Select or cut trees according to markings or sizes, types, or grades.
- Select tree seedlings, prepare the ground, or plant the trees in reforestation areas, using manual planting tools.
- Provide assistance to forest survey crews by clearing site-lines, holding measuring tools, or setting stakes.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Mix pesticides, herbicides, or fungicides for application to trees, shrubs, lawns, or botanical crops.
- Fill sprayer tanks with water and chemicals, according to formulas.
- Lift, push, and swing nozzles, hoses, and tubes to direct spray over designated areas.
- Identify lawn or plant diseases to determine the appropriate course of treatment.
- Cover areas to specified depths with pesticides, applying knowledge of weather conditions, droplet sizes, elevation-to-distance ratios, and obstructions.
- Start motors and engage machinery, such as sprayer agitators or pumps or portable spray equipment.
- Connect hoses and nozzles selected according to terrain, distribution pattern requirements, types of infestations, and velocities.
- Clean or service machinery to ensure operating efficiency, using water, gasoline, lubricants, or hand tools.
- Provide driving instructions to truck drivers to ensure complete coverage of designated areas, using hand and horn signals.
- Establish driving routes for pesticide applications.
- Record information about pesticide applications, such as the type used and amount applied.
- Use new technology and equipment, such as drones or GPS systems, to apply pesticides more accurately and efficiently.
- Plant grass with seed spreaders, and operate straw blowers to cover seeded areas with mixtures of asphalt and straw.
- Water plants, and cut, condition, and clean flowers and foliage for storage.
- Confer with clients regarding price and type of arrangement desired and the date, time, and place of delivery.
- Select flora and foliage for arrangements, working with numerous combinations to synthesize and develop new creations.
- Order and purchase flowers and supplies from wholesalers and growers.
- Deliver arrangements to customers, or oversee employees responsible for deliveries.
- Plan arrangement according to client's requirements, using knowledge of design and properties of materials, or select appropriate standard design pattern.
- Trim material and arrange bouquets, wreaths, terrariums, and other items, using trimmers, shapers, wire, pins, floral tape, foam, and other materials.
- Wrap and price completed arrangements.
- Perform office and retail service duties, such as keeping financial records, serving customers, answering telephones, selling giftware items, and receiving payment.
- Unpack stock as it comes into the shop.
- Create and change in-store and window displays, designs, and looks to enhance a shop's image.
- Inform customers about the care, maintenance, and handling of various flowers and foliage, indoor plants, and other items.
- Perform general cleaning duties in the store to ensure the shop is clean and tidy.
- Decorate, or supervise the decoration of, buildings, halls, churches, or other facilities for parties, weddings and other occasions.
- Conduct classes or demonstrations, or train other workers.
- Water plants, and cut, condition, and clean flowers and foliage for storage.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Service, clean, or supply restrooms.
- Gather and empty trash.
- Clean building floors by sweeping, mopping, scrubbing, or vacuuming.
- Monitor building security and safety by performing tasks such as locking doors after operating hours or checking electrical appliance use to ensure that hazards are not created.
- Notify managers concerning the need for major repairs or additions to building operating systems.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees.
- Requisition supplies or equipment needed for cleaning and maintenance duties.
- Dust furniture, walls, machines, or equipment.
- Clean and polish furniture and fixtures.
- Move heavy furniture, equipment, or supplies, either manually or with hand trucks.
- Strip, seal, finish, and polish floors.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Make adjustments or minor repairs to heating, cooling, ventilating, plumbing, or electrical systems.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Set up, arrange, or remove decorations, tables, chairs, ladders, or scaffolding to prepare facilities for events, such as banquets or meetings.
- Clean chimneys, flues, and connecting pipes, using power or hand tools.
- Steam-clean or shampoo carpets.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
