- Gather and remove litter.
Occupations with related tasks Save Table: XLSX CSV
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Service, clean, or supply restrooms.
- Clean building floors by sweeping, mopping, scrubbing, or vacuuming.
- Monitor building security and safety by performing tasks such as locking doors after operating hours or checking electrical appliance use to ensure that hazards are not created.
- Notify managers concerning the need for major repairs or additions to building operating systems.
- Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
- Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.
- Clean windows, glass partitions, or mirrors, using soapy water or other cleaners, sponges, or squeegees.
- Requisition supplies or equipment needed for cleaning and maintenance duties.
- Dust furniture, walls, machines, or equipment.
- Clean and polish furniture and fixtures.
- Move heavy furniture, equipment, or supplies, either manually or with hand trucks.
- Strip, seal, finish, and polish floors.
- Remove snow from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow-melting chemicals.
- Make adjustments or minor repairs to heating, cooling, ventilating, plumbing, or electrical systems.
- Drive vans, industrial trucks, or other vehicles required to travel to, or to perform, cleaning work.
- Spray insecticides or fumigants to prevent insect or rodent infestation.
- Set up, arrange, or remove decorations, tables, chairs, ladders, or scaffolding to prepare facilities for events, such as banquets or meetings.
- Clean chimneys, flues, and connecting pipes, using power or hand tools.
- Steam-clean or shampoo carpets.
- Gather and empty trash.
- Mow or trim lawns or shrubbery, using mowers or hand or power trimmers, and clear debris from grounds.
- Dump refuse or recyclable materials at disposal sites.
- Inspect trucks prior to beginning routes to ensure safe operating condition.
- Drive trucks, following established routes, through residential streets or alleys or through business or industrial areas.
- Refuel trucks or add other fluids, such as oil or brake fluid.
- Fill out defective equipment reports.
- Operate automated or semi-automated hoisting devices that raise refuse bins and dump contents into openings in truck bodies.
- Dismount garbage trucks to collect garbage and remount trucks to ride to the next collection point.
- Operate equipment that compresses collected refuse.
- Communicate with dispatchers concerning delays, unsafe sites, accidents, equipment breakdowns, or other maintenance problems.
- Check road or weather conditions to determine how routes will be affected.
- Clean trucks or compactor bodies after routes have been completed.
- Tag garbage or recycling containers to inform customers of problems, such as excess garbage or inclusion of items that are not permitted.
- Make special pickups of recyclable materials, such as food scraps, used oil, discarded computers, or other electronic items.
- Organize schedules for refuse collection.
- Dump refuse or recyclable materials at disposal sites.
- Place radioactive waste, such as sweepings or broken sample bottles, into containers for shipping or disposal.
- Brief workers on radiation levels in work areas.
- Calculate safe radiation exposure times for personnel using plant contamination readings and prescribed safe levels of radiation.
- Monitor personnel to determine the amounts and intensities of radiation exposure.
- Inform supervisors when individual exposures or area radiation levels approach maximum permissible limits.
- Provide initial response to abnormal events or to alarms from radiation monitoring equipment.
- Determine intensities and types of radiation in work areas, equipment, or materials, using radiation detectors or other instruments.
- Instruct personnel in radiation safety procedures and demonstrate use of protective clothing and equipment.
- Collect samples of air, water, gases, or solids to determine radioactivity levels of contamination.
- Analyze samples, such as air or water samples, for contaminants or other elements.
- Determine or recommend radioactive decontamination procedures, according to the size and nature of equipment and the degree of contamination.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Prepare reports describing contamination tests, material or equipment decontaminated, or methods used in decontamination processes.
- Decontaminate objects by cleaning with soap or solvents or by abrading with wire brushes, buffing wheels, or sandblasting machines.
- Enter data into computers to record characteristics of nuclear events or to locate coordinates of particles.
- Calibrate and maintain chemical instrumentation sensing elements and sampling system equipment, using calibration instruments and hand tools.
- Document results from radiation and contamination surveys.
- Inspect, test, and maintain respiratory protection equipment.
- Write radiological work permits.
- Place radioactive waste, such as sweepings or broken sample bottles, into containers for shipping or disposal.
- Empty wastebaskets, empty and clean ashtrays, and transport other trash and waste to disposal areas.
- Keep storage areas and carts well-stocked, clean, and tidy.
- Carry linens, towels, toilet items, and cleaning supplies, using wheeled carts.
- Clean rooms, hallways, lobbies, lounges, restrooms, corridors, elevators, stairways, locker rooms, and other work areas so that health standards are met.
- Sweep, scrub, wax, or polish floors, using brooms, mops, or powered scrubbing and waxing machines.
- Replenish supplies, such as drinking glasses, linens, writing supplies, and bathroom items.
- Clean rugs, carpets, upholstered furniture, and draperies, using vacuum cleaners and shampooers.
- Wash windows, walls, ceilings, and woodwork, waxing and polishing as necessary.
- Dust and polish furniture and equipment.
- Disinfect equipment and supplies, using germicides or steam-operated sterilizers.
- Observe precautions required to protect hotel and guest property and report damage, theft, and found articles to supervisors.
- Sort, count, and mark clean linens and store them in linen closets.
- Sort clothing and other articles, load washing machines, and iron and fold dried items.
- Move and arrange furniture and turn mattresses.
- Replace light bulbs.
- Deliver television sets, ironing boards, baby cribs, and rollaway beds to guests' rooms.
- Hang draperies and dust window blinds.
- Request repair services and wait for repair workers to arrive.
- Prepare rooms for meetings and arrange decorations, media equipment, and furniture for social or business functions.
- Polish silver accessories and metalwork, such as fixtures and fittings.
- Empty wastebaskets, empty and clean ashtrays, and transport other trash and waste to disposal areas.
- Dispose of waste material after completing work assignments.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Dispose of hazardous waste in an appropriate manner.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Monitor the feed and speed of machines during the machining process.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Operate equipment to verify operational efficiency.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Prepare working sketches for the illustration of product appearance.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Advise clients about the materials being used for finished products.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
