- Test or calibrate components or equipment, following manufacturers' manuals and troubleshooting techniques, using hand tools, power tools, or measuring devices.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
3 | 7 | 3 | 49-2011.00 | Computer, Automated Teller, and Office Machine Repairers |
2 | 10 | 3 | 49-9012.00 | Control and Valve Installers and Repairers, Except Mechanical Door |
1 | 10 | 3 | 49-2021.00 | Radio, Cellular, and Tower Equipment Installers and Repairers |
1 | 6 | 3 | 49-3023.00 | Automotive Service Technicians and Mechanics |
1 | 4 | 3 | 49-9081.00 | Wind Turbine Service Technicians
|
1 | 4 | 3 | 49-2094.00 | Electrical and Electronics Repairers, Commercial and Industrial Equipment |
1 | 4 | 2 | 49-9099.01 | Geothermal Technicians |
1 | 4 | 3 | 49-9021.00 | Heating, Air Conditioning, and Refrigeration Mechanics and Installers
|
1 | 3 | 3 | 49-9061.00 | Camera and Photographic Equipment Repairers |
1 | 3 | 3 | 19-4051.00 | Nuclear Technicians |
1 | 2 | 3 | 49-2097.00 | Audiovisual Equipment Installers and Repairers |
1 | 2 | 3 | 27-4015.00 | Lighting Technicians |
1 | 2 | 3 | 29-2036.00 | Medical Dosimetrists |
1 | 1 | 2 | 49-9096.00 | Riggers |
1 | 1 | 2 | 53-4022.00 | Railroad Brake, Signal, and Switch Operators and Locomotive Firers |
1 | 1 | 2 | 51-9061.00 | Inspectors, Testers, Sorters, Samplers, and Weighers |
- Align, adjust, or calibrate equipment according to specifications.
- Test new systems to ensure that they are in working order.
- Calibrate testing instruments.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Operate machines to test functioning of parts or mechanisms.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Test components or circuits of faulty equipment to locate defects, using oscilloscopes, signal generators, ammeters, voltmeters, or special diagnostic software programs.
- Reassemble machines after making repairs or replacing parts.
- Converse with customers to determine details of equipment problems.
- Disassemble machines to examine parts, such as wires, gears, or bearings for wear or defects, using hand or power tools and measuring devices.
- Advise customers concerning equipment operation, maintenance, or programming.
- Travel to customers' stores or offices to service machines or to provide emergency repair service.
- Maintain parts inventories and order any additional parts needed for repairs.
- Reinstall software programs or adjust settings on existing software to fix machine malfunctions.
- Maintain records of equipment maintenance work or repairs.
- Complete repair bills, shop records, time cards, or expense reports.
- Install and configure new equipment, including operating software or peripheral equipment.
- Analyze equipment performance records to assess equipment functioning.
- Read specifications, such as blueprints, charts, or schematics, to determine machine settings or adjustments.
- Update existing equipment, performing tasks such as installing updated circuit boards or additional memory.
- Assemble machines according to specifications, using hand or power tools and measuring devices.
- Lay cable and hook up electrical connections between machines, power sources, and phone lines.
- Enter information into computers to copy programs from one electronic component to another or to draw, modify, or store schematics.
- Fill machines with toners, inks, or other duplicating fluids.
- Train new repairers.
- Align, adjust, or calibrate equipment according to specifications.
- Test new systems to ensure that they are in working order.
- Calibrate testing instruments.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Operate machines to test functioning of parts or mechanisms.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Test components or circuits of faulty equipment to locate defects, using oscilloscopes, signal generators, ammeters, voltmeters, or special diagnostic software programs.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Calibrate thermostats for specified temperature or pressure settings.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
- Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
- Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
- Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Report hazardous field situations and damaged or missing meters.
- Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units.
- Mount and install meters and other electric equipment such as time clocks, transformers, and circuit breakers, using electricians' hand tools.
- Investigate instances of illegal tapping into service lines.
- Trace and tag meters or house lines.
- Repair electric meters and components, such as transformers and relays, and replace metering devices, dial glasses, and faulty or incorrect wiring, using hand tools.
- Replace defective parts, such as bellows, range springs, and toggle switches, and reassemble units according to blueprints, using cam presses and hand tools.
- Recondition displacement type gas meters and governors, fabricating, machining, or modifying parts needed for repairs.
- Measure tolerances of assembled and salvageable parts for conformance to standards or specifications, using gauges, micrometers, and calipers.
- Clean internal compartments and moving parts, using rags and cleaning compounds.
- Disconnect or remove defective or unauthorized meters, using hand tools.
- Reassemble repaired equipment, and solder top, front, and back case panels in place, using soldering guns, power tools, and hand tools.
- Attach air hoses to meter inlets, plug outlets, and observe gauges for pressure losses to test internal seams for leaks.
- Recommend and write up specifications for changes in hardware, such as house wiring.
- Clamp regulator units into vises on stages above water tanks, and attach compressed air hoses to intake ports.
- Repair leaks in valve seats or bellows of automotive heater thermostats, using soft solder, flux, and acetylene torches.
- Collect money due on delinquent accounts.
- Splice and connect cables from meters or current transformers to pull boxes or switchboards, using hand tools.
- Attach pressurized meters to fixtures which submerge them in water, and observe meters for leaks.
- Advise customers on proper installation of valves or regulators and related equipment.
- Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds.
- Connect hoses from provers to meter inlets and outlets, and raise prover bells until prover gauges register zero.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Calibrate thermostats for specified temperature or pressure settings.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
- Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
- Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
- Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Test operation of tower transmission components, using sweep testing tools or software.
- Install, connect, or test underground or aboveground grounding systems.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Run appropriate power, ground, or coaxial cables.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Replace existing antennas with new antennas as directed.
- Bolt equipment into place, using hand or power tools.
- Complete reports related to project status, progress, or other work details, using computer software.
- Transport equipment to work sites, using utility trucks and equipment trailers.
- Take site survey photos or photos of work performed, using digital cameras.
- Climb towers to access components, using safety equipment, such as full-body harnesses.
- Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Locate tower sites where work is to be performed, using mapping software.
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
- Mount equipment on transmission towers and in vehicles such as ships or ambulances.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Test emergency transmitters to ensure their readiness for immediate use.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Test operation of tower transmission components, using sweep testing tools or software.
- Install, connect, or test underground or aboveground grounding systems.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Test and adjust repaired systems to meet manufacturers' performance specifications.
- Repair, reline, replace, and adjust brakes.
- Test electronic computer components in automobiles to ensure proper operation.
- Tune automobile engines to ensure proper and efficient functioning.
- Repair, replace, or adjust defective fuel injectors, carburetor parts, and gasoline filters.
- Install, adjust, or repair hydraulic or electromagnetic automatic lift mechanisms used to raise and lower automobile windows, seats, and tops.
- Inspect vehicles for damage and record findings so that necessary repairs can be made.
- Test drive vehicles and test components and systems, using equipment such as infrared engine analyzers, compression gauges, and computerized diagnostic devices.
- Review work orders and discuss work with supervisors.
- Estimate costs of vehicle repair.
- Confer with customers to obtain descriptions of vehicle problems and to discuss work to be performed and future repair requirements.
- Align vehicles' front ends.
- Align wheels, axles, frames, torsion bars, and steering mechanisms of automobiles, using special alignment equipment and wheel-balancing machines.
- Tear down, repair, and rebuild faulty assemblies, such as power systems, steering systems, and linkages.
- Perform routine and scheduled maintenance services, such as oil changes, lubrications, and tune-ups.
- Plan work procedures, using charts, technical manuals, and experience.
- Follow checklists to ensure all important parts are examined, including belts, hoses, steering systems, spark plugs, brake and fuel systems, wheel bearings, and other potentially troublesome areas.
- Maintain cleanliness of work area.
- Change spark plugs, fuel filters, air filters, and batteries in hybrid electric vehicles.
- Repair and service air conditioning, heating, engine cooling, and electrical systems.
- Disassemble units and inspect parts for wear, using micrometers, calipers, and gauges.
- Overhaul or replace carburetors, blowers, generators, distributors, starters, and pumps.
- Repair or replace parts such as pistons, rods, gears, valves, and bearings.
- Rewire ignition systems, lights, and instrument panels.
- Troubleshoot fuel, ignition, and emissions control systems, using electronic testing equipment.
- Conduct visual inspections of compressed natural gas fuel systems to identify cracks, gouges, abrasions, discoloration, broken fibers, loose brackets, damaged gaskets, or other problems.
- Rebuild parts, such as crankshafts and cylinder blocks.
- Diagnose and replace or repair engine management systems or related sensors for flexible fuel vehicles (FFVs) with ignition timing, fuel rate, alcohol concentration, or air-to-fuel ratio malfunctions.
- Repair or rebuild transmissions.
- Retrofit vehicle fuel systems with aftermarket products, such as vapor transfer devices, evaporation control devices, swirlers, lean burn devices, and friction reduction devices, to enhance combustion and fuel efficiency.
- Test and adjust repaired systems to meet manufacturers' performance specifications.
- Repair, reline, replace, and adjust brakes.
- Test electronic computer components in automobiles to ensure proper operation.
- Tune automobile engines to ensure proper and efficient functioning.
- Repair, replace, or adjust defective fuel injectors, carburetor parts, and gasoline filters.
- Install, adjust, or repair hydraulic or electromagnetic automatic lift mechanisms used to raise and lower automobile windows, seats, and tops.
- Test structures, controls, or mechanical, hydraulic, or electrical systems, according to test plans or in coordination with engineers.
- Test electrical components of wind systems with devices, such as voltage testers, multimeters, oscilloscopes, infrared testers, or fiber optic equipment.
- Start or restart wind turbine generator systems to ensure proper operations.
- Collect turbine data for testing or research and analysis.
- Troubleshoot or repair mechanical, hydraulic, or electrical malfunctions related to variable pitch systems, variable speed control systems, converter systems, or related components.
- Perform routine maintenance on wind turbine equipment, underground transmission systems, wind fields substations, or fiber optic sensing and control systems.
- Diagnose problems involving wind turbine generators or control systems.
- Climb wind turbine towers to inspect, maintain, or repair equipment.
- Maintain tool and spare parts inventories required for repair, installation, or replacement services.
- Train end-users, distributors, installers, or other technicians in wind commissioning, testing, or other technical procedures.
- Inspect or repair fiberglass turbine blades.
- Assist in assembly of individual wind generators or construction of wind farms.
- Operate manufacturing equipment to fabricate wind turbines.
- Test structures, controls, or mechanical, hydraulic, or electrical systems, according to test plans or in coordination with engineers.
- Test electrical components of wind systems with devices, such as voltage testers, multimeters, oscilloscopes, infrared testers, or fiber optic equipment.
- Start or restart wind turbine generator systems to ensure proper operations.
- Collect turbine data for testing or research and analysis.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Set up and test industrial equipment to ensure that it functions properly.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Maintain equipment logs that record performance problems, repairs, calibrations, or tests.
- Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.
- Install repaired equipment in various settings, such as industrial or military establishments.
- Operate equipment to demonstrate proper use or to analyze malfunctions.
- Enter information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.
- Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.
- Consult with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.
- Maintain inventory of spare parts.
- Study blueprints, schematics, manuals, or other specifications to determine installation procedures.
- Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems.
- Coordinate efforts with other workers involved in installing or maintaining equipment or components.
- Develop or modify industrial electronic devices, circuits, or equipment, according to available specifications.
- Determine feasibility of using standardized equipment or develop specifications for equipment required to perform additional functions.
- Advise management regarding customer satisfaction, product performance, or suggestions for product improvements.
- Send defective units to the manufacturer or to a specialized repair shop for repair.
- Sign overhaul documents for equipment replaced or repaired.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Set up and test industrial equipment to ensure that it functions properly.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Adjust power production systems to meet load and distribution demands.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Collect and record data associated with operating geothermal power plants or well fields.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Identify equipment options, such as compressors, and make appropriate selections.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Install and maintain geothermal plant electrical protection equipment.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install and maintain geothermal system instrumentation or controls.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Test water sources for factors, such as flow volume and contaminant presence.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Backfill piping trenches to protect pipes from damage.
- Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Adjust power production systems to meet load and distribution demands.
- Test pipes, lines, components, and connections for leaks.
- Test electrical circuits or components for continuity, using electrical test equipment.
- Adjust system controls to settings recommended by manufacturer to balance system.
- Install, connect, or adjust thermostats, humidistats, or timers.
- Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
- Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
- Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
- Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.
- Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
- Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
- Repair or replace defective equipment, components, or wiring.
- Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
- Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.
- Braze or solder parts to repair defective joints and leaks.
- Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
- Perform mechanical overhauls and refrigerant reclaiming.
- Install expansion and control valves, using acetylene torches and wrenches.
- Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
- Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
- Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.
- Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
- Keep records of repairs and replacements made and causes of malfunctions.
- Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
- Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
- Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
- Supervise and instruct assistants.
- Lay out reference points for installation of structural and functional components, using measuring instruments.
- Lift and align components into position, using hoist or block and tackle.
- Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.
- Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
- Test pipes, lines, components, and connections for leaks.
- Test electrical circuits or components for continuity, using electrical test equipment.
- Adjust system controls to settings recommended by manufacturer to balance system.
- Install, connect, or adjust thermostats, humidistats, or timers.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Test equipment performance, focus of lens system, diaphragm alignment, lens mounts, or film transport, using precision gauges.
- Disassemble equipment to gain access to defect, using hand tools.
- Clean and lubricate cameras and polish camera lenses, using cleaning materials and work aids.
- Requisition parts or materials.
- Examine cameras, equipment, processed film, or laboratory reports to diagnose malfunction, using work aids and specifications.
- Read and interpret engineering drawings, diagrams, instructions, or specifications to determine needed repairs, fabrication method, and operation sequence.
- Measure parts to verify specified dimensions or settings, such as camera shutter speed or light meter reading accuracy, using measuring instruments.
- Fabricate or modify defective electronic, electrical, or mechanical components, using bench lathe, milling machine, shaper, grinder, or precision hand tools, according to specifications.
- Install electrical assemblies and wiring in aircraft camera housings and memory cards or film in cameras, following blueprints and using hand tools and soldering equipment.
- Assemble aircraft cameras, still or motion picture cameras, photographic equipment, or frames, using diagrams, blueprints, bench machines, hand tools, or power tools.
- Record test data and document fabrication techniques on reports.
- Lay out reference points and dimensions on parts or metal stock to be machined, using precision measuring instruments.
- Recommend design changes or upgrades of microfilming, film-developing, or photographic equipment.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Test equipment performance, focus of lens system, diaphragm alignment, lens mounts, or film transport, using precision gauges.
- Test plant equipment to ensure it is operating properly.
- Adjust controls of equipment to control particle beam movement, pulse rates, energy or intensity, or radiation, according to specifications.
- Set control panel switches to route electric power from sources and direct particle beams through injector units.
- Follow nuclear equipment operational policies and procedures that ensure environmental safety.
- Conduct surveillance testing to determine safety of nuclear equipment.
- Monitor nuclear reactor equipment performance to identify operational inefficiencies, hazards, or needs for maintenance or repair.
- Apply safety tags to equipment needing maintenance.
- Follow policies and procedures for radiation workers to ensure personnel safety.
- Modify, devise, or maintain nuclear equipment used in operations.
- Monitor instruments, gauges, or recording devices under direction of nuclear experimenters.
- Perform testing, maintenance, repair, or upgrading of accelerator systems.
- Warn maintenance workers of radiation hazards and direct workers to vacate hazardous areas.
- Calculate equipment operating factors, such as radiation times, dosages, temperatures, gamma intensities, or pressures, using standard formulas and conversion tables.
- Measure the intensity and identify the types of radiation in work areas, equipment, or materials, using radiation detectors or other instruments.
- Communicate with accelerator maintenance personnel to ensure readiness of support systems, such as vacuum, water cooling, or radio frequency power sources.
- Identify and implement appropriate decontamination procedures, based on equipment and the size, nature, and type of contamination.
- Decontaminate objects by cleaning them using soap or solvents or by abrading using brushes, buffing machines, or sandblasting machines.
- Prepare reports to communicate information such as contamination test results, decontamination results, or decontamination procedures.
- Collect air, water, gas or solid samples for testing to determine radioactivity levels or to ensure appropriate radioactive containment.
- Determine or recommend radioactive decontamination procedures, according to the size and nature of equipment and the degree of contamination.
- Set up equipment that automatically detects area radiation deviations and test detection equipment to ensure its accuracy.
- Test plant equipment to ensure it is operating properly.
- Adjust controls of equipment to control particle beam movement, pulse rates, energy or intensity, or radiation, according to specifications.
- Set control panel switches to route electric power from sources and direct particle beams through injector units.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Confer with customers to determine the nature of problems or to explain repairs.
- Position or mount speakers, and wire speakers to consoles.
- Instruct customers on the safe and proper use of equipment.
- Make service calls to repair units in customers' homes, or return units to shops for major repairs.
- Read and interpret electronic circuit diagrams, function block diagrams, specifications, engineering drawings, and service manuals.
- Keep records of work orders and test and maintenance reports.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Compute cost estimates for labor and materials.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Match light fixture settings, such as brightness and color, to lighting design plans.
- Test lighting equipment function and desired lighting effects.
- Assess safety of wiring or equipment set-up to determine the risk of fire or electrical shock.
- Consult with lighting director or production staff to determine lighting requirements.
- Disassemble and store equipment after performances.
- Install color effects or image patterns, such as color filters, onto lighting fixtures.
- Install electrical cables or wire fixtures.
- Load, unload, or position lighting equipment.
- Notify supervisors when major lighting equipment repairs are needed.
- Operate manual or automated systems to control lighting throughout productions.
- Patch or wire lights to dimmers or other electronic consoles.
- Perform minor repairs or routine maintenance on lighting equipment, such as replacing lamps or damaged color filters.
- Program lighting consoles or load automated lighting control systems onto consoles.
- Set up and focus light fixtures to meet requirements of television, theater, concerts, or other productions.
- Set up scaffolding or cranes to assist with setting up of lighting equipment.
- Visit and assess structural and electrical layout of locations before setting up lighting equipment.
- Match light fixture settings, such as brightness and color, to lighting design plans.
- Test lighting equipment function and desired lighting effects.
- Perform quality assurance system checks, such as calibrations, on treatment planning computers.
- Plan the use of beam modifying devices, such as compensators, shields, and wedge filters, to ensure safe and effective delivery of radiation treatment.
- Advise oncology team members on use of beam modifying or immobilization devices in radiation treatment plans.
- Calculate, or verify calculations of, prescribed radiation doses.
- Calculate the delivery of radiation treatment, such as the amount or extent of radiation per session, based on the prescribed course of radiation therapy.
- Conduct radiation oncology-related research, such as improving computer treatment planning systems or developing new treatment devices.
- Create and transfer reference images and localization markers for treatment delivery, using image-guided radiation therapy.
- Design the arrangement of radiation fields to reduce exposure to critical patient structures, such as organs, using computers, manuals, and guides.
- Develop radiation treatment plans in consultation with members of the radiation oncology team.
- Develop requirements for the use of patient immobilization devices and positioning aides, such as molds or casts, as part of treatment plans to ensure accurate delivery of radiation and comfort of patient.
- Develop treatment plans, and calculate doses for brachytherapy procedures.
- Educate patients regarding treatment plans, physiological reactions to treatment, or post-treatment care.
- Fabricate beam modifying devices, such as compensators, shields, and wedge filters.
- Fabricate patient immobilization devices, such as molds or casts, for radiation delivery.
- Identify and outline bodily structures, using imaging procedures, such as x-ray, magnetic resonance imaging, computed tomography, or positron emission tomography.
- Load, receive, or ship radioactive materials.
- Measure the amount of radioactivity in patients or equipment, using radiation monitoring devices.
- Record patient information, such as radiation doses administered, in patient records.
- Supervise or perform simulations for tumor localizations, using imaging methods such as magnetic resonance imaging, computed tomography, or positron emission tomography scans.
- Teach medical dosimetry, including its application, to students, radiation therapists, or residents.
- Perform quality assurance system checks, such as calibrations, on treatment planning computers.
- Plan the use of beam modifying devices, such as compensators, shields, and wedge filters, to ensure safe and effective delivery of radiation treatment.
- Test rigging to ensure safety and reliability.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Tilt, dip, and turn suspended loads to maneuver over, under, or around obstacles, using multi-point suspension techniques.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Dismantle and store rigging equipment after use.
- Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Align, level, and anchor machinery.
- Load machines onto trucks to prepare for transportation.
- Attach pulleys and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms, using bolts and clamps.
- Fabricate, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
- Clean and dress machine surfaces and component parts.
- Install ground rigging for yarding lines, attaching chokers to logs and to the lines.
- Test rigging to ensure safety and reliability.
- Conduct brake tests to determine the condition of brakes on trains.
- Observe train signals along routes and verify their meanings for engineers.
- Signal locomotive engineers to start or stop trains when coupling or uncoupling cars, using hand signals, lanterns, or radio communication.
- Pull or push track switches to reroute cars.
- Observe signals from other crew members so that work activities can be coordinated.
- Monitor trains as they go around curves to detect dragging equipment and smoking journal boxes.
- Inspect couplings, air hoses, journal boxes, and handbrakes to ensure that they are securely fastened and functioning properly.
- Observe tracks from left sides of locomotives to detect obstructions on tracks.
- Operate locomotives in emergency situations.
- Raise levers to couple and uncouple cars for makeup and breakup of trains.
- Climb ladders to tops of cars to set brakes.
- Receive oral or written instructions from yardmasters or yard conductors indicating track assignments and cars to be switched.
- Inspect locomotives to detect damaged or worn parts.
- Signal other workers to set brakes and to throw track switches when switching cars from trains to way stations.
- Check to see that trains are equipped with supplies such as fuel, water, and sand.
- Monitor oil, temperature, and pressure gauges on dashboards to determine if engines are operating safely and efficiently.
- Set flares, flags, lanterns, or torpedoes in front and at rear of trains during emergency stops to warn oncoming trains.
- Inspect tracks, cars, and engines for defects and to determine service needs, sending engines and cars for repairs as necessary.
- Start diesel engines to warm engines before runs.
- Make minor repairs to couplings, air hoses, and journal boxes, using hand tools.
- Connect air hoses to cars, using wrenches.
- Operate and drive locomotives, diesel switch engines, dinkey engines, flatcars, and railcars in train yards and at industrial sites.
- Refuel and lubricate engines.
- Ride atop cars that have been shunted, and turn handwheels to control speeds or stop cars at specified positions.
- Adjust controls to regulate air-conditioning, heating, and lighting on trains for comfort of passengers.
- Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
- Provide passengers with assistance entering and exiting trains.
- Answer questions from passengers concerning train rules, stations, and timetable information.
- Conduct brake tests to determine the condition of brakes on trains.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Notify supervisors or other personnel of production problems.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Recommend necessary corrective actions, based on inspection results.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Monitor machines that automatically measure, sort, or inspect products.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Inspect or test cleantech or green technology parts, products, or installations, such as fuel cells, solar panels, or air quality devices, for conformance to specifications or standards.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Compute defect percentages or averages, using formulas and calculators.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.