- Calibrate and align components, using scales, gauges, and other measuring instruments.
Occupations with related tasks Save Table: XLSX CSV
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Calibrate thermostats for specified temperature or pressure settings.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
- Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
- Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
- Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Report hazardous field situations and damaged or missing meters.
- Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units.
- Mount and install meters and other electric equipment such as time clocks, transformers, and circuit breakers, using electricians' hand tools.
- Investigate instances of illegal tapping into service lines.
- Trace and tag meters or house lines.
- Repair electric meters and components, such as transformers and relays, and replace metering devices, dial glasses, and faulty or incorrect wiring, using hand tools.
- Replace defective parts, such as bellows, range springs, and toggle switches, and reassemble units according to blueprints, using cam presses and hand tools.
- Recondition displacement type gas meters and governors, fabricating, machining, or modifying parts needed for repairs.
- Measure tolerances of assembled and salvageable parts for conformance to standards or specifications, using gauges, micrometers, and calipers.
- Clean internal compartments and moving parts, using rags and cleaning compounds.
- Disconnect or remove defective or unauthorized meters, using hand tools.
- Reassemble repaired equipment, and solder top, front, and back case panels in place, using soldering guns, power tools, and hand tools.
- Attach air hoses to meter inlets, plug outlets, and observe gauges for pressure losses to test internal seams for leaks.
- Recommend and write up specifications for changes in hardware, such as house wiring.
- Clamp regulator units into vises on stages above water tanks, and attach compressed air hoses to intake ports.
- Repair leaks in valve seats or bellows of automotive heater thermostats, using soft solder, flux, and acetylene torches.
- Collect money due on delinquent accounts.
- Splice and connect cables from meters or current transformers to pull boxes or switchboards, using hand tools.
- Attach pressurized meters to fixtures which submerge them in water, and observe meters for leaks.
- Advise customers on proper installation of valves or regulators and related equipment.
- Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds.
- Connect hoses from provers to meter inlets and outlets, and raise prover bells until prover gauges register zero.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Calibrate thermostats for specified temperature or pressure settings.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
- Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
- Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
- Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
- Align, adjust, or calibrate equipment according to specifications.
- Calibrate testing instruments.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Reassemble machines after making repairs or replacing parts.
- Converse with customers to determine details of equipment problems.
- Disassemble machines to examine parts, such as wires, gears, or bearings for wear or defects, using hand or power tools and measuring devices.
- Advise customers concerning equipment operation, maintenance, or programming.
- Travel to customers' stores or offices to service machines or to provide emergency repair service.
- Maintain parts inventories and order any additional parts needed for repairs.
- Operate machines to test functioning of parts or mechanisms.
- Reinstall software programs or adjust settings on existing software to fix machine malfunctions.
- Maintain records of equipment maintenance work or repairs.
- Test new systems to ensure that they are in working order.
- Complete repair bills, shop records, time cards, or expense reports.
- Install and configure new equipment, including operating software or peripheral equipment.
- Analyze equipment performance records to assess equipment functioning.
- Read specifications, such as blueprints, charts, or schematics, to determine machine settings or adjustments.
- Update existing equipment, performing tasks such as installing updated circuit boards or additional memory.
- Test components or circuits of faulty equipment to locate defects, using oscilloscopes, signal generators, ammeters, voltmeters, or special diagnostic software programs.
- Assemble machines according to specifications, using hand or power tools and measuring devices.
- Lay cable and hook up electrical connections between machines, power sources, and phone lines.
- Enter information into computers to copy programs from one electronic component to another or to draw, modify, or store schematics.
- Fill machines with toners, inks, or other duplicating fluids.
- Train new repairers.
- Align, adjust, or calibrate equipment according to specifications.
- Calibrate testing instruments.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Adjust power production systems to meet load and distribution demands.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Collect and record data associated with operating geothermal power plants or well fields.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Identify equipment options, such as compressors, and make appropriate selections.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Install and maintain geothermal plant electrical protection equipment.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install and maintain geothermal system instrumentation or controls.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Test water sources for factors, such as flow volume and contaminant presence.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Backfill piping trenches to protect pipes from damage.
- Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Adjust power production systems to meet load and distribution demands.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Confer with customers to determine the nature of problems or to explain repairs.
- Position or mount speakers, and wire speakers to consoles.
- Instruct customers on the safe and proper use of equipment.
- Make service calls to repair units in customers' homes, or return units to shops for major repairs.
- Read and interpret electronic circuit diagrams, function block diagrams, specifications, engineering drawings, and service manuals.
- Keep records of work orders and test and maintenance reports.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Compute cost estimates for labor and materials.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Disassemble equipment to gain access to defect, using hand tools.
- Test equipment performance, focus of lens system, diaphragm alignment, lens mounts, or film transport, using precision gauges.
- Clean and lubricate cameras and polish camera lenses, using cleaning materials and work aids.
- Requisition parts or materials.
- Examine cameras, equipment, processed film, or laboratory reports to diagnose malfunction, using work aids and specifications.
- Read and interpret engineering drawings, diagrams, instructions, or specifications to determine needed repairs, fabrication method, and operation sequence.
- Measure parts to verify specified dimensions or settings, such as camera shutter speed or light meter reading accuracy, using measuring instruments.
- Fabricate or modify defective electronic, electrical, or mechanical components, using bench lathe, milling machine, shaper, grinder, or precision hand tools, according to specifications.
- Install electrical assemblies and wiring in aircraft camera housings and memory cards or film in cameras, following blueprints and using hand tools and soldering equipment.
- Assemble aircraft cameras, still or motion picture cameras, photographic equipment, or frames, using diagrams, blueprints, bench machines, hand tools, or power tools.
- Record test data and document fabrication techniques on reports.
- Lay out reference points and dimensions on parts or metal stock to be machined, using precision measuring instruments.
- Recommend design changes or upgrades of microfilming, film-developing, or photographic equipment.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Maintain equipment logs that record performance problems, repairs, calibrations, or tests.
- Set up and test industrial equipment to ensure that it functions properly.
- Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.
- Install repaired equipment in various settings, such as industrial or military establishments.
- Operate equipment to demonstrate proper use or to analyze malfunctions.
- Enter information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.
- Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.
- Consult with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.
- Maintain inventory of spare parts.
- Study blueprints, schematics, manuals, or other specifications to determine installation procedures.
- Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems.
- Coordinate efforts with other workers involved in installing or maintaining equipment or components.
- Develop or modify industrial electronic devices, circuits, or equipment, according to available specifications.
- Determine feasibility of using standardized equipment or develop specifications for equipment required to perform additional functions.
- Advise management regarding customer satisfaction, product performance, or suggestions for product improvements.
- Send defective units to the manufacturer or to a specialized repair shop for repair.
- Sign overhaul documents for equipment replaced or repaired.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Perform quality assurance system checks, such as calibrations, on treatment planning computers.
- Plan the use of beam modifying devices, such as compensators, shields, and wedge filters, to ensure safe and effective delivery of radiation treatment.
- Advise oncology team members on use of beam modifying or immobilization devices in radiation treatment plans.
- Calculate, or verify calculations of, prescribed radiation doses.
- Calculate the delivery of radiation treatment, such as the amount or extent of radiation per session, based on the prescribed course of radiation therapy.
- Conduct radiation oncology-related research, such as improving computer treatment planning systems or developing new treatment devices.
- Create and transfer reference images and localization markers for treatment delivery, using image-guided radiation therapy.
- Design the arrangement of radiation fields to reduce exposure to critical patient structures, such as organs, using computers, manuals, and guides.
- Develop radiation treatment plans in consultation with members of the radiation oncology team.
- Develop requirements for the use of patient immobilization devices and positioning aides, such as molds or casts, as part of treatment plans to ensure accurate delivery of radiation and comfort of patient.
- Develop treatment plans, and calculate doses for brachytherapy procedures.
- Educate patients regarding treatment plans, physiological reactions to treatment, or post-treatment care.
- Fabricate beam modifying devices, such as compensators, shields, and wedge filters.
- Fabricate patient immobilization devices, such as molds or casts, for radiation delivery.
- Identify and outline bodily structures, using imaging procedures, such as x-ray, magnetic resonance imaging, computed tomography, or positron emission tomography.
- Load, receive, or ship radioactive materials.
- Measure the amount of radioactivity in patients or equipment, using radiation monitoring devices.
- Record patient information, such as radiation doses administered, in patient records.
- Supervise or perform simulations for tumor localizations, using imaging methods such as magnetic resonance imaging, computed tomography, or positron emission tomography scans.
- Teach medical dosimetry, including its application, to students, radiation therapists, or residents.
- Perform quality assurance system checks, such as calibrations, on treatment planning computers.
- Plan the use of beam modifying devices, such as compensators, shields, and wedge filters, to ensure safe and effective delivery of radiation treatment.
- Test or calibrate components or equipment, following manufacturers' manuals and troubleshooting techniques, using hand tools, power tools, or measuring devices.
- Perform preventive maintenance or service, such as cleaning, lubricating, or adjusting equipment.
- Inspect, test, or troubleshoot malfunctioning medical or related equipment, following manufacturers' specifications and using test and analysis instruments.
- Keep records of maintenance, repair, and required updates of equipment.
- Disassemble malfunctioning equipment and remove, repair, or replace defective parts, such as motors, clutches, or transformers.
- Examine medical equipment or facility's structural environment and check for proper use of equipment to protect patients and staff from electrical or mechanical hazards and to ensure compliance with safety regulations.
- Install medical equipment.
- Test, evaluate, and classify excess or in-use medical equipment and determine serviceability, condition, and disposition, in accordance with regulations.
- Plan and carry out work assignments, using blueprints, schematic drawings, technical manuals, wiring diagrams, or liquid or air flow sheets, following prescribed regulations, directives, or other instructions as required.
- Study technical manuals or attend training sessions provided by equipment manufacturers to maintain current knowledge.
- Explain or demonstrate correct operation or preventive maintenance of medical equipment to personnel.
- Research catalogs or repair part lists to locate sources for repair parts, requisitioning parts and recording their receipt.
- Repair shop equipment, metal furniture, or hospital equipment, including welding broken parts or replacing missing parts, or bring item into local shop for major repairs.
- Solder loose connections, using soldering iron.
- Compute power and space requirements for installing medical, dental, or related equipment and install units to manufacturers' specifications.
- Evaluate technical specifications to identify equipment or systems best suited for intended use and possible purchase, based on specifications, user needs, or technical requirements.
- Contribute expertise to develop medical maintenance standard operating procedures.
- Fabricate, dress down, or substitute parts or major new items to modify equipment to meet unique operational or research needs, working from job orders, sketches, modification orders, samples, or discussions with operating officials.
- Supervise or advise subordinate personnel.
- Make computations relating to load requirements of wiring or equipment, using algebraic expressions and standard formulas.
- Test or calibrate components or equipment, following manufacturers' manuals and troubleshooting techniques, using hand tools, power tools, or measuring devices.
- Perform preventive maintenance or service, such as cleaning, lubricating, or adjusting equipment.
- Match light fixture settings, such as brightness and color, to lighting design plans.
- Assess safety of wiring or equipment set-up to determine the risk of fire or electrical shock.
- Consult with lighting director or production staff to determine lighting requirements.
- Disassemble and store equipment after performances.
- Install color effects or image patterns, such as color filters, onto lighting fixtures.
- Install electrical cables or wire fixtures.
- Load, unload, or position lighting equipment.
- Notify supervisors when major lighting equipment repairs are needed.
- Operate manual or automated systems to control lighting throughout productions.
- Patch or wire lights to dimmers or other electronic consoles.
- Perform minor repairs or routine maintenance on lighting equipment, such as replacing lamps or damaged color filters.
- Program lighting consoles or load automated lighting control systems onto consoles.
- Set up and focus light fixtures to meet requirements of television, theater, concerts, or other productions.
- Set up scaffolding or cranes to assist with setting up of lighting equipment.
- Test lighting equipment function and desired lighting effects.
- Visit and assess structural and electrical layout of locations before setting up lighting equipment.
- Match light fixture settings, such as brightness and color, to lighting design plans.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Notify supervisors or other personnel of production problems.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Recommend necessary corrective actions, based on inspection results.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Monitor machines that automatically measure, sort, or inspect products.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Inspect or test cleantech or green technology parts, products, or installations, such as fuel cells, solar panels, or air quality devices, for conformance to specifications or standards.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Compute defect percentages or averages, using formulas and calculators.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
