- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 6 | 3 | 49-2021.00 | Radio, Cellular, and Tower Equipment Installers and Repairers 
|
| 1 | 4 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
| 1 | 3 | 3 | 49-2094.00 | Electrical and Electronics Repairers, Commercial and Industrial Equipment |
| 1 | 3 | 2 | 49-9044.00 | Millwrights |
| 1 | 2 | 3 | 49-2095.00 | Electrical and Electronics Repairers, Powerhouse, Substation, and Relay
|
| 1 | 2 | 3 | 49-9043.00 | Maintenance Workers, Machinery |
| 1 | 2 | 2 | 49-9051.00 | Electrical Power-Line Installers and Repairers
|
| 1 | 1 | 2 | 49-9095.00 | Manufactured Building and Mobile Home Installers
|
| 1 | 1 | 2 | 43-5041.00 | Meter Readers, Utilities |
| 1 | 1 | 2 | 49-9096.00 | Riggers |
| 1 | 1 | 3 | 49-9092.00 | Commercial Divers
|
| 1 | 1 | 3 | 49-3011.00 | Aircraft Mechanics and Service Technicians |
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Run appropriate power, ground, or coaxial cables.
- Test operation of tower transmission components, using sweep testing tools or software.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Replace existing antennas with new antennas as directed.
- Bolt equipment into place, using hand or power tools.
- Install, connect, or test underground or aboveground grounding systems.
- Complete reports related to project status, progress, or other work details, using computer software.
- Transport equipment to work sites, using utility trucks and equipment trailers.
- Take site survey photos or photos of work performed, using digital cameras.
- Climb towers to access components, using safety equipment, such as full-body harnesses.
- Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Locate tower sites where work is to be performed, using mapping software.
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
- Mount equipment on transmission towers and in vehicles such as ships or ambulances.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Test emergency transmitters to ensure their readiness for immediate use.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Use drone technology to inspect towers and antennas for damage or maintenance needs.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Set machinery for proper performance, using computers.
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Lubricate moving parts.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Weld, braze, or solder electrical connections.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Rewire electrical systems, and repair or replace electrical accessories.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Repair and operate battery-charging equipment.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Test battery charges, and replace or recharge batteries as necessary.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Set machinery for proper performance, using computers.
- Coordinate efforts with other workers involved in installing or maintaining equipment or components.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
- Maintain equipment logs that record performance problems, repairs, calibrations, or tests.
- Set up and test industrial equipment to ensure that it functions properly.
- Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.
- Install repaired equipment in various settings, such as industrial or military establishments.
- Operate equipment to demonstrate proper use or to analyze malfunctions.
- Enter information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.
- Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.
- Consult with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.
- Maintain inventory of spare parts.
- Study blueprints, schematics, manuals, or other specifications to determine installation procedures.
- Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems.
- Develop or modify industrial electronic devices, circuits, or equipment, according to available specifications.
- Determine feasibility of using standardized equipment or develop specifications for equipment required to perform additional functions.
- Advise management regarding customer satisfaction, product performance, or suggestions for product improvements.
- Send defective units to the manufacturer or to a specialized repair shop for repair.
- Sign overhaul documents for equipment replaced or repaired.
- Coordinate efforts with other workers involved in installing or maintaining equipment or components.
- Calibrate testing instruments and installed or repaired equipment to prescribed specifications.
- Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Assemble and install equipment, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Weld, repair, and fabricate equipment or machinery.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Install robot and modify its program, using teach pendant.
- Inventory and store parts, tools, and equipment.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Notify facility personnel of equipment shutdowns.
- Inspect and test equipment and circuits to identify malfunctions or defects, using wiring diagrams and testing devices such as ohmmeters, voltmeters, or ammeters.
- Prepare and maintain records detailing tests, repairs, and maintenance.
- Consult manuals, schematics, wiring diagrams, and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning.
- Analyze test data to diagnose malfunctions, to determine performance characteristics of systems, or to evaluate effects of system modifications.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Run signal quality and connectivity tests for individual cables, and record results.
- Maintain inventories of spare parts for all equipment, requisitioning parts as necessary.
- Construct, test, maintain, and repair substation relay and control systems.
- Test insulators and bushings of equipment by inducing voltage across insulation, testing current, and calculating insulation loss.
- Schedule and supervise the construction and testing of special devices and the implementation of unique monitoring or control systems.
- Schedule and supervise splicing or termination of cables in color-code order.
- Test oil in circuit breakers and transformers for dielectric strength, refilling oil periodically.
- Disconnect voltage regulators, bolts, and screws, and connect replacement regulators to high-voltage lines.
- Calibrate instruments, such as transmitters.
- Use drones for inspection of high-voltage lines and other hard-to-reach equipment.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Notify facility personnel of equipment shutdowns.
- Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
- Set up and operate machines, and adjust controls to regulate operations.
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
- Reassemble machines after the completion of repair or maintenance work.
- Record production, repair, and machine maintenance information.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
- Install, replace, or change machine parts and attachments, according to production specifications.
- Collaborate with other workers to repair or move machines, machine parts, or equipment.
- Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
- Start machines and observe mechanical operation to determine efficiency and to detect problems.
- Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
- Collect and discard worn machine parts and other refuse to maintain machinery and work areas.
- Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.
- Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.
- Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.
- Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
- Replace or repair metal, wood, leather, glass, or other lining in machines, or in equipment compartments or containers.
- Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and equipment.
- Troubleshoot electrical, hydraulic, or mechanical equipment and machines.
- Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
- Set up and operate machines, and adjust controls to regulate operations.
- Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.
- Coordinate work assignment preparation and completion with other workers.
- Adhere to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas.
- Drive vehicles equipped with tools and materials to job sites.
- Climb poles or use truck-mounted buckets to access equipment.
- Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.
- Inspect and test power lines and auxiliary equipment to locate and identify problems, using reading and testing instruments.
- Replace or straighten damaged poles.
- String wire conductors and cables between poles, towers, trenches, pylons, and buildings, setting lines in place and using winches to adjust tension.
- Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.
- Dig holes, using augers, and set poles, using cranes and power equipment.
- Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.
- Identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.
- Install watt-hour meters and connect service drops between power lines and consumers' facilities.
- Test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.
- Place insulating or fireproofing materials over conductors and joints.
- Splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.
- Trim trees that could be hazardous to the functioning of cables or wires.
- Pull up cable by hand from large reels mounted on trucks.
- Lay underground cable directly in trenches, or string it through conduit running through the trenches.
- Cut trenches for laying underground cables, using trenchers and cable plows.
- Cut and peel lead sheathing and insulation from defective or newly installed cables and conduits prior to splicing.
- Clean, tin, and splice corresponding conductors by twisting ends together or by joining ends with metal clamps and soldering connections.
- Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.
- Coordinate work assignment preparation and completion with other workers.
- Connect electrical systems to outside power sources and activate switches to test the operation of appliances and light fixtures.
- Seal open sides of modular units to prepare them for shipment, using polyethylene sheets, nails, and hammers.
- Move and set up mobile homes or prefabricated buildings on owners' lots or at mobile home parks.
- Inspect, examine, and test the operation of parts or systems to evaluate operating condition and to determine if repairs are needed.
- Connect water hoses to inlet pipes of plumbing systems, and test operation of plumbing fixtures.
- Remove damaged exterior panels, repair and replace structural frame members, and seal leaks, using hand tools.
- List parts needed, estimate costs, and plan work procedures, using parts lists, technical manuals, and diagrams.
- Confer with customers or read work orders to determine the nature and extent of damage to units.
- Install, repair, and replace units, fixtures, appliances, and other items and systems in mobile and modular homes, prefabricated buildings, or travel trailers, using hand tools or power tools.
- Reset hardware, using chisels, mallets, and screwdrivers.
- Repair leaks in plumbing or gas lines, using caulking compounds and plastic or copper pipe.
- Locate and repair frayed wiring, broken connections, or incorrect wiring, using ohmmeters, soldering irons, tape, and hand tools.
- Open and close doors, windows, and drawers to test their operation, trimming edges to fit, using jackplanes or drawknives.
- Refinish wood surfaces on cabinets, doors, moldings, and floors, using power sanders, putty, spray equipment, brushes, paints, or varnishes.
- Connect electrical systems to outside power sources and activate switches to test the operation of appliances and light fixtures.
- Connect and disconnect utility services at specific locations.
- Read electric, gas, water, or steam consumption meters and enter data in route books or hand-held computers.
- Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.
- Walk or drive vehicles along established routes to take readings of meter dials.
- Inspect meters for unauthorized connections, defects, and damage, such as broken seals.
- Verify readings in cases where consumption appears to be abnormal, and record possible reasons for fluctuations.
- Report to service departments any problems, such as meter irregularities, damaged equipment, or impediments to meter access, including dogs.
- Leave messages to arrange different times to read meters in cases in which meters are not accessible.
- Answer customers' questions about services and charges, or direct them to customer service centers.
- Update client address and meter location information.
- Perform preventative maintenance or minor repairs on meters.
- Report lost or broken keys.
- Dig dirt away from meters to take readings.
- Install new or replace broken meters.
- Connect and disconnect utility services at specific locations.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Test rigging to ensure safety and reliability.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Tilt, dip, and turn suspended loads to maneuver over, under, or around obstacles, using multi-point suspension techniques.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Dismantle and store rigging equipment after use.
- Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Align, level, and anchor machinery.
- Load machines onto trucks to prepare for transportation.
- Attach pulleys and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms, using bolts and clamps.
- Fabricate, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
- Clean and dress machine surfaces and component parts.
- Install ground rigging for yarding lines, attaching chokers to logs and to the lines.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Take appropriate safety precautions, such as monitoring dive lengths and depths and registering with authorities before diving expeditions begin.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Descend into water with the aid of diver helpers, using scuba gear or diving suits.
- Obtain information about diving tasks and environmental conditions.
- Supervise or train other divers, including hobby divers.
- Inspect the condition of underwater steel or wood structures.
- Inspect and test docks, ships, buoyage systems, plant intakes or outflows, or underwater pipelines, cables, or sewers, using closed circuit television, still photography, and testing equipment.
- Repair ships, bridge foundations, or other structures below the water line, using caulk, bolts, and hand tools.
- Recover objects by placing rigging around sunken objects, hooking rigging to crane lines, and operating winches, derricks, or cranes to raise objects.
- Operate underwater video, sonar, recording, or related equipment to investigate underwater structures or marine life.
- Take test samples or photographs to assess the condition of vessels or structures.
- Cut and weld steel, using underwater welding equipment, jigs, and supports.
- Install, inspect, clean, or repair piping or valves.
- Carry out non-destructive testing, such as tests for cracks on the legs of oil rigs at sea.
- Install pilings or footings for piers or bridges.
- Salvage wrecked ships or their cargo, using pneumatic power velocity and hydraulic tools and explosive charges, when necessary.
- Remove obstructions from strainers or marine railway or launching ways, using pneumatic or power hand tools.
- Set or guide placement of pilings or sandbags to provide support for structures, such as docks, bridges, cofferdams, or platforms.
- Perform activities related to underwater search and rescue, salvage, recovery, or cleanup operations.
- Perform offshore oil or gas exploration or extraction duties, such as conducting underwater surveys or repairing and maintaining drilling rigs or platforms.
- Drill holes in rock and rig explosives for underwater demolitions.
- Remove rubbish or pollution from the sea.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Inspect airframes for wear or other defects.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Measure parts for wear, using precision instruments.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Measure the tension of control cables.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Obtain fuel and oil samples and check them for contamination.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, refuel, and change oil in line service aircraft.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Determine repair limits for engine hot section parts.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Cure bonded structures, using portable or stationary curing equipment.
- Prepare and paint aircraft surfaces.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
