- Notify other workers of defects, and direct them to adjust extruding and forming machines.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
3 | 3 | 2 | 51-4191.00 | Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic |
2 | 2 | 2 | 51-4052.00 | Pourers and Casters, Metal |
2 | 2 | 2 | 51-3093.00 | Food Cooking Machine Operators and Tenders |
2 | 2 | 2 | 51-8092.00 | Gas Plant Operators |
2 | 2 | 2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
2 | 2 | 2 | 51-8093.00 | Petroleum Pump System Operators, Refinery Operators, and Gaugers |
2 | 2 | 2 | 51-9198.00 | Helpers--Production Workers |
1 | 2 | 2 | 43-5041.00 | Meter Readers, Utilities |
1 | 1 | 2 | 51-4071.00 | Foundry Mold and Coremakers |
1 | 1 | 2 | 51-4051.00 | Metal-Refining Furnace Operators and Tenders |
1 | 1 | 2 | 51-9191.00 | Adhesive Bonding Machine Operators and Tenders |
1 | 1 | 2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 2 | 51-8013.03 | Biomass Plant Technicians |
1 | 1 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 2 | 51-6062.00 | Textile Cutting Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-8099.01 | Biofuels Processing Technicians |
1 | 1 | 2 | 51-8091.00 | Chemical Plant and System Operators |
1 | 1 | 2 | 51-9193.00 | Cooling and Freezing Equipment Operators and Tenders
|
1 | 1 | 2 | 11-9071.00 | Gambling Managers |
1 | 1 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 3 | 51-8011.00 | Nuclear Power Reactor Operators |
1 | 1 | 2 | 51-9111.00 | Packaging and Filling Machine Operators and Tenders
|
1 | 1 | 2 | 51-6063.00 | Textile Knitting and Weaving Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 43-5111.00 | Weighers, Measurers, Checkers, and Samplers, Recordkeeping |
1 | 1 | 2 | 51-9011.00 | Chemical Equipment Operators and Tenders |
1 | 1 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
1 | 1 | 2 | 51-6061.00 | Textile Bleaching and Dyeing Machine Operators and Tenders |
1 | 1 | 2 | 51-6064.00 | Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-3092.00 | Food Batchmakers
|
1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
1 | 1 | 2 | 51-8013.00 | Power Plant Operators |
1 | 1 | 2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
1 | 1 | 2 | 51-9061.00 | Inspectors, Testers, Sorters, Samplers, and Weighers |
- Start conveyors and open furnace doors to load stock, or signal crane operators to uncover soaking pits and lower ingots into them.
- Place completed workpieces on conveyors, using cold rods, tongs, or chain hoists, or signal crane operators to transport them to subsequent stations.
- Signal forklift operators to deposit or extract containers of parts into and from furnaces and quenching rinse tanks.
- Read production schedules and work orders to determine processing sequences, furnace temperatures, and heat cycle requirements for objects to be heat-treated.
- Record times that parts are removed from furnaces to document that objects have attained specified temperatures for specified times.
- Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges of furnaces, and color of stock in furnaces to make setting determinations.
- Set up and operate or tend machines, such as furnaces, baths, flame-hardening machines, and electronic induction machines, that harden, anneal, and heat-treat metal.
- Remove parts from furnaces after specified times, and air dry or cool parts in water, oil brine, or other baths.
- Move controls to light gas burners and to adjust gas and water flow and flame temperature.
- Instruct new workers in machine operation.
- Determine flame temperatures, current frequencies, heating cycles, and induction heating coils needed, based on degree of hardness required and properties of stock to be treated.
- Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment, and metals.
- Set up and operate die-quenching machines to prevent parts from warping.
- Examine parts to ensure metal shades and colors conform to specifications, using knowledge of metal heat-treating.
- Set and adjust speeds of reels and conveyors for prescribed time cycles to pass parts through continuous furnaces.
- Load parts into containers and place containers on conveyors to be inserted into furnaces, or insert parts into furnaces.
- Test parts for hardness, using hardness testing equipment, or by examining and feeling samples.
- Mount workpieces in fixtures, on arbors, or between centers of machines.
- Reduce heat when processing is complete to allow parts to cool in furnaces or machinery.
- Mount fixtures and industrial coils on machines, using hand tools.
- Heat billets, bars, plates, rods, and other stock to specified temperatures preparatory to forging, rolling, or processing, using oil, gas, or electrical furnaces.
- Position stock in furnaces, using tongs, chain hoists, or pry bars.
- Repair, replace, and maintain furnace equipment as needed, using hand tools.
- Clean oxides and scales from parts or fittings, using steam sprays or chemical and water baths.
- Stamp heat-treatment identification marks on parts, using hammers and punches.
- Position parts in plastic bags, and seal bags with irons.
- Start conveyors and open furnace doors to load stock, or signal crane operators to uncover soaking pits and lower ingots into them.
- Place completed workpieces on conveyors, using cold rods, tongs, or chain hoists, or signal crane operators to transport them to subsequent stations.
- Signal forklift operators to deposit or extract containers of parts into and from furnaces and quenching rinse tanks.
- Collect samples, or signal workers to sample metal for analysis.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Add metal to molds to compensate for shrinkage.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Transport metal ingots to storage areas, using forklifts.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Collect samples, or signal workers to sample metal for analysis.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Notify or signal other workers to operate equipment or when processing is complete.
- Clean, wash, and sterilize equipment and cooking area, using water hoses, cleaning or sterilizing solutions, or rinses.
- Read work orders, recipes, or formulas to determine cooking times and temperatures, and ingredient specifications.
- Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate temperature, pressure, and flow of ingredients.
- Measure or weigh ingredients, using scales or measuring containers.
- Tend or operate and control equipment, such as kettles, cookers, vats and tanks, and boilers, to cook ingredients or prepare products for further processing.
- Record production and test data, such as processing steps, temperature and steam readings, cooking time, batches processed, and test results.
- Set temperature, pressure, and time controls, and start conveyers, machines, or pumps.
- Remove cooked material or products from equipment.
- Collect and examine product samples during production to test them for quality, color, content, consistency, viscosity, acidity, or specific gravity.
- Pour, dump, or load prescribed quantities of ingredients or products into cooking equipment, manually or using a hoist.
- Turn valves or start pumps to add ingredients or drain products from equipment and to transfer products for storage, cooling, or further processing.
- Admit required amounts of water, steam, cooking oils, or compressed air into equipment, such as by opening water valves to cool mixtures to the desired consistency.
- Activate agitators and paddles to mix or stir ingredients, stopping machines when ingredients are thoroughly mixed.
- Operate auxiliary machines and equipment, such as grinders, canners, and molding presses, to prepare or further process products.
- Place products on conveyors or carts, and monitor product flow.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Notify or signal other workers to operate equipment or when processing is complete.
- Contact maintenance crews when necessary.
- Signal or direct workers who tend auxiliary equipment.
- Monitor equipment functioning, observe temperature, level, and flow gauges, and perform regular unit checks to ensure that all equipment is operating as it should.
- Distribute or process gas for utility companies or industrial plants, using panel boards, control boards, and semi-automatic equipment.
- Control operation of compressors, scrubbers, evaporators, and refrigeration equipment to liquefy, compress, or regasify natural gas.
- Control equipment to regulate flow and pressure of gas to feedlines of boilers, furnaces, and related steam-generating or heating equipment.
- Record, review, and compile operations records, test results, and gauge readings such as temperatures, pressures, concentrations, and flows.
- Determine causes of abnormal pressure variances, and make corrective recommendations, such as installation of pipes to relieve overloading.
- Adjust temperature, pressure, vacuum, level, flow rate, or transfer of gas to maintain processes at required levels or to correct problems.
- Collaborate with other operators to solve unit problems.
- Monitor transportation and storage of flammable and other potentially dangerous products to ensure that safety guidelines are followed.
- Start and shut down plant equipment.
- Read logsheets to determine product demand and disposition, or to detect malfunctions.
- Test gas, chemicals, and air during processing to assess factors such as purity and moisture content, and to detect quality problems or gas or chemical leaks.
- Clean, maintain, and repair equipment, using hand tools, or request that repair and maintenance work be performed.
- Control fractioning columns, compressors, purifying towers, heat exchangers, and related equipment to extract nitrogen and oxygen from air.
- Calculate gas ratios to detect deviations from specifications, using testing apparatus.
- Operate construction equipment to install and maintain gas distribution systems.
- Change charts in recording meters.
- Contact maintenance crews when necessary.
- Signal or direct workers who tend auxiliary equipment.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Signal coworkers to synchronize flow of materials.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Dump sugar dust from collectors into melting tanks and add water to reclaim sugar lost during processing.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Signal coworkers to synchronize flow of materials.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Calculate test result values, using standard formulas.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Clamp seals around valves to secure tanks.
- Coordinate shutdowns and major projects.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Lower thermometers into tanks to obtain temperature readings.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Signal coworkers to direct them to move products during the production process.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Wash work areas, machines, equipment, vehicles, or products.
- Fold products and product parts during processing.
- Break up defective products for reprocessing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Signal coworkers to direct them to move products during the production process.
- Report lost or broken keys.
- Report to service departments any problems, such as meter irregularities, damaged equipment, or impediments to meter access, including dogs.
- Read electric, gas, water, or steam consumption meters and enter data in route books or hand-held computers.
- Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.
- Walk or drive vehicles along established routes to take readings of meter dials.
- Inspect meters for unauthorized connections, defects, and damage, such as broken seals.
- Verify readings in cases where consumption appears to be abnormal, and record possible reasons for fluctuations.
- Leave messages to arrange different times to read meters in cases in which meters are not accessible.
- Connect and disconnect utility services at specific locations.
- Answer customers' questions about services and charges, or direct them to customer service centers.
- Update client address and meter location information.
- Perform preventative maintenance or minor repairs on meters.
- Collect past-due bills.
- Report lost or broken keys.
- Report to service departments any problems, such as meter irregularities, damaged equipment, or impediments to meter access, including dogs.
- Move and position workpieces, such as mold sections, patterns, and bottom boards, using cranes, or signal others to move workpieces.
- Clean and smooth molds, cores, and core boxes, and repair surface imperfections.
- Sift and pack sand into mold sections, core boxes, and pattern contours, using hand or pneumatic ramming tools.
- Position patterns inside mold sections, and clamp sections together.
- Position cores into lower sections of molds, and reassemble molds for pouring.
- Sprinkle or spray parting agents onto patterns and mold sections to facilitate removal of patterns from molds.
- Form and assemble slab cores around patterns, and position wire in mold sections to reinforce molds, using hand tools and glue.
- Lift upper mold sections from lower sections, and remove molded patterns.
- Cut spouts, runner holes, and sprue holes into molds.
- Tend machines that bond cope and drag together to form completed shell molds.
- Rotate sweep boards around spindles to make symmetrical molds for convex impressions.
- Pour molten metal into molds, manually or with crane ladles.
- Operate ovens or furnaces to bake cores or to melt, skim, and flux metal.
- Move and position workpieces, such as mold sections, patterns, and bottom boards, using cranes, or signal others to move workpieces.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Operate controls to move or discharge metal workpieces from furnaces.
- Inspect furnaces and equipment to locate defects and wear.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Align and position materials being joined to ensure accurate application of adhesive or heat sealing.
- Adjust machine components according to specifications such as widths, lengths, and thickness of materials and amounts of glue, cement, or adhesive required.
- Start machines, and turn valves or move controls to feed, admit, apply, or transfer materials and adhesives, and to adjust temperature, pressure, and time settings.
- Fill machines with glue, cement, or adhesives.
- Perform test production runs and make adjustments as necessary to ensure that completed products meet standards and specifications.
- Examine and measure completed materials or products to verify conformance to specifications, using measuring devices such as tape measures, gauges, or calipers.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Remove and stack completed materials or products, and restock materials to be joined.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Maintain production records such as quantities, dimensions, and thicknesses of materials processed.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Mount or load material such as paper, plastic, wood, or rubber in feeding mechanisms of cementing or gluing machines.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Measure and mix ingredients to prepare glue.
- Depress pedals to lower electrodes that heat and seal edges of material.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Observe drilling or boring machine operations to detect any problems.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Inspect biomass power plant or processing equipment, recording or reporting damage and mechanical problems.
- Operate biomass fuel-burning boiler or biomass fuel gasification system equipment in accordance with specifications or instructions.
- Perform tests of water chemistry in boilers.
- Operate high-pressure steam boiler or water chiller equipment for electrical cogeneration operations.
- Operate equipment to heat biomass, using knowledge of controls, combustion, and firing mechanisms.
- Operate equipment to start, stop, or regulate biomass-fueled generators, generator units, boilers, engines, or auxiliary systems.
- Record or report operational data, such as readings on meters, instruments, and gauges.
- Operate valves, pumps, engines, or generators to control and adjust production of biofuels or biomass-fueled power.
- Calculate, measure, load, or mix biomass feedstock for power generation.
- Clean work areas to ensure compliance with safety regulations.
- Perform routine maintenance or make minor repairs to mechanical, electrical, or electronic equipment in biomass plants.
- Measure and monitor raw biomass feedstock, including wood, waste, or refuse materials.
- Calibrate liquid flow devices or meters, including fuel, chemical, and water meters.
- Assess quality of biomass feedstock.
- Read and interpret instruction manuals or technical drawings related to biomass-fueled power or biofuels production equipment or processes.
- Operate heavy equipment, such as bulldozers and front-end loaders.
- Preprocess feedstock to prepare for biochemical or thermochemical production processes.
- Manage parts and supply inventories for biomass plants.
- Inspect biomass power plant or processing equipment, recording or reporting damage and mechanical problems.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Notify supervisors of mechanical malfunctions.
- Inspect products to ensure that the quality standards and specifications are met.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Inspect machinery to determine whether repairs are needed.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Repair or replace worn or defective parts or components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Notify supervisors of mechanical malfunctions.
- Inspect biofuels plant or processing equipment regularly, recording or reporting damage and mechanical problems.
- Monitor batch, continuous flow, or hybrid biofuels production processes.
- Operate valves, pumps, engines, or generators to control and adjust biofuels production.
- Monitor and record biofuels processing data.
- Collect biofuels samples and perform routine laboratory tests or analyses to assess biofuels quality.
- Operate equipment, such as a centrifuge, to extract biofuels products and secondary by-products or reusable fractions.
- Process refined feedstock with additives in fermentation or reaction process vessels.
- Operate chemical processing equipment for the production of biofuels.
- Monitor and record flow meter performance.
- Measure and monitor raw biofuels feedstock.
- Preprocess feedstock in preparation for physical, chemical, or biological fuel production processes.
- Calculate, measure, load, or mix refined feedstock used in biofuels production.
- Monitor stored biofuels products or secondary by-products until reused or transferred to users.
- Assess the quality of biofuels additives for reprocessing.
- Clean biofuels processing work area, ensuring compliance with safety regulations.
- Perform routine maintenance on mechanical, electrical, or electronic equipment or instruments used in the processing of biofuels.
- Calibrate liquid flow devices and meters, including fuel, chemical, and water meters.
- Rebuild, repair, or replace biofuels processing equipment components.
- Coordinate raw product sourcing or collection.
- Inspect biofuels plant or processing equipment regularly, recording or reporting damage and mechanical problems.
- Notify maintenance, stationary engineering, or other auxiliary personnel to correct equipment malfunctions or to adjust power, steam, water, or air supplies.
- Monitor recording instruments, flowmeters, panel lights, or other indicators and listen for warning signals to verify conformity of process conditions.
- Regulate or shut down equipment during emergency situations, as directed by supervisory personnel.
- Control or operate chemical processes or systems of machines, using panelboards, control boards, or semi-automatic equipment.
- Move control settings to make necessary adjustments on equipment units affecting speeds of chemical reactions, quality, or yields.
- Inspect operating units, such as towers, soap-spray storage tanks, scrubbers, collectors, or driers to ensure that all are functioning and to maintain maximum efficiency.
- Draw samples of products and conduct quality control tests to monitor processing and to ensure that standards are met.
- Record operating data, such as process conditions, test results, or instrument readings.
- Patrol work areas to ensure that solutions in tanks or troughs are not in danger of overflowing.
- Turn valves to regulate flow of products or byproducts through agitator tanks, storage drums, or neutralizer tanks.
- Interpret chemical reactions visible through sight glasses or on television monitors and review laboratory test reports for process adjustments.
- Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality.
- Start pumps to wash and rinse reactor vessels, to exhaust gases or vapors, to regulate the flow of oil, steam, air, or perfume to towers, or to add products to converter or blending vessels.
- Repair or replace damaged equipment.
- Gauge tank levels, using calibrated rods.
- Calculate material requirements or yields according to formulas.
- Direct workers engaged in operating machinery that regulates the flow of materials and products.
- Supervise the cleaning of towers, strainers, or spray tips.
- Defrost frozen valves, using steam hoses.
- Notify maintenance, stationary engineering, or other auxiliary personnel to correct equipment malfunctions or to adjust power, steam, water, or air supplies.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Record temperatures, amounts of materials processed, or test results on report forms.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Assemble equipment, and attach pipes, fittings, or valves, using hand tools.
- Measure or weigh specified amounts of ingredients or materials, and load them into tanks, vats, hoppers, or other equipment.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Inspect and flush lines with solutions or steam, and spray equipment with sterilizing solutions.
- Load and position wrapping paper, sticks, bags, or cartons into dispensing machines.
- Sample and test product characteristics such as specific gravity, acidity, and sugar content, using hydrometers, pH meters, or refractometers.
- Start agitators to blend contents, or start beater, scraper, and expeller blades to mix contents with air and prevent sticking.
- Place or position containers into equipment, and remove containers after completion of cooling or freezing processes.
- Scrape, dislodge, or break excess frost, ice, or frozen product from equipment to prevent accumulation, using hands and hand tools.
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Stir material with spoons or paddles to mix ingredients or allow even cooling and prevent coagulation.
- Position molds on conveyors, and measure and adjust level of fill, using depth gauges.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Notify board attendants of table vacancies so that waiting patrons can play.
- Resolve customer complaints regarding problems, such as payout errors.
- Remove suspected cheaters, such as card counters or other players who may have systems that shift the odds of winning to their favor.
- Track supplies of money to tables and perform any required paperwork.
- Explain and interpret house rules, such as game rules or betting limits.
- Prepare work schedules and station arrangements and keep attendance records.
- Monitor staffing levels to ensure that games and tables are adequately staffed for each shift, arranging for staff rotations and breaks and locating substitute employees as necessary.
- Maintain familiarity with all games used at a facility, as well as strategies or tricks employed in those games.
- Train new workers or evaluate their performance.
- Market or promote the casino to bring in business.
- Interview and hire workers.
- Direct the distribution of complimentary hotel rooms, meals, or other discounts or free items given to players, based on their length of play and betting totals.
- Establish policies on issues, such as the type of gambling offered and the odds, the extension of credit, or the serving of food and beverages.
- Circulate among gaming tables to ensure that operations are conducted properly, that dealers follow house rules, or that players are not cheating.
- Set and maintain a bank and table limit for each game.
- Direct the compilation of summary sheets that show wager amounts and payoffs for races or events.
- Review operational expenses, budget estimates, betting accounts, or collection reports for accuracy.
- Record, collect, or pay off bets, issuing receipts as necessary.
- Monitor credit extended to players.
- Notify board attendants of table vacancies so that waiting patrons can play.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Record operating data, such as the results of surveillance tests.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Identify or direct implementation of appropriate decontamination procedures, based on equipment and the size, nature, and type of contamination.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
- Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
- Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
- Remove finished packaged items from machine and separate rejected items.
- Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
- Inspect and remove defective products and packaging material.
- Start machine by engaging controls.
- Tend or operate machine that packages product.
- Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
- Regulate machine flow, speed, or temperature.
- Adjust machine components and machine tension and pressure according to size or processing angle of product.
- Supply materials to spindles, conveyors, hoppers, or other feeding devices and unload packaged product.
- Stack finished packaged items, or wrap protective material around each item, and pack the items in cartons or containers.
- Package the product in the form in which it will be sent out, for example, filling bags with flour from a chute or spout.
- Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels.
- Count and record finished and rejected packaged items.
- Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.
- Secure finished packaged items by hand tying, sewing, gluing, stapling, or attaching fastener.
- Clean and remove damaged or otherwise inferior materials to prepare raw products for processing.
- Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
- Notify supervisors or repair staff of mechanical malfunctions.
- Observe woven cloth to detect weaving defects.
- Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
- Remove defects in cloth by cutting and pulling out filling.
- Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
- Inspect products to ensure that specifications are met and to determine if machines need adjustment.
- Start machines, monitor operations, and make adjustments as needed.
- Stop machines when specified amounts of product have been produced.
- Inspect machinery to determine whether repairs are needed.
- Confer with co-workers to obtain information about orders, processes, or problems.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Program electronic equipment.
- Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Record information about work completed and machine settings.
- Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Repair or replace worn or defective needles and other components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.
- Adjust machine heating mechanisms, tensions, and speeds to produce specified products.
- Wash and blend wool, yarn, or cloth.
- Notify supervisors or repair staff of mechanical malfunctions.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Notify supervisors of needed repairs.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Clean, adjust, and maintain equipment, using hand tools.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Read work orders to determine production specifications and information.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Record data from operations, testing, and production on specified forms.
- Load materials into machinery and equipment, using hand tools.
- Clean work areas.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Reject defective products and readjust equipment to eliminate problems.
- Inspect chains, belts, or scrolls for signs of wear.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Collect samples of materials or products for laboratory testing.
- Set mill gauges to specified fineness of grind.
- Mark bins as to types of mixtures stored.
- Turn valves to regulate the moisture contents of materials.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Break mixtures to size, using picks.
- Notify supervisors of needed repairs.
- Signal or instruct other workers to weigh, move, or check products.
- Document quantity, quality, type, weight, test result data, and value of materials or products to maintain shipping, receiving, and production records and files.
- Weigh or measure materials, equipment, or products to maintain relevant records, using volume meters, scales, rules, or calipers.
- Collect or prepare measurement, weight, or identification labels and attach them to products.
- Examine products or materials, parts, subassemblies, and packaging for damage, defects, or shortages, using specification sheets, gauges, and standards charts.
- Collect product samples and prepare them for laboratory analysis or testing.
- Maintain, monitor, and clean work areas, such as recycling collection sites, drop boxes, counters and windows, and areas around scale houses.
- Compare product labels, tags, or tickets, shipping manifests, purchase orders, and bills of lading to verify accuracy of shipment contents, quality specifications, or weights.
- Remove from stock products or loads not meeting quality standards, and notify supervisors or appropriate departments of discrepancies or shortages.
- Inspect products and examination records to determine the number of defects per worker and the reasons for examiners' rejections.
- Store samples of finished products in labeled cartons and record their location.
- Maintain financial records, such as accounts of daily collections and billings, and records of receipts issued.
- Inspect incoming loads of waste to identify contents and to screen for the presence of specific regulated or hazardous wastes.
- Count or estimate quantities of materials, parts, or products received or shipped.
- Communicate with customers and vendors to exchange information regarding products, materials, and services.
- Compute product totals and charges for shipments.
- Fill orders for products and samples, following order tickets, and forward or mail items.
- Operate scalehouse computers to obtain weight information about incoming shipments such as those from waste haulers.
- Sort products or materials into predetermined sequences or groupings for display, packing, shipping, or storage.
- Transport materials, products, or samples to processing, shipping, or storage areas, manually or using conveyors, pumps, or hand trucks.
- Prepare measurement tables and conversion charts, using standard formulas.
- Unload or unpack incoming shipments.
- Signal or instruct other workers to weigh, move, or check products.
- Notify maintenance engineers of equipment malfunctions.
- Observe safety precautions to prevent fires or explosions.
- Record operational data, such as temperatures, pressures, ingredients used, processing times, or test results.
- Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Draw samples of products at specified stages so that analyses can be performed.
- Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Test product samples for specific gravity, chemical characteristics, pH levels, concentrations, or viscosities, or send them to laboratories for testing.
- Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary.
- Open valves or start pumps, agitators, reactors, blowers, or automatic feed of materials.
- Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures.
- Implement appropriate industrial emergency response procedures.
- Measure, weigh, and mix chemical ingredients, according to specifications.
- Dump or scoop prescribed solid, granular, or powdered materials into equipment.
- Estimate materials required for production and manufacturing of products.
- Add treating or neutralizing agents to products, and pump products through filters or centrifuges to remove impurities or to precipitate products.
- Observe and compare colors and consistencies of products to instrument readings and to laboratory and standard test results.
- Direct activities of workers assisting in control or verification of processes or in unloading of materials.
- Drain equipment, and pump water or other solutions through to flush and clean tanks or equipment.
- Flush or clean equipment, using steam hoses or mechanical reamers.
- Make minor repairs, lubricate, and maintain equipment, using hand tools.
- Inventory supplies received and consumed.
- Notify maintenance engineers of equipment malfunctions.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Notify supervisors or mechanics of equipment malfunctions.
- Weigh ingredients, such as dye, to be mixed together for use in textile processing.
- Start and control machines and equipment to wash, bleach, dye, or otherwise process and finish fabric, yarn, thread, or other textile goods.
- Observe display screens, control panels, equipment, and cloth entering or exiting processes to determine if equipment is operating correctly.
- Monitor factors such as temperatures and dye flow rates to ensure that they are within specified ranges.
- Add dyes, water, detergents, or chemicals to tanks to dilute or strengthen solutions, according to established formulas and solution test results.
- Examine and feel products to identify defects and variations from coloring and other processing standards.
- Adjust equipment controls to maintain specified heat, tension, and speed.
- Soak specified textile products for designated times.
- Inspect machinery to determine necessary adjustments and repairs.
- Confer with coworkers to get information about order details, processing plans, or problems that occur.
- Sew ends of cloth together, by hand or using machines, to form endless lengths of cloth to facilitate processing.
- Ravel seams that connect cloth ends when processing is completed.
- Remove dyed articles from tanks and machines for drying and further processing.
- Study guides, charts, and specification sheets, and confer with supervisors to determine machine setup requirements.
- Prepare dyeing machines for production runs, and conduct test runs of machines to ensure their proper operation.
- Key in processing instructions to program electronic equipment.
- Test solutions used to process textile goods to detect variations from standards.
- Record production information such as fabric yardage processed, temperature readings, fabric tensions, and machine speeds.
- Thread ends of cloth or twine through specified sections of equipment prior to processing.
- Mount rolls of cloth on machines, using hoists, or place textile goods in machines or pieces of equipment.
- Install, level, and align components such as gears, chains, dies, cutters, and needles.
- Perform machine maintenance, such as cleaning and oiling equipment, and repair or replace worn or defective parts.
- Creel machines with bobbins or twine.
- Notify supervisors or mechanics of equipment malfunctions.
- Notify supervisors or mechanics of equipment malfunctions.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Start machines, monitor operation, and make adjustments as needed.
- Inspect machinery to determine whether repairs are needed.
- Record production data such as numbers and types of bobbins wound.
- Replace depleted supply packages with full packages.
- Stop machines when specified amount of products has been produced.
- Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
- Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
- Adjust machine settings such as speed or tension to produce products that meet specifications.
- Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Tend spinning frames that draw out and twist roving or sliver into yarn.
- Remove spindles from machines and bobbins from spindles.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
- Repair or replace worn or defective parts or components, using hand tools.
- Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Tend machines that wind wire onto bobbins, preparatory to formation of wire netting used in reinforcing sheet glass.
- Notify supervisors or mechanics of equipment malfunctions.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Record production and test data for each food product batch, such as the ingredients used, temperature, test results, and time cycle.
- Clean and sterilize vats and factory processing areas.
- Set up, operate, and tend equipment that cooks, mixes, blends, or processes ingredients in the manufacturing of food products, according to formulas or recipes.
- Mix or blend ingredients, according to recipes, using a paddle or an agitator, or by controlling vats that heat and mix ingredients.
- Follow recipes to produce food products of specified flavor, texture, clarity, bouquet, or color.
- Give directions to other workers who are assisting in the batchmaking process.
- Select and measure or weigh ingredients, using English or metric measures and balance scales.
- Press switches and turn knobs to start, adjust, and regulate equipment, such as beaters, extruders, discharge pipes, and salt pumps.
- Determine mixing sequences, based on knowledge of temperature effects and of the solubility of specific ingredients.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Turn valve controls to start equipment and to adjust operation to maintain product quality.
- Modify cooking and forming operations based on the results of sampling processes, adjusting time cycles and ingredients to achieve desired qualities, such as firmness or texture.
- Examine, feel, and taste product samples during production to evaluate quality, color, texture, flavor, and bouquet, and document the results.
- Test food product samples for moisture content, acidity level, specific gravity, or butter-fat content, and continue processing until desired levels are reached.
- Inspect vats after cleaning to ensure that fermentable residue has been removed.
- Fill processing or cooking containers, such as kettles, rotating cookers, pressure cookers, or vats, with ingredients, by opening valves, by starting pumps or injectors, or by hand.
- Manipulate products, by hand or using machines, to separate, spread, knead, spin, cast, cut, pull, or roll products.
- Cool food product batches on slabs or in water-cooled kettles.
- Place products on carts or conveyors to transfer them to the next stage of processing.
- Homogenize or pasteurize material to prevent separation or to obtain prescribed butterfat content, using a homogenizing device.
- Grade food products according to government regulations or according to type, color, bouquet, and moisture content.
- Operate refining machines to reduce the particle size of cooked batches.
- Formulate or modify recipes for specific kinds of food products.
- Inspect and pack the final product.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Notify supervisors when extruded filaments fail to meet standards.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Notify supervisors when extruded filaments fail to meet standards.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Hammer out bulges or bends in metal workpieces.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Notify supervisors or other personnel of production problems.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Recommend necessary corrective actions, based on inspection results.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Monitor machines that automatically measure, sort, or inspect products.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Inspect or test cleantech or green technology parts, products, or installations, such as fuel cells, solar panels, or air quality devices, for conformance to specifications or standards.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Compute defect percentages or averages, using formulas and calculators.
- Notify supervisors or other personnel of production problems.