- Read work orders to determine dimensions, cutting locations, and quantities to cut.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 1 | 1 | 1-2 | 51-2021.00 | Coil Winders, Tapers, and Finishers |
| 1 | 1 | 1-2 | 51-2092.00 | Team Assemblers
|
| 1 | 1 | 1-2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-9191.00 | Adhesive Bonding Machine Operators and Tenders |
| 1 | 1 | 1-2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers Bright Outlook
|
| 1 | 1 | 3 | 51-9082.00 | Medical Appliance Technicians |
| 1 | 1 | 3 | 51-4061.00 | Model Makers, Metal and Plastic |
| 1 | 1 | 1-2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-3093.00 | Food Cooking Machine Operators and Tenders |
| 1 | 1 | 1-2 | 51-9051.00 | Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders |
| 1 | 1 | 1-2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
| 1 | 1 | 1-2 | 51-8092.00 | Gas Plant Operators |
| 1 | 1 | 1-2 | 51-9083.00 | Ophthalmic Laboratory Technicians |
| 1 | 1 | 1-2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-6042.00 | Shoe Machine Operators and Tenders |
| 1 | 1 | 1-2 | 51-7011.00 | Cabinetmakers and Bench Carpenters |
| 1 | 1 | 1-2 | 51-9023.00 | Mixing and Blending Machine Setters, Operators, and Tenders |
| 1 | 1 | 1-2 | 51-9141.00 | Semiconductor Processing Technicians Bright Outlook
|
| 1 | 1 | 1-2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
| 1 | 1 | 1-2 | 51-9081.00 | Dental Laboratory Technicians |
| 1 | 1 | 1-2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-7021.00 | Furniture Finishers |
| 1 | 1 | 1-2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 1 | 1 | 1-2 | 51-6052.00 | Tailors, Dressmakers, and Custom Sewers |
| 1 | 1 | 1-2 | 51-6093.00 | Upholsterers |
| 1 | 1 | 1-2 | 51-5112.00 | Printing Press Operators |
| 1 | 1 | 1-2 | 51-9011.00 | Chemical Equipment Operators and Tenders |
| 1 | 1 | 1-2 | 51-9195.00 | Molders, Shapers, and Casters, Except Metal and Plastic Bright Outlook
|
| 1 | 1 | 1-2 | 51-2041.00 | Structural Metal Fabricators and Fitters |
| 1 | 1 | 1-2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 1 | 1 | 1-2 | 51-6041.00 | Shoe and Leather Workers and Repairers |
| 1 | 1 | 1-2 | 51-9151.00 | Photographic Process Workers and Processing Machine Operators |
| 1 | 1 | 1-2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
| 1 | 1 | 1-2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 1-2 | 51-9061.00 | Inspectors, Testers, Sorters, Samplers, and Weighers |
- Review work orders and specifications to determine materials needed and types of parts to be processed.
- Operate or tend wire-coiling machines to wind wire coils used in electrical components such as resistors and transformers, and in electrical equipment and instruments such as bobbins and generators.
- Attach, alter, and trim materials such as wire, insulation, and coils, using hand tools.
- Cut, strip, and bend wire leads at ends of coils, using pliers and wire scrapers.
- Select and load materials such as workpieces, objects, and machine parts onto equipment used in coiling processes.
- Record production and operational data on specified forms.
- Stop machines to remove completed components, using hand tools.
- Examine and test wired electrical components such as motors, armatures, and stators, using measuring devices, and record test results.
- Line slots with sheet insulation, and insert coils into slots.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Disassemble and assemble motors, and repair and maintain electrical components and machinery parts, using hand tools.
- Review work orders and specifications to determine materials needed and types of parts to be processed.
- Review work orders and blueprints to ensure work is performed according to specifications.
- Perform quality checks on products and parts.
- Rotate through all the tasks required in a particular production process.
- Determine work assignments and procedures.
- Supervise assemblers and train employees on job procedures.
- Shovel, sweep, or otherwise clean work areas.
- Provide assistance in the production of wiring assemblies.
- Maintain production equipment and machinery.
- Complete production reports to communicate team production level to management.
- Package finished products and prepare them for shipment.
- Operate machinery and heavy equipment, such as forklifts.
- Review work orders and blueprints to ensure work is performed according to specifications.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.
- Verify alignment of workpieces on machines, using measuring instruments such as rules, gauges, or calipers.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Observe milling or planing machine operation, and adjust controls to ensure conformance with specified tolerances.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Record production output.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Make templates or cutting tools.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Align and position materials being joined to ensure accurate application of adhesive or heat sealing.
- Adjust machine components according to specifications such as widths, lengths, and thickness of materials and amounts of glue, cement, or adhesive required.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Start machines, and turn valves or move controls to feed, admit, apply, or transfer materials and adhesives, and to adjust temperature, pressure, and time settings.
- Fill machines with glue, cement, or adhesives.
- Perform test production runs and make adjustments as necessary to ensure that completed products meet standards and specifications.
- Examine and measure completed materials or products to verify conformance to specifications, using measuring devices such as tape measures, gauges, or calipers.
- Remove and stack completed materials or products, and restock materials to be joined.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Maintain production records such as quantities, dimensions, and thicknesses of materials processed.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Mount or load material such as paper, plastic, wood, or rubber in feeding mechanisms of cementing or gluing machines.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Measure and mix ingredients to prepare glue.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Instruct customers in the installation, repair, or maintenance of products.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Order parts or supplies for orthotic or prosthetic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Study blueprints, drawings, and sketches to determine material dimensions, required equipment, and operations sequences.
- Set up and operate machines, such as lathes, drill presses, punch presses, or bandsaws, to fabricate prototypes or models.
- Program computer numerical control (CNC) machines to fabricate model parts.
- Inspect and test products to verify conformance to specifications, using precision measuring instruments or circuit testers.
- Cut, shape, and form metal parts, using lathes, power saws, snips, power brakes and shears, files, and mallets.
- Rework or alter component model or parts as required to ensure that products meet standards.
- Drill, countersink, and ream holes in parts and assemblies for bolts, screws, and other fasteners, using power tools.
- Grind, file, and sand parts to finished dimensions.
- Devise and construct tools, dies, molds, jigs, and fixtures, or modify existing tools and equipment.
- Record specifications, production operations, and final dimensions of models for use in establishing operating standards and procedures.
- Align, fit, and join parts, using bolts and screws or by welding or gluing.
- Lay out and mark reference points and dimensions on materials, using measuring instruments and drawing or scribing tools.
- Consult and confer with engineering personnel to discuss developmental problems and to recommend product modifications.
- Use computer-aided design (CAD) and computer-aided manufacturing (CAM) software or hardware to fabricate model parts.
- Assemble mechanical, electrical, and electronic components into models or prototypes, using hand tools, power tools, and fabricating machines.
- Wire and solder electrical and electronic connections and components.
- Study blueprints, drawings, and sketches to determine material dimensions, required equipment, and operations sequences.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Observe drilling or boring machine operations to detect any problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Read work orders, recipes, or formulas to determine cooking times and temperatures, and ingredient specifications.
- Clean, wash, and sterilize equipment and cooking area, using water hoses, cleaning or sterilizing solutions, or rinses.
- Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate temperature, pressure, and flow of ingredients.
- Measure or weigh ingredients, using scales or measuring containers.
- Tend or operate and control equipment, such as kettles, cookers, vats and tanks, and boilers, to cook ingredients or prepare products for further processing.
- Record production and test data, such as processing steps, temperature and steam readings, cooking time, batches processed, and test results.
- Set temperature, pressure, and time controls, and start conveyers, machines, or pumps.
- Remove cooked material or products from equipment.
- Collect and examine product samples during production to test them for quality, color, content, consistency, viscosity, acidity, or specific gravity.
- Pour, dump, or load prescribed quantities of ingredients or products into cooking equipment, manually or using a hoist.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Notify or signal other workers to operate equipment or when processing is complete.
- Turn valves or start pumps to add ingredients or drain products from equipment and to transfer products for storage, cooling, or further processing.
- Admit required amounts of water, steam, cooking oils, or compressed air into equipment, such as by opening water valves to cool mixtures to the desired consistency.
- Activate agitators and paddles to mix or stir ingredients, stopping machines when ingredients are thoroughly mixed.
- Operate auxiliary machines and equipment, such as grinders, canners, and molding presses, to prepare or further process products.
- Place products on conveyors or carts, and monitor product flow.
- Read work orders, recipes, or formulas to determine cooking times and temperatures, and ingredient specifications.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems.
- Press and adjust controls to activate, set, and regulate equipment according to specifications.
- Record gauge readings, test results, and shift production in log books.
- Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Load equipment receptacles or conveyors with material to be processed, by hand or using hoists.
- Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing.
- Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions.
- Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures.
- Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers.
- Direct crane operators and crew members to load vessels with materials to be processed.
- Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets.
- Replace worn or defective equipment parts, using hand tools.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Start lathe or turning machines and observe operations to ensure that specifications are met.
- Program computer numerical control machines.
- Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
- Clean work area.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Signal coworkers to synchronize flow of materials.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Read logsheets to determine product demand and disposition, or to detect malfunctions.
- Monitor equipment functioning, observe temperature, level, and flow gauges, and perform regular unit checks to ensure that all equipment is operating as it should.
- Distribute or process gas for utility companies or industrial plants, using panel boards, control boards, and semi-automatic equipment.
- Control operation of compressors, scrubbers, evaporators, and refrigeration equipment to liquefy, compress, or regasify natural gas.
- Control equipment to regulate flow and pressure of gas to feedlines of boilers, furnaces, and related steam-generating or heating equipment.
- Record, review, and compile operations records, test results, and gauge readings such as temperatures, pressures, concentrations, and flows.
- Determine causes of abnormal pressure variances, and make corrective recommendations, such as installation of pipes to relieve overloading.
- Adjust temperature, pressure, vacuum, level, flow rate, or transfer of gas to maintain processes at required levels or to correct problems.
- Collaborate with other operators to solve unit problems.
- Monitor transportation and storage of flammable and other potentially dangerous products to ensure that safety guidelines are followed.
- Start and shut down plant equipment.
- Contact maintenance crews when necessary.
- Test gas, chemicals, and air during processing to assess factors such as purity and moisture content, and to detect quality problems or gas or chemical leaks.
- Clean, maintain, and repair equipment, using hand tools, or request that repair and maintenance work be performed.
- Signal or direct workers who tend auxiliary equipment.
- Control fractioning columns, compressors, purifying towers, heat exchangers, and related equipment to extract nitrogen and oxygen from air.
- Calculate gas ratios to detect deviations from specifications, using testing apparatus.
- Operate construction equipment to install and maintain gas distribution systems.
- Change charts in recording meters.
- Read logsheets to determine product demand and disposition, or to detect malfunctions.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Inspect lens blanks to detect flaws, verify smoothness of surface, and ensure thickness of coating on lenses.
- Set up machines to polish, bevel, edge, or grind lenses, flats, blanks, or other precision optical elements.
- Inspect, weigh, and measure mounted or unmounted lenses after completion to verify alignment and conformance to specifications, using precision instruments.
- Shape lenses appropriately so that they can be inserted into frames.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Mount, secure, and align finished lenses in frames or optical assemblies, using precision hand tools.
- Adjust lenses and frames to correct alignment.
- Select lens blanks, molds, tools, and polishing or grinding wheels, according to production specifications.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Assemble eyeglass frames and attach shields, nose pads, and temple pieces, using pliers, screwdrivers, and drills.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Repair broken parts, using precision hand tools and soldering irons.
- Immerse eyeglass frames in solutions to harden, soften, or dye frames.
- Lay out lenses and trace lens outlines on glass, using templates.
- Control equipment that coats lenses to alter their reflective qualities.
- Remove lenses from molds and separate lenses in containers for further processing or storage.
- Tint lenses according to customer specifications.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Study work orders or shoe part tags to obtain information about workloads, specifications, and the types of materials to be used.
- Inspect finished products to ensure that shoes have been completed according to specifications.
- Align parts to be stitched, following seams, edges, or markings, before positioning them under needles.
- Operate or tend machines to join, decorate, reinforce, or finish shoes and shoe parts.
- Remove and examine shoes, shoe parts, and designs to verify conformance to specifications such as proper embedding of stitches in channels.
- Switch on machines, lower pressure feet or rollers to secure parts, and start machine stitching, using hand, foot, or knee controls.
- Draw thread through machine guide slots, needles, and presser feet in preparation for stitching, or load rolls of wire through machine axles.
- Perform routine equipment maintenance such as cleaning and lubricating machines or replacing broken needles.
- Test machinery to ensure proper functioning before beginning production.
- Select and place spools of thread or pre-wound bobbins into shuttles, or onto spindles or loupers of stitching machines.
- Cut excess thread or material from shoe parts, using scissors or knives.
- Turn knobs to adjust stitch length and thread tension.
- Fill shuttle spools with thread from a machine's bobbin winder by pressing a foot treadle.
- Staple sides of shoes, pressing a foot treadle to position and hold each shoe under the feeder of the machine.
- Position dies on material in a manner that will obtain the maximum number of parts from each portion of material.
- Collect shoe parts from conveyer belts or racks and place them in machinery such as ovens or on molds for dressing, returning them to conveyers or racks to send them to the next work station.
- Turn setscrews on needle bars, and position required numbers of needles in stitching machines.
- Hammer loose staples for proper attachment.
- Turn screws to regulate size of staples.
- Study work orders or shoe part tags to obtain information about workloads, specifications, and the types of materials to be used.
- Establish the specifications of articles to be constructed or repaired, or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Cut timber to the right size, and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Perform final touch-ups with sandpaper or steel wool.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Estimate the amounts, types, or costs of needed materials.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Draw up detailed specifications and discuss projects with customers.
- Design furniture, using computer-aided drawing programs.
- Apply Masonite, formica, or vinyl surfacing materials.
- Program computers to operate machinery.
- Establish the specifications of articles to be constructed or repaired, or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Read work orders to determine production specifications or information.
- Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Mix or blend ingredients by starting machines and mixing for specified times.
- Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
- Compound or process ingredients or dyes, according to formulas.
- Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
- Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.
- Dump or pour specified amounts of materials into machinery or equipment.
- Record operational or production data on specified forms.
- Collect samples of materials or products for laboratory testing.
- Unload mixtures into containers or onto conveyors for further processing.
- Clean work areas.
- Add or mix chemicals or ingredients for processing, using hand tools or other devices.
- Tend accessory equipment, such as pumps or conveyors, to move materials or ingredients through production processes.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Clean and maintain equipment, using hand tools.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Open valves to drain slurry from mixers into storage tanks.
- Read work orders to determine production specifications or information.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Read work orders to determine production specifications and information.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Clean, adjust, and maintain equipment, using hand tools.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Notify supervisors of needed repairs.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Record data from operations, testing, and production on specified forms.
- Reject defective products and readjust equipment to eliminate problems.
- Inspect chains, belts, or scrolls for signs of wear.
- Clean work areas.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Mark bins as to types of mixtures stored.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Collect samples of materials or products for laboratory testing.
- Load materials into machinery and equipment, using hand tools.
- Turn valves to regulate the moisture contents of materials.
- Set mill gauges to specified fineness of grind.
- Read work orders to determine production specifications and information.
- Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.
- Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.
- Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.
- Place tooth models on an apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.
- Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.
- Train or supervise other dental technicians or dental laboratory bench workers.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.
- Rebuild or replace linings, wire sections, or missing teeth to repair dentures.
- Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.
- Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.
- Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.
- Mold wax over denture setups to form the full contours of artificial gums.
- Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.
- Prepare wax bite blocks and impression trays for use.
- Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.
- Fill chipped or low spots in surfaces of devices, using acrylic resins.
- Meet with dentists or patients to discuss dental appliances.
- Order parts or materials needed to make dental appliances.
- Scan dental models to create digital files.
- Stain porcelain on dental appliances to match the color of patients' teeth.
- Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Follow blueprints to produce specific designs.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Remove excess solvent, using cloths soaked in paint thinner.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Wash surfaces to prepare them for finish application.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Follow blueprints to produce specific designs.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Examine tags on garments to determine alterations that are needed.
- Measure parts, such as sleeves or pant legs, and mark or pin-fold alteration lines.
- Remove stitches from garments to be altered, using rippers or razor blades.
- Sew garments, using needles and thread or sewing machines.
- Let out or take in seams in suits and other garments to improve fit.
- Measure customers, using tape measures, and record measurements.
- Fit and study garments on customers to determine required alterations.
- Trim excess material, using scissors.
- Assemble garment parts and join parts with basting stitches, using needles and thread or sewing machines.
- Make garment style changes, such as tapering pant legs, narrowing lapels, and adding or removing padding.
- Maintain garment drape and proportions as alterations are performed.
- Take up or let down hems to shorten or lengthen garment parts, such as sleeves.
- Repair or replace defective garment parts, such as pockets, zippers, snaps, buttons, and linings.
- Press garments, using hand irons or pressing machines.
- Fit, alter, repair, and make made-to-measure clothing, according to customers' and clothing manufacturers' specifications and fit, and applying principles of garment design, construction, and styling.
- Estimate how much a garment will cost to make, based on factors such as time and material requirements.
- Position patterns of garment parts on fabric, and cut fabric along outlines, using scissors.
- Record required alterations and instructions on tags, and attach them to garments.
- Confer with customers to determine types of material and garment styles desired.
- Develop, copy, or adapt designs for garments, and design patterns to fit measurements, applying knowledge of garment design, construction, styling, and fabric.
- Put in padding and shaping materials.
- Sew buttonholes and attach buttons to finish garments.
- Examine tags on garments to determine alterations that are needed.
- Read work orders, and apply knowledge and experience with materials to determine types and amounts of materials required to cover workpieces.
- Fit, install, and secure material on frames, using hand tools, power tools, glue, cement, or staples.
- Measure and cut new covering materials, using patterns and measuring and cutting instruments, following sketches and design specifications.
- Build furniture up with loose fiber stuffing, cotton, felt, or foam padding to form smooth, rounded surfaces.
- Make, restore, or create custom upholstered furniture, using hand tools and knowledge of fabrics and upholstery methods.
- Examine furniture frames, upholstery, springs, and webbing to locate defects.
- Adjust or replace webbing, padding, or springs, and secure them in place.
- Sew rips or tears in material, or create tufting, using needles and thread.
- Remove covering, webbing, padding, or defective springs from workpieces, using hand tools such as hammers and tack pullers.
- Attach fasteners, grommets, buttons, buckles, ornamental trim, and other accessories to covers or frames, using hand tools.
- Repair furniture frames and refinish exposed wood.
- Interweave and fasten strips of webbing to the backs and undersides of furniture, using small hand tools and fasteners.
- Draw cutting lines on material following patterns, templates, sketches, or blueprints, using chalk, pencils, paint, or other methods.
- Stretch webbing and fabric, using webbing stretchers.
- Operate sewing machines or sew upholstery by hand to seam cushions and join various sections of covering material.
- Design upholstery cover patterns and cutting plans, based on sketches, customer descriptions, or blueprints.
- Maintain records of time required to perform each job.
- Discuss upholstery fabrics, colors, and styles with customers, and provide cost estimates.
- Pick up and deliver furniture.
- Attach bindings or apply solutions to edges of cut material to prevent raveling.
- Collaborate with interior designers to decorate rooms and coordinate furnishing fabrics.
- Make, repair, or replace automobile upholstery and convertible and vinyl tops, using knowledge of fabric and upholstery methods.
- Read work orders, and apply knowledge and experience with materials to determine types and amounts of materials required to cover workpieces.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Start presses and pull proofs to check for ink coverage and density, alignment, and registration.
- Adjust ink fountain flow rates.
- Verify that paper and ink meet the specifications for a given job.
- Collect and inspect random samples during print runs to identify any necessary adjustments.
- Feed paper through press cylinders and adjust feed and tension controls.
- Monitor automated press operation systems and respond to fault, error, or alert messages.
- Load presses with paper and make necessary adjustments, according to paper size.
- Secure printing plates to printing units and adjust tolerances.
- Clean ink fountains, plates, or printing unit cylinders when press runs are completed.
- Change press plates, blankets, or cylinders, as required.
- Obtain or mix inks and fill ink fountains.
- Input production job settings into workstation terminals that control automated printing systems.
- Clean or oil presses or make minor repairs, using hand tools.
- Maintain time or production records.
- Monitor inventory levels on a regular basis, ordering or requesting additional supplies, as necessary.
- Monitor environmental factors, such as humidity and temperature, that may impact equipment performance and make necessary adjustments.
- Download or scan files to be printed, using printing production software.
- Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
- Direct or monitor work of press crews.
- Download completed jobs to archive media so that questions can be answered or jobs replicated.
- Control workflow scheduling or job tracking, using computer database software.
- Set up or operate auxiliary equipment, such as cutting, folding, plate-making, drilling, or laminating machines.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures.
- Observe safety precautions to prevent fires or explosions.
- Record operational data, such as temperatures, pressures, ingredients used, processing times, or test results.
- Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Draw samples of products at specified stages so that analyses can be performed.
- Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Test product samples for specific gravity, chemical characteristics, pH levels, concentrations, or viscosities, or send them to laboratories for testing.
- Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary.
- Open valves or start pumps, agitators, reactors, blowers, or automatic feed of materials.
- Implement appropriate industrial emergency response procedures.
- Measure, weigh, and mix chemical ingredients, according to specifications.
- Dump or scoop prescribed solid, granular, or powdered materials into equipment.
- Notify maintenance engineers of equipment malfunctions.
- Estimate materials required for production and manufacturing of products.
- Add treating or neutralizing agents to products, and pump products through filters or centrifuges to remove impurities or to precipitate products.
- Observe and compare colors and consistencies of products to instrument readings and to laboratory and standard test results.
- Direct activities of workers assisting in control or verification of processes or in unloading of materials.
- Drain equipment, and pump water or other solutions through to flush and clean tanks or equipment.
- Flush or clean equipment, using steam hoses or mechanical reamers.
- Make minor repairs, lubricate, and maintain equipment, using hand tools.
- Inventory supplies received and consumed.
- Load products into tanks for shipment.
- Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Trim or remove excess material, using scrapers, knives, or band saws.
- Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges.
- Clean, finish, and lubricate molds and mold parts.
- Separate models or patterns from molds and examine products for accuracy.
- Set the proper operating temperature for each casting.
- Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
- Align and assemble parts to produce completed products, using gauges and hand tools.
- Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds.
- Select sizes and types of molds according to instructions.
- Patch broken edges or fractures, using clay or plaster.
- Withdraw cores or other loose mold members after castings solidify.
- Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools.
- Measure and cut products to specified dimensions, using measuring and cutting instruments.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas.
- Remove excess materials and level and smooth wet mold mixtures.
- Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors.
- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
- Tap or tilt molds to ensure uniform distribution of materials.
- Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks.
- Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Study engineering drawings and blueprints to determine materials requirements and task sequences.
- Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Tack-weld fitted parts together.
- Move parts into position, manually or with hoists or cranes.
- Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Lift or move materials and finished products, using large cranes.
- Set up face blocks, jigs, and fixtures.
- Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
- Hammer, chip, and grind workpieces to cut, bend, and straighten metal.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
- Smooth workpiece edges and fix taps, tubes, and valves.
- Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone.
- Design and construct templates and fixtures, using hand tools.
- Direct welders to build up low spots or short pieces with weld.
- Heat-treat parts, using acetylene torches.
- Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers.
- Erect ladders and scaffolding to fit together large assemblies.
- Preheat workpieces to make them malleable, using hand torches or furnaces.
- Install boilers, containers, and other structures.
- Troubleshoot and repair electrical or mechanical equipment.
- Study engineering drawings and blueprints to determine materials requirements and task sequences.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Read prescriptions or specifications, and take measurements to establish the type of product to be made, using calipers, tape measures, or rules.
- Dye, soak, polish, paint, stamp, stitch, stain, buff, or engrave leather or other materials to obtain desired effects, decorations, or shapes.
- Cut out parts, following patterns or outlines, using knives, shears, scissors, or machine presses.
- Construct, decorate, or repair leather products according to specifications, using sewing machines, needles and thread, leather lacing, glue, clamps, hand tools, or rivets.
- Repair and recondition leather products such as trunks, luggage, shoes, saddles, belts, purses, and baseball gloves.
- Align and stitch or glue materials such as fabric, fleece, leather, or wood, to join parts.
- Inspect articles for defects, and remove damaged or worn parts, using hand tools.
- Drill or punch holes and insert or attach metal rings, handles, and fastening hardware, such as buckles.
- Prepare inserts, heel pads, and lifts from casts of customers' feet.
- Dress and otherwise finish boots or shoes, as by trimming the edges of new soles and heels to the shoe shape.
- Attach insoles to shoe lasts, affix shoe uppers, and apply heels and outsoles.
- Clean and polish shoes.
- Cement, nail, or sew soles and heels to shoes.
- Check the texture, color, and strength of leather to ensure that it is adequate for a particular purpose.
- Shape shoe heels with a knife, and sand them on a buffing wheel for smoothness.
- Place shoes on lasts to remove soles and heels, using knives or pliers.
- Repair or replace soles, heels, and other parts of footwear, using sewing, buffing and other shoe repair machines, materials, and equipment.
- Cut, insert, position, and secure paddings, cushioning, or linings, using stitches or glue.
- Estimate the costs of requested products or services such as custom footwear or footwear repair, and receive payment from customers.
- Draw patterns, using measurements, designs, plaster casts, or customer specifications, and position or outline patterns on work pieces.
- Nail heel and toe cleats onto shoes.
- Re-sew seams, and replace handles and linings of suitcases or handbags.
- Stretch shoes, dampening parts and inserting and twisting parts, using an adjustable stretcher.
- Attach accessories or ornamentation to decorate or protect products.
- Make, modify, and repair orthopedic or therapeutic footwear according to doctors' prescriptions, or modify existing footwear for people with foot problems and special needs.
- Select materials and patterns, and trace patterns onto materials to be cut out.
- Read prescriptions or specifications, and take measurements to establish the type of product to be made, using calipers, tape measures, or rules.
- Read work orders to determine required processes, techniques, materials, or equipment.
- Select digital images for printing, specify number of images to be printed, and direct to printer, using computer software.
- Create prints according to customer specifications and laboratory protocols.
- Produce color or black-and-white photographs, negatives, or slides, applying standard photographic reproduction techniques and procedures.
- Set or adjust machine controls, according to specifications, type of operation, or material requirements.
- Review computer-processed digital images for quality.
- Operate scanners or related computer equipment to digitize negatives, photographic prints, or other images.
- Fill tanks of processing machines with solutions such as developer, dyes, stop-baths, fixers, bleaches, or washes.
- Measure and mix chemicals to prepare solutions for processing, according to formulas.
- Load digital images onto computers directly from cameras or from storage devices, such as flash memory cards or universal serial bus (USB) devices.
- Operate special equipment to perform tasks such as transferring film to videotape or producing photographic enlargements.
- Examine developed prints for defects, such as broken lines, spots, or blurs.
- Load circuit boards, racks or rolls of film, negatives, or printing paper into processing or printing machines.
- Insert processed negatives and prints into envelopes for delivery to customers.
- Reprint originals for enlargement or in sections to be pieced together.
- Clean or maintain photoprocessing or darkroom equipment, using ultrasonic equipment or cleaning and rinsing solutions.
- Monitor equipment operation to detect malfunctions.
- Maintain records, such as quantities or types of processing completed, materials used, or customer charges.
- Immerse film, negatives, paper, or prints in developing solutions, fixing solutions, and water to complete photographic development processes.
- Examine quality of film fades or dissolves for potential color corrections, using color analyzers.
- Thread filmstrips through densitometers or sensitometers and expose film to light to determine density of film, necessary color corrections, or light sensitivity.
- Examine drawings, negatives, or photographic prints to determine coloring, shading, accenting, or other changes required for retouching or restoration.
- Place sensitized paper in frames of projection printers, photostats, or other reproduction machines.
- Upload digital images onto Web sites for customers.
- Produce timed prints with separate densities or color settings for each scene of a production.
- Splice broken or separated film and mount film on reels.
- Retouch photographic negatives or original prints to correct defects.
- Adjust digital images using software.
- Read work orders to determine required processes, techniques, materials, or equipment.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Give directions to other workers regarding machine set-up and use.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Remove completed workpieces or parts from machinery, using hand tools.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Transfer components, metal products, or assemblies, using moving equipment.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Tend auxiliary equipment used in welding processes.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Anneal finished workpieces to relieve internal stress.
- Load or feed workpieces into welding machines to join or bond components.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Start machines, monitor their operations, and record operational data.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Load workpieces, plastic material, or chemical solutions into machines.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Clean work area.
- Lubricate workpieces with oil.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Clean and lubricate machines.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Replace defective blades or wheels, using hand tools.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Mark identifying data on workpieces.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Hone cutters with oilstones to remove nicks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Operate forklifts to deliver materials.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Use equipment designed to join sheet metal, such as spot welders.
- Preheat workpieces, using heating furnaces or hand torches.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Notify supervisors or other personnel of production problems.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Recommend necessary corrective actions, based on inspection results.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Monitor machines that automatically measure, sort, or inspect products.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Compute defect percentages or averages, using formulas and calculators.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
