- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 4 | 6 | 1-2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 4 | 5 | 1-2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
| 4 | 4 | 1-2 | 51-9161.00 | Computer Numerically Controlled Tool Operators |
| 3 | 6 | 1-2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
| 3 | 5 | 1-2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 5 | 1-2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 5 | 1-2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 4 | 1-2 | 51-4022.00 | Forging Machine Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 4 | 1-2 | 51-4021.00 | Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 3 | 3 | 51-4041.00 | Machinists |
| 2 | 7 | 1-2 | 51-6031.00 | Sewing Machine Operators |
| 2 | 5 | 1-2 | 51-6042.00 | Shoe Machine Operators and Tenders |
| 2 | 4 | 1-2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 4 | 1-2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 2 | 4 | 1-2 | 51-4191.00 | Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 4 | 1-2 | 51-6064.00 | Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders |
| 2 | 3 | 1-2 | 51-9196.00 | Paper Goods Machine Setters, Operators, and Tenders |
| 2 | 3 | 1-2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 3 | 1-2 | 51-6062.00 | Textile Cutting Machine Setters, Operators, and Tenders |
| 2 | 3 | 1-2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
| 2 | 3 | 1-2 | 51-6063.00 | Textile Knitting and Weaving Machine Setters, Operators, and Tenders |
| 2 | 3 | 1-2 | 51-9194.00 | Etchers and Engravers |
| 2 | 3 | 1-2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 2 | 2 | 1-2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
| 2 | 2 | 1-2 | 51-9198.00 | Helpers--Production Workers |
| 1 | 3 | 1-2 | 51-9031.00 | Cutters and Trimmers, Hand |
| 1 | 3 | 1-2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
| 1 | 3 | 1-2 | 51-6061.00 | Textile Bleaching and Dyeing Machine Operators and Tenders |
| 1 | 3 | 1-2 | 51-5113.00 | Print Binding and Finishing Workers |
| 1 | 3 | 1-2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 1-2 | 51-9195.04 | Glass Blowers, Molders, Benders, and Finishers 
|
| 1 | 2 | 1-2 | 51-8091.00 | Chemical Plant and System Operators |
| 1 | 2 | 1-2 | 51-9083.00 | Ophthalmic Laboratory Technicians |
| 1 | 2 | 1-2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 1-2 | 51-9197.00 | Tire Builders |
| 1 | 2 | 1-2 | 51-2041.00 | Structural Metal Fabricators and Fitters |
| 1 | 2 | 1-2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
| 1 | 2 | 1-2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
| 1 | 2 | 1-2 | 51-8013.00 | Power Plant Operators |
| 1 | 1 | 1-2 | 51-2031.00 | Engine and Other Machine Assemblers |
| 1 | 1 | 1-2 | 51-4052.00 | Pourers and Casters, Metal |
| 1 | 1 | 1-2 | 51-9051.00 | Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders |
| 1 | 1 | 1-2 | 51-9193.00 | Cooling and Freezing Equipment Operators and Tenders
|
| 1 | 1 | 1-2 | 51-8099.01 | Biofuels Processing Technicians |
| 1 | 1 | 5 | 25-1054.00 | Physics Teachers, Postsecondary |
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
- Start lathe or turning machines and observe operations to ensure that specifications are met.
- Program computer numerical control machines.
- Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
- Clean work area.
- Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Remove and replace dull cutting tools.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Implement changes to machine programs, and enter new specifications, using computers.
- Calculate machine speed and feed ratios and the size and position of cuts.
- Transfer commands from servers to computer numerical control (CNC) modules, using computer network links.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Insert control instructions into machine control units to start operation.
- Modify cutting programs to account for problems encountered during operation, and save modified programs.
- Write simple programs for computer-controlled machine tools.
- Lift workpieces to machines manually or with hoists or cranes.
- Input initial part dimensions into machine control panels.
- Set up future jobs while machines are operating.
- Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
- Stack or load finished items, or place items on conveyor systems.
- Control coolant systems.
- Clean machines, tooling, or parts, using solvents or solutions and rags.
- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
- Lay out and mark areas of parts to be shot peened and fill hoppers with shot.
- Examine electronic components for defects or completeness of laser-beam trimming, using microscopes.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Remove and replace dull cutting tools.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
- Clean or maintain products, machines, or work areas.
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
- Grease or oil woodworking machines.
- Unclamp workpieces and remove them from machines.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
- Control hoists to remove parts or products from work stations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.
- Verify alignment of workpieces on machines, using measuring instruments such as rules, gauges, or calipers.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Observe milling or planing machine operation, and adjust controls to ensure conformance with specified tolerances.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Record production output.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Make templates or cutting tools.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Replace defective blades or wheels, using hand tools.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Start machines, monitor their operations, and record operational data.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Load workpieces, plastic material, or chemical solutions into machines.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Clean work area.
- Lubricate workpieces with oil.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Clean and lubricate machines.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Mark identifying data on workpieces.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Hone cutters with oilstones to remove nicks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Operate forklifts to deliver materials.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Use equipment designed to join sheet metal, such as spot welders.
- Preheat workpieces, using heating furnaces or hand torches.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Replace defective blades or wheels, using hand tools.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.
- Repair, maintain, and replace parts on dies.
- Select, align, and bolt positioning fixtures, stops, and specified dies to rams and anvils, forging rolls, or presses and hammers.
- Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.
- Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.
- Measure and inspect machined parts to ensure conformance to product specifications.
- Set up, operate, or tend presses and forging machines to perform hot or cold forging by flattening, straightening, bending, cutting, piercing, or other operations to taper, shape, or form metal.
- Turn handles or knobs to set pressures and depths of ram strokes and to synchronize machine operations.
- Start machines to produce sample workpieces, and observe operations to detect machine malfunctions and to verify that machine setups conform to specifications.
- Confer with other workers about machine setups and operational specifications.
- Trim and compress finished forgings to specified tolerances.
- Remove dies from machines when production runs are finished.
- Sharpen cutting tools and drill bits, using bench grinders.
- Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.
- Repair, maintain, and replace parts on dies.
- Select, align, and bolt positioning fixtures, stops, and specified dies to rams and anvils, forging rolls, or presses and hammers.
- Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.
- Install dies, machine screws, and sizing rings on machines that extrude thermoplastic or metal materials.
- Change dies on extruding machines, according to production line changes.
- Replace worn dies when products vary from specifications.
- Troubleshoot, maintain, and make minor repairs to equipment.
- Measure and examine extruded products to locate defects and to check for conformance to specifications, adjusting controls as necessary to alter products.
- Determine setup procedures and select machine dies and parts, according to specifications.
- Start machines and set controls to regulate vacuum, air pressure, sizing rings, and temperature, and to synchronize speed of extrusion.
- Reel extruded products into rolls of specified lengths and weights.
- Clean work areas.
- Weigh and mix pelletized, granular, or powdered thermoplastic materials and coloring pigments.
- Test physical properties of products with testing devices such as acid-bath testers, burst testers, and impact testers.
- Load machine hoppers with mixed materials, using augers, or stuff rolls of plastic dough into machine cylinders.
- Maintain an inventory of materials.
- Adjust controls to draw or press metal into specified shapes and diameters.
- Select nozzles, spacers, and wire guides, according to diameters and lengths of rods.
- Operate shearing mechanisms to cut rods to specified lengths.
- Install dies, machine screws, and sizing rings on machines that extrude thermoplastic or metal materials.
- Change dies on extruding machines, according to production line changes.
- Replace worn dies when products vary from specifications.
- Troubleshoot, maintain, and make minor repairs to equipment.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Monitor the feed and speed of machines during the machining process.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Operate equipment to verify operational efficiency.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics.
- Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Prepare working sketches for the illustration of product appearance.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Advise clients about the materials being used for finished products.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Perform equipment maintenance tasks such as replacing needles, sanding rough areas of needles, or cleaning and oiling sewing machines.
- Mount attachments, such as needles, cutting blades, or pattern plates, and adjust machine guides according to specifications.
- Place spools of thread, cord, or other materials on spindles, insert bobbins, and thread ends through machine guides and components.
- Position items under needles, using marks on machines, clamps, templates, or cloth as guides.
- Guide garments or garment parts under machine needles and presser feet to sew parts together.
- Fold or stretch edges or lengths of items while sewing to facilitate forming specified sections.
- Position material or articles in clamps, templates, or hoop frames prior to automatic operation of machines.
- Monitor machine operation to detect problems such as defective stitching, breaks in thread, or machine malfunctions.
- Remove holding devices and finished items from machines.
- Match cloth pieces in correct sequences prior to sewing them, and verify that dye lots and patterns match.
- Cut excess material or thread from finished products.
- Select supplies such as fasteners and thread, according to job requirements.
- Examine and measure finished articles to verify conformance to standards, using rulers.
- Start and operate or tend machines, such as single or double needle serging and flat-bed felling machines, to automatically join, reinforce, or decorate material or articles.
- Record quantities of materials processed.
- Turn knobs, screws, and dials to adjust settings of machines, according to garment styles and equipment performance.
- Attach tape, trim, appliques, or elastic to specified garments or garment parts, according to item specifications.
- Repair or alter items by adding replacement parts or missing stitches.
- Cut materials according to specifications, using blades, scissors, or electric knives.
- Inspect garments, and examine repair tags and markings on garments to locate defects or damage, and mark errors as necessary.
- Attach buttons, hooks, zippers, fasteners, or other accessories to fabric, using feeding hoppers or clamp holders.
- Draw markings or pin appliques on fabric to obtain variations in design.
- Tape or twist together thread or cord to repair breaks.
- Baste edges of material to align and temporarily secure parts for final assembly.
- Position and mark patterns on materials to prepare for sewing.
- Perform specialized or automatic sewing machine functions, such as buttonhole making or tacking.
- Perform equipment maintenance tasks such as replacing needles, sanding rough areas of needles, or cleaning and oiling sewing machines.
- Mount attachments, such as needles, cutting blades, or pattern plates, and adjust machine guides according to specifications.
- Place spools of thread, cord, or other materials on spindles, insert bobbins, and thread ends through machine guides and components.
- Position items under needles, using marks on machines, clamps, templates, or cloth as guides.
- Guide garments or garment parts under machine needles and presser feet to sew parts together.
- Fold or stretch edges or lengths of items while sewing to facilitate forming specified sections.
- Position material or articles in clamps, templates, or hoop frames prior to automatic operation of machines.
- Perform routine equipment maintenance such as cleaning and lubricating machines or replacing broken needles.
- Position dies on material in a manner that will obtain the maximum number of parts from each portion of material.
- Draw thread through machine guide slots, needles, and presser feet in preparation for stitching, or load rolls of wire through machine axles.
- Select and place spools of thread or pre-wound bobbins into shuttles, or onto spindles or loupers of stitching machines.
- Collect shoe parts from conveyer belts or racks and place them in machinery such as ovens or on molds for dressing, returning them to conveyers or racks to send them to the next work station.
- Inspect finished products to ensure that shoes have been completed according to specifications.
- Align parts to be stitched, following seams, edges, or markings, before positioning them under needles.
- Operate or tend machines to join, decorate, reinforce, or finish shoes and shoe parts.
- Remove and examine shoes, shoe parts, and designs to verify conformance to specifications such as proper embedding of stitches in channels.
- Switch on machines, lower pressure feet or rollers to secure parts, and start machine stitching, using hand, foot, or knee controls.
- Study work orders or shoe part tags to obtain information about workloads, specifications, and the types of materials to be used.
- Test machinery to ensure proper functioning before beginning production.
- Cut excess thread or material from shoe parts, using scissors or knives.
- Turn knobs to adjust stitch length and thread tension.
- Fill shuttle spools with thread from a machine's bobbin winder by pressing a foot treadle.
- Staple sides of shoes, pressing a foot treadle to position and hold each shoe under the feeder of the machine.
- Turn setscrews on needle bars, and position required numbers of needles in stitching machines.
- Hammer loose staples for proper attachment.
- Turn screws to regulate size of staples.
- Perform routine equipment maintenance such as cleaning and lubricating machines or replacing broken needles.
- Position dies on material in a manner that will obtain the maximum number of parts from each portion of material.
- Draw thread through machine guide slots, needles, and presser feet in preparation for stitching, or load rolls of wire through machine axles.
- Select and place spools of thread or pre-wound bobbins into shuttles, or onto spindles or loupers of stitching machines.
- Collect shoe parts from conveyer belts or racks and place them in machinery such as ovens or on molds for dressing, returning them to conveyers or racks to send them to the next work station.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Thread and hand-feed materials through machine cutters or abraders.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Thread and hand-feed materials through machine cutters or abraders.
- Mount and bolt sawing blades or attachments to machine shafts.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Mount and bolt sawing blades or attachments to machine shafts.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Mount fixtures and industrial coils on machines, using hand tools.
- Repair, replace, and maintain furnace equipment as needed, using hand tools.
- Mount workpieces in fixtures, on arbors, or between centers of machines.
- Position stock in furnaces, using tongs, chain hoists, or pry bars.
- Read production schedules and work orders to determine processing sequences, furnace temperatures, and heat cycle requirements for objects to be heat-treated.
- Record times that parts are removed from furnaces to document that objects have attained specified temperatures for specified times.
- Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges of furnaces, and color of stock in furnaces to make setting determinations.
- Start conveyors and open furnace doors to load stock, or signal crane operators to uncover soaking pits and lower ingots into them.
- Set up and operate or tend machines, such as furnaces, baths, flame-hardening machines, and electronic induction machines, that harden, anneal, and heat-treat metal.
- Remove parts from furnaces after specified times, and air dry or cool parts in water, oil brine, or other baths.
- Move controls to light gas burners and to adjust gas and water flow and flame temperature.
- Instruct new workers in machine operation.
- Determine flame temperatures, current frequencies, heating cycles, and induction heating coils needed, based on degree of hardness required and properties of stock to be treated.
- Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment, and metals.
- Examine parts to ensure metal shades and colors conform to specifications, using knowledge of metal heat-treating.
- Set and adjust speeds of reels and conveyors for prescribed time cycles to pass parts through continuous furnaces.
- Load parts into containers and place containers on conveyors to be inserted into furnaces, or insert parts into furnaces.
- Test parts for hardness, using hardness testing equipment, or by examining and feeling samples.
- Signal forklift operators to deposit or extract containers of parts into and from furnaces and quenching rinse tanks.
- Reduce heat when processing is complete to allow parts to cool in furnaces or machinery.
- Heat billets, bars, plates, rods, and other stock to specified temperatures preparatory to forging, rolling, or processing, using oil, gas, or electrical furnaces.
- Clean oxides and scales from parts or fittings, using steam sprays or chemical and water baths.
- Stamp heat-treatment identification marks on parts, using hammers and punches.
- Mount fixtures and industrial coils on machines, using hand tools.
- Repair, replace, and maintain furnace equipment as needed, using hand tools.
- Mount workpieces in fixtures, on arbors, or between centers of machines.
- Position stock in furnaces, using tongs, chain hoists, or pry bars.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Repair or replace worn or defective parts or components, using hand tools.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Notify supervisors or mechanics of equipment malfunctions.
- Start machines, monitor operation, and make adjustments as needed.
- Inspect machinery to determine whether repairs are needed.
- Record production data such as numbers and types of bobbins wound.
- Replace depleted supply packages with full packages.
- Stop machines when specified amount of products has been produced.
- Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
- Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
- Adjust machine settings such as speed or tension to produce products that meet specifications.
- Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Tend spinning frames that draw out and twist roving or sliver into yarn.
- Remove spindles from machines and bobbins from spindles.
- Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
- Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Repair or replace worn or defective parts or components, using hand tools.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Install attachments to machines for gluing, folding, printing, or cutting.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Place rolls of paper or cardboard on machine feed tracks, and thread paper through gluing, coating, and slitting rollers.
- Examine completed work to detect defects and verify conformance to work orders, and adjust machinery as necessary to correct production problems.
- Observe operation of various machines to detect and correct machine malfunctions such as improper forming, glue flow, or pasteboard tension.
- Start machines and move controls to regulate tension on pressure rolls, to synchronize speed of machine components, and to adjust temperatures of glue or paraffin.
- Disassemble machines to maintain, repair, or replace broken or worn parts, using hand or power tools.
- Cut products to specified dimensions, using hand or power cutters.
- Monitor finished cartons as they drop from forming machines into rotating hoppers and into gravity feed chutes to prevent jamming.
- Adjust guide assemblies, forming bars, and folding mechanisms according to specifications, using hand tools.
- Fill glue and paraffin reservoirs, and position rollers to dispense glue onto paperboard.
- Stamp products with information such as dates, using hand stamps or automatic stamping devices.
- Remove finished cores, and stack or place them on conveyors for transfer to other work areas.
- Lift tote boxes of finished cartons, and dump cartons into feed hoppers.
- Install attachments to machines for gluing, folding, printing, or cutting.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Place rolls of paper or cardboard on machine feed tracks, and thread paper through gluing, coating, and slitting rollers.
- Change worn cutting tools, using wrenches.
- Install tools in spindles.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Observe drilling or boring machine operations to detect any problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Change worn cutting tools, using wrenches.
- Install tools in spindles.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Repair or replace worn or defective parts or components, using hand tools.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Inspect products to ensure that the quality standards and specifications are met.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Notify supervisors of mechanical malfunctions.
- Inspect machinery to determine whether repairs are needed.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Repair or replace worn or defective parts or components, using hand tools.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Remove and replace worn or broken machine parts, using hand tools.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- Dress grinding wheels, according to specifications.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Remove and replace worn or broken machine parts, using hand tools.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Repair or replace worn or defective needles and other components, using hand tools.
- Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
- Observe woven cloth to detect weaving defects.
- Remove defects in cloth by cutting and pulling out filling.
- Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
- Inspect products to ensure that specifications are met and to determine if machines need adjustment.
- Notify supervisors or repair staff of mechanical malfunctions.
- Start machines, monitor operations, and make adjustments as needed.
- Stop machines when specified amounts of product have been produced.
- Inspect machinery to determine whether repairs are needed.
- Confer with co-workers to obtain information about orders, processes, or problems.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Program electronic equipment.
- Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.
- Record information about work completed and machine settings.
- Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.
- Adjust machine heating mechanisms, tensions, and speeds to produce specified products.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Repair or replace worn or defective needles and other components, using hand tools.
- Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
- Start machines and lower cutting tools to beginning points on patterns.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Start machines and lower cutting tools to beginning points on patterns.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Feed products into machines by hand or conveyor.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Measure arbors and dies to verify sizes specified on work tickets.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Feed products into machines by hand or conveyor.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Install accessories in swaging machines, using hand tools.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Install accessories in swaging machines, using hand tools.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Position spouts or chutes of storage bins so that containers can be filled.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Wash work areas, machines, equipment, vehicles, or products.
- Break up defective products for reprocessing.
- Cut or break flashing from materials or products.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Position spouts or chutes of storage bins so that containers can be filled.
- Replace or sharpen dulled cutting tools such as saws.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Fold or shape materials before or after cutting them.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Replace or sharpen dulled cutting tools such as saws.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Fold or shape materials before or after cutting them.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Signal coworkers to synchronize flow of materials.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install, level, and align components such as gears, chains, dies, cutters, and needles.
- Thread ends of cloth or twine through specified sections of equipment prior to processing.
- Perform machine maintenance, such as cleaning and oiling equipment, and repair or replace worn or defective parts.
- Weigh ingredients, such as dye, to be mixed together for use in textile processing.
- Start and control machines and equipment to wash, bleach, dye, or otherwise process and finish fabric, yarn, thread, or other textile goods.
- Observe display screens, control panels, equipment, and cloth entering or exiting processes to determine if equipment is operating correctly.
- Notify supervisors or mechanics of equipment malfunctions.
- Monitor factors such as temperatures and dye flow rates to ensure that they are within specified ranges.
- Add dyes, water, detergents, or chemicals to tanks to dilute or strengthen solutions, according to established formulas and solution test results.
- Examine and feel products to identify defects and variations from coloring and other processing standards.
- Adjust equipment controls to maintain specified heat, tension, and speed.
- Soak specified textile products for designated times.
- Inspect machinery to determine necessary adjustments and repairs.
- Confer with coworkers to get information about order details, processing plans, or problems that occur.
- Sew ends of cloth together, by hand or using machines, to form endless lengths of cloth to facilitate processing.
- Ravel seams that connect cloth ends when processing is completed.
- Remove dyed articles from tanks and machines for drying and further processing.
- Study guides, charts, and specification sheets, and confer with supervisors to determine machine setup requirements.
- Prepare dyeing machines for production runs, and conduct test runs of machines to ensure their proper operation.
- Key in processing instructions to program electronic equipment.
- Test solutions used to process textile goods to detect variations from standards.
- Record production information such as fabric yardage processed, temperature readings, fabric tensions, and machine speeds.
- Mount rolls of cloth on machines, using hoists, or place textile goods in machines or pieces of equipment.
- Install, level, and align components such as gears, chains, dies, cutters, and needles.
- Thread ends of cloth or twine through specified sections of equipment prior to processing.
- Perform machine maintenance, such as cleaning and oiling equipment, and repair or replace worn or defective parts.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Maintain records, such as daily production records, using specified forms.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Replace worn parts and adjust equipment components, using hand tools.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean and maintain equipment, using water hoses and scrapers.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Preheat workpieces in ovens.
- Replace worn parts and adjust equipment components, using hand tools.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Repair broken scrolls by replacing them with new sections of tubing.
- Place rubber hoses on ends of tubing and charge tubing with gas.
- Heat glass to pliable stage, using gas flames or ovens and rotating glass to heat it uniformly.
- Inspect, weigh, and measure products to verify conformance to specifications, using instruments such as micrometers, calipers, magnifiers, or rulers.
- Record manufacturing information, such as quantities, sizes, or types of goods produced.
- Place glass into dies or molds of presses and control presses to form products, such as glassware components or optical blanks.
- Spray or swab molds with oil solutions to prevent adhesion of glass.
- Blow tubing into specified shapes to prevent glass from collapsing, using compressed air or own breath, or blow and rotate gathers in molds or on boards to obtain final shapes.
- Determine types and quantities of glass required to fabricate products.
- Set up and adjust machine press stroke lengths and pressures and regulate oven temperatures, according to glass types to be processed.
- Shape, bend, or join sections of glass, using paddles, pressing and flattening hand tools, or cork.
- Design and create glass objects, using blowpipes and artisans' hand tools and equipment.
- Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash, or polish glass or glass products.
- Develop sketches of glass products into blueprint specifications, applying knowledge of glass technology and glass blowing.
- Superimpose bent tubing on asbestos patterns to ensure accuracy.
- Cut lengths of tubing to specified sizes, using files or cutting wheels.
- Repair broken scrolls by replacing them with new sections of tubing.
- Place rubber hoses on ends of tubing and charge tubing with gas.
- Repair or replace damaged equipment.
- Defrost frozen valves, using steam hoses.
- Monitor recording instruments, flowmeters, panel lights, or other indicators and listen for warning signals to verify conformity of process conditions.
- Regulate or shut down equipment during emergency situations, as directed by supervisory personnel.
- Control or operate chemical processes or systems of machines, using panelboards, control boards, or semi-automatic equipment.
- Move control settings to make necessary adjustments on equipment units affecting speeds of chemical reactions, quality, or yields.
- Inspect operating units, such as towers, soap-spray storage tanks, scrubbers, collectors, or driers to ensure that all are functioning and to maintain maximum efficiency.
- Draw samples of products and conduct quality control tests to monitor processing and to ensure that standards are met.
- Record operating data, such as process conditions, test results, or instrument readings.
- Patrol work areas to ensure that solutions in tanks or troughs are not in danger of overflowing.
- Turn valves to regulate flow of products or byproducts through agitator tanks, storage drums, or neutralizer tanks.
- Interpret chemical reactions visible through sight glasses or on television monitors and review laboratory test reports for process adjustments.
- Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality.
- Start pumps to wash and rinse reactor vessels, to exhaust gases or vapors, to regulate the flow of oil, steam, air, or perfume to towers, or to add products to converter or blending vessels.
- Notify maintenance, stationary engineering, or other auxiliary personnel to correct equipment malfunctions or to adjust power, steam, water, or air supplies.
- Gauge tank levels, using calibrated rods.
- Calculate material requirements or yields according to formulas.
- Direct workers engaged in operating machinery that regulates the flow of materials and products.
- Supervise the cleaning of towers, strainers, or spray tips.
- Repair or replace damaged equipment.
- Defrost frozen valves, using steam hoses.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Inspect lens blanks to detect flaws, verify smoothness of surface, and ensure thickness of coating on lenses.
- Set up machines to polish, bevel, edge, or grind lenses, flats, blanks, or other precision optical elements.
- Inspect, weigh, and measure mounted or unmounted lenses after completion to verify alignment and conformance to specifications, using precision instruments.
- Shape lenses appropriately so that they can be inserted into frames.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Mount, secure, and align finished lenses in frames or optical assemblies, using precision hand tools.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Adjust lenses and frames to correct alignment.
- Select lens blanks, molds, tools, and polishing or grinding wheels, according to production specifications.
- Assemble eyeglass frames and attach shields, nose pads, and temple pieces, using pliers, screwdrivers, and drills.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Repair broken parts, using precision hand tools and soldering irons.
- Immerse eyeglass frames in solutions to harden, soften, or dye frames.
- Lay out lenses and trace lens outlines on glass, using templates.
- Control equipment that coats lenses to alter their reflective qualities.
- Remove lenses from molds and separate lenses in containers for further processing or storage.
- Tint lenses according to customer specifications.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Place tires into molds for new tread.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Trim excess rubber and imperfections during retreading processes.
- Fill cuts and holes in tires, using hot rubber.
- Fit inner tubes and final layers of rubber onto tires.
- Buff tires according to specifications for width and undertread depth.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Start rollers that bond tread and plies as drums revolve.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Measure tires to determine mold size requirements.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Cut plies at splice points, and press ends together to form continuous bands.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Clean and paint completed tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Place tires into molds for new tread.
- Set up face blocks, jigs, and fixtures.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
- Study engineering drawings and blueprints to determine materials requirements and task sequences.
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Tack-weld fitted parts together.
- Move parts into position, manually or with hoists or cranes.
- Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
- Lift or move materials and finished products, using large cranes.
- Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
- Hammer, chip, and grind workpieces to cut, bend, and straighten metal.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
- Smooth workpiece edges and fix taps, tubes, and valves.
- Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone.
- Design and construct templates and fixtures, using hand tools.
- Direct welders to build up low spots or short pieces with weld.
- Heat-treat parts, using acetylene torches.
- Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers.
- Erect ladders and scaffolding to fit together large assemblies.
- Preheat workpieces to make them malleable, using hand torches or furnaces.
- Install boilers, containers, and other structures.
- Troubleshoot and repair electrical or mechanical equipment.
- Set up face blocks, jigs, and fixtures.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Hold or position spray guns to direct spray onto articles.
- Thread or feed items or products through or around machine rollers and dryers.
- Dispose of hazardous waste in an appropriate manner.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Hold or position spray guns to direct spray onto articles.
- Thread or feed items or products through or around machine rollers and dryers.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Load or feed workpieces into welding machines to join or bond components.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Give directions to other workers regarding machine set-up and use.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Remove completed workpieces or parts from machinery, using hand tools.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Transfer components, metal products, or assemblies, using moving equipment.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Tend auxiliary equipment used in welding processes.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Anneal finished workpieces to relieve internal stress.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Load or feed workpieces into welding machines to join or bond components.
- Repair or replace gas piping.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Repair or replace gas piping.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Rework, repair, or replace damaged parts or assemblies.
- Read and interpret assembly blueprints or specifications manuals, and plan assembly or building operations.
- Inspect, operate, and test completed products to verify functioning, machine capabilities, or conformance to customer specifications.
- Position or align components for assembly, manually or using hoists.
- Set and verify parts clearances.
- Verify conformance of parts to stock lists or blueprints, using measuring instruments such as calipers, gauges, or micrometers.
- Fasten or install piping, fixtures, or wiring and electrical components to form assemblies or subassemblies, using hand tools, rivet guns, or welding equipment.
- Remove rough spots and smooth surfaces to fit, trim, or clean parts, using hand tools or power tools.
- Lay out and drill, ream, tap, or cut parts for assembly.
- Assemble systems of gears by aligning and meshing gears in gearboxes.
- Set up and operate metalworking machines, such as milling or grinding machines, to shape or fabricate parts.
- Maintain and lubricate parts or components.
- Rework, repair, or replace damaged parts or assemblies.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Transport metal ingots to storage areas, using forklifts.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Add metal to molds to compensate for shrinkage.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Replace worn or defective equipment parts, using hand tools.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems.
- Press and adjust controls to activate, set, and regulate equipment according to specifications.
- Record gauge readings, test results, and shift production in log books.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Load equipment receptacles or conveyors with material to be processed, by hand or using hoists.
- Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing.
- Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions.
- Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures.
- Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers.
- Direct crane operators and crew members to load vessels with materials to be processed.
- Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Replace worn or defective equipment parts, using hand tools.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Record temperatures, amounts of materials processed, or test results on report forms.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Assemble equipment, and attach pipes, fittings, or valves, using hand tools.
- Measure or weigh specified amounts of ingredients or materials, and load them into tanks, vats, hoppers, or other equipment.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Inspect and flush lines with solutions or steam, and spray equipment with sterilizing solutions.
- Load and position wrapping paper, sticks, bags, or cartons into dispensing machines.
- Sample and test product characteristics such as specific gravity, acidity, and sugar content, using hydrometers, pH meters, or refractometers.
- Start agitators to blend contents, or start beater, scraper, and expeller blades to mix contents with air and prevent sticking.
- Place or position containers into equipment, and remove containers after completion of cooling or freezing processes.
- Scrape, dislodge, or break excess frost, ice, or frozen product from equipment to prevent accumulation, using hands and hand tools.
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Stir material with spoons or paddles to mix ingredients or allow even cooling and prevent coagulation.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Rebuild, repair, or replace biofuels processing equipment components.
- Monitor batch, continuous flow, or hybrid biofuels production processes.
- Operate valves, pumps, engines, or generators to control and adjust biofuels production.
- Monitor and record biofuels processing data.
- Collect biofuels samples and perform routine laboratory tests or analyses to assess biofuels quality.
- Operate equipment, such as a centrifuge, to extract biofuels products and secondary by-products or reusable fractions.
- Process refined feedstock with additives in fermentation or reaction process vessels.
- Operate chemical processing equipment for the production of biofuels.
- Monitor and record flow meter performance.
- Inspect biofuels plant or processing equipment regularly, recording or reporting damage and mechanical problems.
- Measure and monitor raw biofuels feedstock.
- Preprocess feedstock in preparation for physical, chemical, or biological fuel production processes.
- Calculate, measure, load, or mix refined feedstock used in biofuels production.
- Monitor stored biofuels products or secondary by-products until reused or transferred to users.
- Assess the quality of biofuels additives for reprocessing.
- Clean biofuels processing work area, ensuring compliance with safety regulations.
- Perform routine maintenance on mechanical, electrical, or electronic equipment or instruments used in the processing of biofuels.
- Calibrate liquid flow devices and meters, including fuel, chemical, and water meters.
- Coordinate raw product sourcing or collection.
- Rebuild, repair, or replace biofuels processing equipment components.
- Maintain and repair laboratory equipment.
- Evaluate and grade students' class work, laboratory work, assignments, and papers.
- Prepare course materials, such as syllabi, homework assignments, and handouts.
- Compile, administer, and grade examinations, or assign this work to others.
- Prepare and deliver lectures to undergraduate or graduate students on topics such as quantum mechanics, particle physics, and optics.
- Maintain regularly scheduled office hours to advise and assist students.
- Supervise undergraduate or graduate teaching, internship, and research work.
- Initiate, facilitate, and moderate classroom discussions.
- Maintain student attendance records, grades, and other required records.
- Plan, evaluate, and revise curricula, course content, course materials, and methods of instruction.
- Supervise students' laboratory work.
- Keep abreast of developments in the field by reading current literature, talking with colleagues, and participating in professional conferences.
- Collaborate with colleagues to address teaching and research issues.
- Advise students on academic and vocational curricula and on career issues.
- Conduct research in a particular field of knowledge and publish findings in professional journals, books, or electronic media.
- Select and obtain materials and supplies, such as textbooks and laboratory equipment.
- Perform administrative duties, such as serving as department head.
- Participate in student recruitment, registration, and placement activities.
- Serve on academic or administrative committees that deal with institutional policies, departmental matters, and academic issues.
- Write grant proposals to procure external research funding.
- Compile bibliographies of specialized materials for outside reading assignments.
- Participate in campus and community events.
- Act as advisers to student organizations.
- Provide professional consulting services to government or industry.
- Review articles to determine their suitability for publication.
- Maintain and repair laboratory equipment.
