- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 4 | 5 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 4 | 4 | 2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
| 3 | 4 | 2 | 51-4081.00 | Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 3 | 3 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 3 | 3 | 2 | 51-9194.00 | Etchers and Engravers |
| 2 | 4 | 2 | 51-9196.00 | Paper Goods Machine Setters, Operators, and Tenders |
| 2 | 3 | 2 | 51-4035.00 | Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 3 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 2 | 2 | 51-6062.00 | Textile Cutting Machine Setters, Operators, and Tenders |
| 1 | 4 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-4034.00 | Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-9161.00 | Computer Numerically Controlled Tool Operators |
| 1 | 3 | 1 | 51-6021.00 | Pressers, Textile, Garment, and Related Materials |
| 1 | 2 | 2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
| 1 | 2 | 3 | 51-9195.05 | Potters, Manufacturing |
| 1 | 2 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-2031.00 | Engine and Other Machine Assemblers |
| 1 | 1 | 2 | 51-4022.00 | Forging Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 49-9094.00 | Locksmiths and Safe Repairers |
| 1 | 1 | 3 | 51-7031.00 | Model Makers, Wood |
| 1 | 1 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
| 1 | 1 | 2 | 51-9083.00 | Ophthalmic Laboratory Technicians |
| 1 | 1 | 3 | 51-7032.00 | Patternmakers, Wood |
| 1 | 1 | 2 | 51-6063.00 | Textile Knitting and Weaving Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-6064.00 | Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders |
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Start machines, monitor their operations, and record operational data.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Load workpieces, plastic material, or chemical solutions into machines.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Mark identifying data on workpieces.
- Clean work area.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Operate forklifts to deliver materials.
- Lubricate workpieces with oil.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Thread ends of metal coils from reels through slitters and secure ends on recoilers.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Replace defective blades or wheels, using hand tools.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Preheat workpieces, using heating furnaces or hand torches.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Hone cutters with oilstones to remove nicks.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
- Clean or maintain products, machines, or work areas.
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
- Grease or oil woodworking machines.
- Unclamp workpieces and remove them from machines.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
- Control hoists to remove parts or products from work stations.
- Sharpen knives, bits, or other cutting or shaping tools.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
- Compute data, such as gear dimensions or machine settings, applying knowledge of shop mathematics.
- Instruct other workers in machine set-up and operation.
- Record operational data, such as pressure readings, lengths of strokes, feed rates, or speeds.
- Extract or lift jammed pieces from machines, using fingers, wire hooks, or lift bars.
- Measure and mark reference points and cutting lines on workpieces, using traced templates, compasses, and rules.
- Write programs for computer numerical control (CNC) machines to cut metal and plastic materials.
- Align layout marks with dies or blades.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Move controls or mount gears, cams, or templates in machines to set feed rates and cutting speeds, depths, and angles.
- Start machines and turn handwheels or valves to engage feeding, cooling, and lubricating mechanisms.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Mount and bolt sawing blades or attachments to machine shafts.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Pull tables back against stops and depress pedals to advance cutterheads that shape stock ends.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Unload and roll logs from trucks to sawmill decks or to carriages, or move logs in ponds, using pike poles.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Carve designs and letters onto metal for transfer to other surfaces.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Adjust guide assemblies, forming bars, and folding mechanisms according to specifications, using hand tools.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Examine completed work to detect defects and verify conformance to work orders, and adjust machinery as necessary to correct production problems.
- Start machines and move controls to regulate tension on pressure rolls, to synchronize speed of machine components, and to adjust temperatures of glue or paraffin.
- Observe operation of various machines to detect and correct machine malfunctions such as improper forming, glue flow, or pasteboard tension.
- Disassemble machines to maintain, repair, or replace broken or worn parts, using hand or power tools.
- Install attachments to machines for gluing, folding, printing, or cutting.
- Cut products to specified dimensions, using hand or power cutters.
- Place rolls of paper or cardboard on machine feed tracks, and thread paper through gluing, coating, and slitting rollers.
- Monitor finished cartons as they drop from forming machines into rotating hoppers and into gravity feed chutes to prevent jamming.
- Fill glue and paraffin reservoirs, and position rollers to dispense glue onto paperboard.
- Stamp products with information such as dates, using hand stamps or automatic stamping devices.
- Remove finished cores, and stack or place them on conveyors for transfer to other work areas.
- Lift tote boxes of finished cartons, and dump cartons into feed hoppers.
- Load automatic stapling mechanisms.
- Adjust guide assemblies, forming bars, and folding mechanisms according to specifications, using hand tools.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Examine completed work to detect defects and verify conformance to work orders, and adjust machinery as necessary to correct production problems.
- Start machines and move controls to regulate tension on pressure rolls, to synchronize speed of machine components, and to adjust temperatures of glue or paraffin.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Remove workpieces from machines, and check to ensure that they conform to specifications, using measuring instruments such as microscopes, gauges, calipers, and micrometers.
- Verify alignment of workpieces on machines, using measuring instruments such as rules, gauges, or calipers.
- Observe milling or planing machine operation, and adjust controls to ensure conformance with specified tolerances.
- Select and install cutting tools and other accessories according to specifications, using hand tools or power tools.
- Position and secure workpieces on machines, using holding devices, measuring instruments, hand tools, and hoists.
- Replace worn tools, using hand tools, and sharpen dull tools, using bench grinders.
- Study blueprints, layouts, sketches, or work orders to assess workpiece specifications and to determine tooling instructions, tools and materials needed, and sequences of operations.
- Compute dimensions, tolerances, and angles of workpieces or machines according to specifications and knowledge of metal properties and shop mathematics.
- Move cutters or material manually or by turning handwheels, or engage automatic feeding mechanisms to mill workpieces to specifications.
- Mount attachments and tools, such as pantographs, engravers, or routers, to perform other operations, such as drilling or boring.
- Record production output.
- Make templates or cutting tools.
- Move controls to set cutting specifications, to position cutting tools and workpieces in relation to each other, and to start machines.
- Select cutting speeds, feed rates, and depths of cuts, applying knowledge of metal properties and shop mathematics.
- Turn valves or pull levers to start and regulate the flow of coolant or lubricant to work areas.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments, such as gauges or micrometers.
- Measure workpieces and lay out work, using precision measuring devices.
- Observe machine operations to detect any problems, making necessary adjustments to correct problems.
- Move machine controls to index workpieces, and to adjust machines for pre-selected operational settings.
- Study blueprints, work orders, or machining instructions to determine product specifications, tool requirements, and operational sequences.
- Select machine tooling to be used, using knowledge of machine and production requirements.
- Mount and position tools in machine chucks, spindles, or other tool holding devices, using hand tools.
- Activate machine start-up switches to grind, lap, hone, debar, shear, or cut workpieces, according to specifications.
- Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.
- Set and adjust machine controls according to product specifications, using knowledge of machine operation.
- Lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables, faceplates, or chucks, using clamps.
- Repair or replace machine parts, using hand tools, or notify engineering personnel when corrective action is required.
- Compute machine indexings and settings for specified dimensions and base reference points.
- Maintain stocks of machine parts and machining tools.
- Thread and hand-feed materials through machine cutters or abraders.
- Adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.
- Slide spacers between buffs on spindles to set spacing.
- Brush or spray lubricating compounds on workpieces, or turn valve handles and direct flow of coolant against tools and workpieces.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Inspect products to ensure that the quality standards and specifications are met.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Notify supervisors of mechanical malfunctions.
- Inspect machinery to determine whether repairs are needed.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Repair or replace worn or defective parts or components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Install gears and holding devices on conveyor equipment.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Spray coating in specified patterns according to instructions.
- Clean and maintain equipment, using water hoses and scrapers.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Clean workpieces, using wire brushes.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Install gears and holding devices on conveyor equipment.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Adjust machine controls and change tool settings to keep dimensions within specified tolerances.
- Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.
- Inspect sample workpieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.
- Start lathe or turning machines and observe operations to ensure that specifications are met.
- Position, secure, and align cutting tools in toolholders on machines, using hand tools, and verify their positions with measuring instruments.
- Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.
- Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.
- Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.
- Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.
- Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.
- Lift metal stock or workpieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.
- Move toolholders manually or by turning handwheels, or engage automatic feeding mechanisms to feed tools to and along workpieces.
- Mount attachments, such as relieving or tracing attachments, to perform operations, such as duplicating contours of templates or trimming workpieces.
- Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to workpieces.
- Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.
- Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Control coolant systems.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Implement changes to machine programs, and enter new specifications, using computers.
- Calculate machine speed and feed ratios and the size and position of cuts.
- Transfer commands from servers to computer numerical control (CNC) modules, using computer network links.
- Remove and replace dull cutting tools.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Insert control instructions into machine control units to start operation.
- Modify cutting programs to account for problems encountered during operation, and save modified programs.
- Write simple programs for computer-controlled machine tools.
- Lift workpieces to machines manually or with hoists or cranes.
- Input initial part dimensions into machine control panels.
- Set up future jobs while machines are operating.
- Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
- Stack or load finished items, or place items on conveyor systems.
- Clean machines, tooling, or parts, using solvents or solutions and rags.
- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
- Lay out and mark areas of parts to be shot peened and fill hoppers with shot.
- Examine electronic components for defects or completeness of laser-beam trimming, using microscopes.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Control coolant systems.
- Position materials such as cloth garments, felt, or straw on tables, dies, or feeding mechanisms of pressing machines, or on ironing boards or work tables.
- Activate and adjust machine controls to regulate temperature and pressure of rollers, ironing shoes, or plates, according to specifications.
- Select, install, and adjust machine components, including pressing forms, rollers, and guides, using hoists and hand tools.
- Hang, fold, package, and tag finished articles for delivery to customers.
- Operate steam, hydraulic, or other pressing machines to remove wrinkles from garments and flatwork items, or to shape, form, or patch articles.
- Straighten, smooth, or shape materials to prepare them for pressing.
- Remove finished pieces from pressing machines and hang or stack them for cooling, or forward them for additional processing.
- Finish pleated garments, determining sizes of pleats from evidence of old pleats or from work orders, using machine presses or hand irons.
- Lower irons, rams, or pressing heads of machines into position over material to be pressed.
- Identify and treat spots on garments.
- Shrink, stretch, or block articles by hand to conform to original measurements, using forms, blocks, and steam.
- Finish fancy garments such as evening gowns and costumes, using hand irons to produce high quality finishes.
- Push and pull irons over surfaces of articles to smooth or shape them.
- Finish pants, jackets, shirts, skirts and other dry-cleaned and laundered articles, using hand irons.
- Slide material back and forth over heated, metal, ball-shaped forms to smooth and press portions of garments that cannot be satisfactorily pressed with flat pressers or hand irons.
- Select appropriate pressing machines, based on garment properties such as heat tolerance.
- Spray water over fabric to soften fibers when not using steam irons.
- Moisten materials to soften and smooth them.
- Clean and maintain pressing machines, using cleaning solutions and lubricants.
- Press ties on small pressing machines.
- Block or shape knitted garments after cleaning.
- Use covering cloths to prevent equipment from damaging delicate fabrics.
- Examine and measure finished articles to verify conformance to standards, using measuring devices such as tape measures and micrometers.
- Finish velvet garments by steaming them on bucks of hot-head presses or steam tables, and brushing pile (nap) with handbrushes.
- Measure fabric to specifications, cut uneven edges with shears, fold material, and press it with an iron to form a heading.
- Insert heated metal forms into ties and touch up rough places with hand irons.
- Brush materials made of suede, leather, or felt to remove spots or to raise and smooth naps.
- Sew ends of new material to leaders or to ends of material in pressing machines, using sewing machines.
- Position materials such as cloth garments, felt, or straw on tables, dies, or feeding mechanisms of pressing machines, or on ironing boards or work tables.
- Activate and adjust machine controls to regulate temperature and pressure of rollers, ironing shoes, or plates, according to specifications.
- Select, install, and adjust machine components, including pressing forms, rollers, and guides, using hoists and hand tools.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Observe drilling or boring machine operations to detect any problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- Dress grinding wheels, according to specifications.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Remove and replace worn or broken machine parts, using hand tools.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Operate gas or electric kilns to fire pottery pieces.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs.
- Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels.
- Move pieces from wheels so that they can dry.
- Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work.
- Attach handles to pottery pieces.
- Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes.
- Pack and ship pottery to stores or galleries for retail sale.
- Smooth surfaces of finished pieces, using rubber scrapers and wet sponges.
- Pull wires through bases of articles and wheels to separate finished pieces.
- Design spaces to display pottery for sale.
- Verify accuracy of shapes and sizes of objects, using calipers and templates.
- Examine finished ware for defects and measure dimensions, using rule and thickness gauge.
- Maintain supplies of tools, equipment, and materials, and order additional supplies as needed.
- Operate pug mills to blend and extrude clay.
- Perform test-fires of pottery to determine how to achieve specific colors and textures.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Operate drying chambers to dry or finish molded ceramic ware.
- Design clay forms and molds, and decorations for forms.
- Teach pottery classes.
- Operate jigger machines to form ceramic ware, such as bowls, cups, plates, and saucers.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Set and verify parts clearances.
- Read and interpret assembly blueprints or specifications manuals, and plan assembly or building operations.
- Inspect, operate, and test completed products to verify functioning, machine capabilities, or conformance to customer specifications.
- Position or align components for assembly, manually or using hoists.
- Verify conformance of parts to stock lists or blueprints, using measuring instruments such as calipers, gauges, or micrometers.
- Fasten or install piping, fixtures, or wiring and electrical components to form assemblies or subassemblies, using hand tools, rivet guns, or welding equipment.
- Remove rough spots and smooth surfaces to fit, trim, or clean parts, using hand tools or power tools.
- Lay out and drill, ream, tap, or cut parts for assembly.
- Rework, repair, or replace damaged parts or assemblies.
- Assemble systems of gears by aligning and meshing gears in gearboxes.
- Set up and operate metalworking machines, such as milling or grinding machines, to shape or fabricate parts.
- Maintain and lubricate parts or components.
- Set and verify parts clearances.
- Select, align, and bolt positioning fixtures, stops, and specified dies to rams and anvils, forging rolls, or presses and hammers.
- Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.
- Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.
- Measure and inspect machined parts to ensure conformance to product specifications.
- Set up, operate, or tend presses and forging machines to perform hot or cold forging by flattening, straightening, bending, cutting, piercing, or other operations to taper, shape, or form metal.
- Turn handles or knobs to set pressures and depths of ram strokes and to synchronize machine operations.
- Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.
- Start machines to produce sample workpieces, and observe operations to detect machine malfunctions and to verify that machine setups conform to specifications.
- Confer with other workers about machine setups and operational specifications.
- Trim and compress finished forgings to specified tolerances.
- Remove dies from machines when production runs are finished.
- Repair, maintain, and replace parts on dies.
- Sharpen cutting tools and drill bits, using bench grinders.
- Select, align, and bolt positioning fixtures, stops, and specified dies to rams and anvils, forging rolls, or presses and hammers.
- Set up and maintain master key systems.
- Cut new or duplicate keys, using key cutting machines.
- Disassemble mechanical or electrical locking devices, and repair or replace worn tumblers, springs, and other parts, using hand tools.
- Cut new or duplicate keys, using impressions or code key machines.
- Open safe locks by drilling.
- Install door hardware, such as locks and closers.
- Insert new or repaired tumblers into locks to change combinations.
- Keep records of company locks and keys.
- Move picklocks in cylinders to open door locks without keys.
- Repair and adjust safes, vault doors, and vault components, using hand tools, lathes, drill presses, and welding and acetylene cutting apparatus.
- Install safes, vault doors, and deposit boxes according to blueprints, using equipment such as power drills, taps, dies, truck cranes, and dollies.
- Install alarm and electronic access systems.
- Unlock cars and other vehicles.
- Remove interior and exterior finishes on safes and vaults, and spray on new finishes.
- Set up and maintain master key systems.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and planers to cut and shape sections, parts, and patterns, according to specifications.
- Verify dimensions and contours of models during hand-forming processes, using templates and measuring devices.
- Read blueprints, drawings, or written specifications, and consult with designers to determine sizes and shapes of patterns and required machine setups.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, screws, and other fasteners.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Select wooden stock, determine layouts, and mark layouts of parts on stock, using precision equipment such as scribers, squares, and protractors.
- Construct wooden models, patterns, templates, full scale mock-ups, and molds for parts of products and production tools.
- Mark identifying information on patterns, parts, and templates to indicate assembly methods and details.
- Plan, lay out, and draw outlines of units, sectional patterns, or full-scale mock-ups of products.
- Fabricate work aids such as scrapers or templates.
- Maintain pattern records for reference.
- Build jigs that can be used as guides for assembling oversized or special types of box shooks.
- Issue patterns to designated machine operators.
- Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and planers to cut and shape sections, parts, and patterns, according to specifications.
- Adjust guides and stops to control depths and widths of cuts.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Count or weigh and bundle items.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Adjust guides and stops to control depths and widths of cuts.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Inspect lens blanks to detect flaws, verify smoothness of surface, and ensure thickness of coating on lenses.
- Set up machines to polish, bevel, edge, or grind lenses, flats, blanks, or other precision optical elements.
- Inspect, weigh, and measure mounted or unmounted lenses after completion to verify alignment and conformance to specifications, using precision instruments.
- Shape lenses appropriately so that they can be inserted into frames.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Mount, secure, and align finished lenses in frames or optical assemblies, using precision hand tools.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Adjust lenses and frames to correct alignment.
- Select lens blanks, molds, tools, and polishing or grinding wheels, according to production specifications.
- Assemble eyeglass frames and attach shields, nose pads, and temple pieces, using pliers, screwdrivers, and drills.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Repair broken parts, using precision hand tools and soldering irons.
- Immerse eyeglass frames in solutions to harden, soften, or dye frames.
- Lay out lenses and trace lens outlines on glass, using templates.
- Control equipment that coats lenses to alter their reflective qualities.
- Remove lenses from molds and separate lenses in containers for further processing or storage.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and lathes to cut and shape sections, parts, and patterns, according to specifications.
- Read blueprints, drawings, or written specifications to determine sizes and shapes of patterns and required machine setups.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, and screws.
- Lay out patterns on wood stock and draw outlines of units, sectional patterns, or full-scale mock-ups of products, based on blueprint specifications and sketches, and using marking and measuring devices.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Divide patterns into sections according to shapes of castings to facilitate removal of patterns from molds.
- Verify dimensions of completed patterns, using templates, straightedges, calipers, or protractors.
- Correct patterns to compensate for defects in castings.
- Finish completed products or models with shellac, lacquer, wax, or paint.
- Estimate costs for patternmaking jobs.
- Mark identifying information such as colors or codes on patterns, parts, and templates to indicate assembly methods.
- Repair broken or damaged patterns.
- Maintain pattern records for reference.
- Glue fillets along interior angles of patterns.
- Construct wooden models, templates, full scale mock-ups, jigs, or molds for shaping parts of products.
- Compute dimensions, areas, volumes, and weights.
- Select lumber to be used for patterns.
- Collect and store patterns and lumber.
- Inventory equipment and supplies, ordering parts and tools as necessary.
- Issue patterns to designated machine operators.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and lathes to cut and shape sections, parts, and patterns, according to specifications.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Observe woven cloth to detect weaving defects.
- Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
- Remove defects in cloth by cutting and pulling out filling.
- Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
- Inspect products to ensure that specifications are met and to determine if machines need adjustment.
- Notify supervisors or repair staff of mechanical malfunctions.
- Start machines, monitor operations, and make adjustments as needed.
- Stop machines when specified amounts of product have been produced.
- Inspect machinery to determine whether repairs are needed.
- Confer with co-workers to obtain information about orders, processes, or problems.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Program electronic equipment.
- Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.
- Record information about work completed and machine settings.
- Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Repair or replace worn or defective needles and other components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.
- Adjust machine heating mechanisms, tensions, and speeds to produce specified products.
- Wash and blend wool, yarn, or cloth.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Notify supervisors or mechanics of equipment malfunctions.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Start machines, monitor operation, and make adjustments as needed.
- Inspect machinery to determine whether repairs are needed.
- Record production data such as numbers and types of bobbins wound.
- Replace depleted supply packages with full packages.
- Stop machines when specified amount of products has been produced.
- Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
- Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
- Adjust machine settings such as speed or tension to produce products that meet specifications.
- Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Tend spinning frames that draw out and twist roving or sliver into yarn.
- Remove spindles from machines and bobbins from spindles.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
- Repair or replace worn or defective parts or components, using hand tools.
- Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Tend machines that wind wire onto bobbins, preparatory to formation of wire netting used in reinforcing sheet glass.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
