- Assemble new or reconditioned appliances.
Occupations with related tasks Save Table: XLSX CSV
- Assemble and install equipment, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Weld, repair, and fabricate equipment or machinery.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Install robot and modify its program, using teach pendant.
- Assemble and install equipment, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Assemble new bicycles.
- Build wheels by cutting and threading new spokes.
- Install and adjust brakes and brake pads.
- Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats.
- Install new tires and tubes.
- Install and adjust speed and gear mechanisms.
- Help customers select bicycles that fit their body sizes and intended bicycle uses.
- Align wheels.
- Sell bicycles and accessories.
- Clean and lubricate bicycle parts.
- Order bicycle parts.
- Disassemble axles to repair, adjust, and replace defective parts, using hand tools.
- Shape replacement parts, using bench grinders.
- Repair holes in tire tubes, using scrapers and patches.
- Assemble new bicycles.
- Build wheels by cutting and threading new spokes.
- Install and adjust brakes and brake pads.
- Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats.
- Install new tires and tubes.
- Install and adjust speed and gear mechanisms.
- Wind large springs with upward motion of arm.
- Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
- Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
- Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
- Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
- Repair or replace worn or broken door parts, using hand tools.
- Complete required paperwork, such as work orders, according to services performed or required.
- Collect payment upon job completion.
- Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
- Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
- Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
- Set doors into place or stack hardware sections into openings after rail or track installation.
- Operate lifts, winches, or chain falls to move heavy curtain doors.
- Remove or disassemble defective automatic mechanical door closers, using hand tools.
- Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
- Prepare doors for hardware installation, such as drilling holes to install locks.
- Run low voltage wiring on ceiling surfaces, using insulated staples.
- Cut door stops or angle irons to fit openings.
- Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
- Install dock seals, bumpers, or shelters.
- Order replacement springs, sections, or slats.
- Lubricate door closer oil chambers, and pack spindles with leather washers.
- Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.
- Bore or cut holes in flooring as required for installation, using hand or power tools.
- Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
- Wind large springs with upward motion of arm.
- Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
- Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
- Hammer required counterweights onto rims of wheels.
- Remount wheels onto vehicles.
- Reassemble tires onto wheels.
- Rotate tires to different positions on vehicles, using hand tools.
- Raise vehicles, using hydraulic jacks.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Identify tire size and ply and inflate tires accordingly.
- Replace valve stems and remove puncturing objects.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Inspect tire casings for defects, such as holes or tears.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Clean and tidy up the shop.
- Buff defective areas of inner tubes, using scrapers.
- Order replacements for tires or tubes.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Inflate inner tubes and immerse them in water to locate leaks.
- Clean sides of whitewall tires.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Hammer required counterweights onto rims of wheels.
- Remount wheels onto vehicles.
- Reassemble tires onto wheels.
- Rotate tires to different positions on vehicles, using hand tools.
- Reassemble and test subassembly units.
- Reassemble frames and reinstall engines after repairs.
- Install motorcycle accessories.
- Mount, balance, change, or check condition or pressure of tires.
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.
- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.
- Connect test panels to engines and measure generator output, ignition timing, or other engine performance indicators.
- Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline or oil tanks, starters, or mufflers.
- Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.
- Repair or adjust motorcycle subassemblies, such as forks, transmissions, brakes, or drive chains, according to specifications.
- Remove cylinder heads and grind valves to scrape off carbon and replace defective valves, pistons, cylinders, or rings, using hand and power tools.
- Hammer out dents and bends in frames and weld tears and breaks.
- Reassemble and test subassembly units.
- Reassemble frames and reinstall engines after repairs.
- Install motorcycle accessories.
- Assemble boilers at installation sites, using tools such as levels, plumb bobs, hammers, torches, or other hand tools.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
- Order parts, supplies, or equipment from catalogs or suppliers.
- Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
- Design new equipment to aid in the repair or maintenance of machines, mechanical equipment, or building structures.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
- Estimate costs to repair machinery, equipment, or building structures.
- Align and balance new equipment after installation.
- Record type and cost of maintenance or repair work.
- Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories.
- Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools.
- Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
- Install equipment to improve the energy or operational efficiency of residential or commercial buildings.
- Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures, or tools.
- Perform general cleaning of buildings or properties.
- Train or manage maintenance personnel or subcontractors.
- Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
- Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
- Provide groundskeeping services, such as landscaping or snow removal.
- Operate cutting torches or welding equipment to cut or join metal parts.
- Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, or other measuring instruments.
- Position, attach, or blow insulating materials to prevent energy losses from buildings, pipes, or other structures or objects.
- Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices.
- Assemble boilers at installation sites, using tools such as levels, plumb bobs, hammers, torches, or other hand tools.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Assemble gear systems, and align frames and gears.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Repair and replace damaged or worn parts.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Read and understand operating manuals, blueprints, and technical drawings.
- Overhaul and test machines or equipment to ensure operating efficiency.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Repair, rewire, and troubleshoot electrical systems.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Examine parts for damage or excessive wear, using micrometers and gauges.
- Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
- Research, order, and maintain parts inventory for services and repairs.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
- Adjust and maintain industrial machinery, using control and regulating devices.
- Fabricate needed parts or items from sheet metal.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Assemble gear systems, and align frames and gears.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.
- Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.
- Adhere to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas.
- Drive vehicles equipped with tools and materials to job sites.
- Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.
- Climb poles or use truck-mounted buckets to access equipment.
- Inspect and test power lines and auxiliary equipment to locate and identify problems, using reading and testing instruments.
- Coordinate work assignment preparation and completion with other workers.
- Replace or straighten damaged poles.
- String wire conductors and cables between poles, towers, trenches, pylons, and buildings, setting lines in place and using winches to adjust tension.
- Dig holes, using augers, and set poles, using cranes and power equipment.
- Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.
- Identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.
- Install watt-hour meters and connect service drops between power lines and consumers' facilities.
- Test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.
- Place insulating or fireproofing materials over conductors and joints.
- Splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.
- Trim trees that could be hazardous to the functioning of cables or wires.
- Pull up cable by hand from large reels mounted on trucks.
- Lay underground cable directly in trenches, or string it through conduit running through the trenches.
- Cut trenches for laying underground cables, using trenchers and cable plows.
- Cut and peel lead sheathing and insulation from defective or newly installed cables and conduits prior to splicing.
- Clean, tin, and splice corresponding conductors by twisting ends together or by joining ends with metal clamps and soldering connections.
- Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.
- Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.
- Assemble machines according to specifications, using hand or power tools and measuring devices.
- Reassemble machines after making repairs or replacing parts.
- Converse with customers to determine details of equipment problems.
- Disassemble machines to examine parts, such as wires, gears, or bearings for wear or defects, using hand or power tools and measuring devices.
- Advise customers concerning equipment operation, maintenance, or programming.
- Align, adjust, or calibrate equipment according to specifications.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Travel to customers' stores or offices to service machines or to provide emergency repair service.
- Maintain parts inventories and order any additional parts needed for repairs.
- Operate machines to test functioning of parts or mechanisms.
- Reinstall software programs or adjust settings on existing software to fix machine malfunctions.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Maintain records of equipment maintenance work or repairs.
- Test new systems to ensure that they are in working order.
- Complete repair bills, shop records, time cards, or expense reports.
- Install and configure new equipment, including operating software or peripheral equipment.
- Analyze equipment performance records to assess equipment functioning.
- Read specifications, such as blueprints, charts, or schematics, to determine machine settings or adjustments.
- Update existing equipment, performing tasks such as installing updated circuit boards or additional memory.
- Test components or circuits of faulty equipment to locate defects, using oscilloscopes, signal generators, ammeters, voltmeters, or special diagnostic software programs.
- Lay cable and hook up electrical connections between machines, power sources, and phone lines.
- Enter information into computers to copy programs from one electronic component to another or to draw, modify, or store schematics.
- Fill machines with toners, inks, or other duplicating fluids.
- Train new repairers.
- Calibrate testing instruments.
- Assemble machines according to specifications, using hand or power tools and measuring devices.
- Reassemble machines after making repairs or replacing parts.
- Assemble bars onto percussion instruments.
- Reassemble instruments following repair, using hand tools and power tools and glue, hair, yarn, resin, or clamps, and lubricate instruments as necessary.
- Play instruments to evaluate their sound quality and to locate any defects.
- Adjust string tensions to tune instruments, using hand tools and electronic tuning devices.
- Disassemble instruments and parts for repair and adjustment.
- Repair or replace musical instrument parts and components, such as strings, bridges, felts, and keys, using hand and power tools.
- Inspect instruments to locate defects, and to determine their value or the level of restoration required.
- Compare instrument pitches with tuning tool pitches to tune instruments.
- String instruments, and adjust trusses and bridges of instruments to obtain specified string tensions and heights.
- Polish instruments, using rags and polishing compounds, buffing wheels, or burnishing tools.
- Repair cracks in wood or metal instruments, using pinning wire, lathes, fillers, clamps, or soldering irons.
- Mix and measure glue that will be used for instrument repair.
- Shape old parts and replacement parts to improve tone or intonation, using hand tools, lathes, or soldering irons.
- Refinish instruments to protect and decorate them, using hand tools, buffing tools, and varnish.
- Make wood replacement parts, using woodworking machines and hand tools.
- Align pads and keys on reed or wind instruments.
- Solder posts and parts to hold them in their proper places.
- Remove dents and burrs from metal instruments, using mallets and burnishing tools.
- Test tubes and pickups in electronic amplifier units, and solder parts and connections as necessary.
- Adjust felt hammers on pianos to increase tonal mellowness or brilliance, using sanding paddles, lacquer, or needles.
- Remove irregularities from tuning pins, strings, and hammers of pianos, using wood blocks or filing tools.
- Strike wood, fiberglass, or metal bars of instruments, and use tuned blocks, stroboscopes, or electronic tuners to evaluate tones made by instruments.
- Wash metal instruments in lacquer-stripping and cyanide solutions to remove lacquer and tarnish.
- Deliver pianos to purchasers or to locations of their use.
- Remove drumheads by removing tension rods with drum keys and cutting tools.
- Solder or weld frames of mallet instruments and metal drum parts.
- Repair breaks in percussion instruments, such as drums and cymbals, using drill presses, power saws, glue, clamps, grinding wheels, or other hand tools.
- Clean, sand, and paint parts of percussion instruments to maintain their condition.
- Replace xylophone bars and wheels.
- Assemble bars onto percussion instruments.
- Reassemble instruments following repair, using hand tools and power tools and glue, hair, yarn, resin, or clamps, and lubricate instruments as necessary.
- Devise, fabricate, or assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Assemble or disassemble complex mechanical systems.
- Interpret engineering sketches, specifications, or drawings.
- Calculate required capacities for equipment of proposed system to obtain specified performance and submit data to engineering personnel for approval.
- Review project instructions and blueprints to ascertain test specifications, procedures, and objectives, and test nature of technical problems such as redesign.
- Provide technical support to other employees regarding mechanical design, fabrication, testing, or documentation.
- Test machines, components, materials, or products to determine characteristics such as performance, strength, or response to stress.
- Draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet or wood shops.
- Analyze test results in relation to design or rated specifications and test objectives, and modify or adjust equipment to meet specifications.
- Record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods.
- Prepare specifications, designs, or sketches for machines, components, or systems related to the generation, transmission, or use of mechanical or fluid energy.
- Read dials and meters to determine amperage, voltage, electrical output and input at specific operating temperature to analyze parts performance.
- Design molds, tools, dies, jigs, or fixtures for use in manufacturing processes.
- Review project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing.
- Design specialized or customized equipment, machines, or structures.
- Conduct failure analyses, document results, and recommend corrective actions.
- Set up and conduct tests of complete units and components under operational conditions to investigate proposals for improving equipment performance.
- Assist engineers to design, develop, test, or manufacture industrial machinery, consumer products, or other equipment.
- Prepare layouts of machinery, tools, plants, or equipment.
- Prepare equipment inspection schedules, reliability schedules, work plans, or other records.
- Set up prototype and test apparatus and operate test controlling equipment to observe and record prototype test results.
- Evaluate tool drawing designs by measuring drawing dimensions and comparing with original specifications for form and function using engineering skills.
- Analyze energy requirements and distribution systems to maximize the use of intermittent or inflexible renewable energy sources, such as wind or nuclear.
- Prepare parts sketches and write work orders and purchase requests to be furnished by outside contractors.
- Estimate cost factors including labor and material for purchased and fabricated parts and costs for assembly, testing, or installing.
- Assist mechanical engineers in product testing through activities such as setting up instrumentation for automobile crash tests.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Analyze or estimate production costs, such as labor, equipment, and plant space.
- Discuss changes in design, method of manufacture and assembly, or drafting techniques and procedures with staff and coordinate corrections.
- Monitor, inspect, or test mechanical equipment.
- Devise, fabricate, or assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Assemble or disassemble complex mechanical systems.
- Assemble aircraft cameras, still or motion picture cameras, photographic equipment, or frames, using diagrams, blueprints, bench machines, hand tools, or power tools.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Disassemble equipment to gain access to defect, using hand tools.
- Test equipment performance, focus of lens system, diaphragm alignment, lens mounts, or film transport, using precision gauges.
- Clean and lubricate cameras and polish camera lenses, using cleaning materials and work aids.
- Requisition parts or materials.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Examine cameras, equipment, processed film, or laboratory reports to diagnose malfunction, using work aids and specifications.
- Read and interpret engineering drawings, diagrams, instructions, or specifications to determine needed repairs, fabrication method, and operation sequence.
- Measure parts to verify specified dimensions or settings, such as camera shutter speed or light meter reading accuracy, using measuring instruments.
- Fabricate or modify defective electronic, electrical, or mechanical components, using bench lathe, milling machine, shaper, grinder, or precision hand tools, according to specifications.
- Install electrical assemblies and wiring in aircraft camera housings and memory cards or film in cameras, following blueprints and using hand tools and soldering equipment.
- Record test data and document fabrication techniques on reports.
- Lay out reference points and dimensions on parts or metal stock to be machined, using precision measuring instruments.
- Recommend design changes or upgrades of microfilming, film-developing, or photographic equipment.
- Assemble aircraft cameras, still or motion picture cameras, photographic equipment, or frames, using diagrams, blueprints, bench machines, hand tools, or power tools.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Transport metal ingots to storage areas, using forklifts.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Add metal to molds to compensate for shrinkage.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Disassemble and assemble machines, according to specifications and using hand and power tools.
- Fill machines with products, ingredients, money, and other supplies.
- Inspect machines and meters to determine causes of malfunctions and fix minor problems such as jammed bills or stuck products.
- Test machines to determine proper functioning.
- Replace malfunctioning parts, such as worn magnetic heads on automatic teller machine (ATM) card readers.
- Maintain records of machine maintenance and repair.
- Clean and oil machine parts.
- Order parts needed for machine repairs.
- Adjust and repair coin, vending, or amusement machines and meters and replace defective mechanical and electrical parts, using hand tools, soldering irons, and diagrams.
- Record transaction information on forms or logs, and notify designated personnel of discrepancies.
- Keep records of merchandise distributed and money collected.
- Collect coins and bills from machines, prepare invoices, and settle accounts with concessionaires.
- Make service calls to maintain and repair machines.
- Adjust machine pressure gauges and thermostats.
- Contact other repair personnel or make arrangements for the removal of machines in cases where major repairs are required.
- Transport machines to installation sites.
- Refer to manuals and wiring diagrams to gather information needed to repair machines.
- Install machines, making the necessary water and electrical connections in compliance with codes.
- Disassemble and assemble machines, according to specifications and using hand and power tools.
