- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 3 | 4 | 2 | 51-9197.00 | Tire Builders |
| 3 | 4 | 2 | 51-5113.00 | Print Binding and Finishing Workers |
| 3 | 3 | 3 | 51-9071.06 | Gem and Diamond Workers |
| 3 | 3 | 3 | 51-9071.00 | Jewelers and Precious Stone and Metal Workers |
| 2 | 3 | 2 | 51-9195.03 | Stone Cutters and Carvers, Manufacturing |
| 2 | 3 | 2 | 51-7011.00 | Cabinetmakers and Bench Carpenters |
| 2 | 3 | 2 | 49-9011.00 | Mechanical Door Repairers 
|
| 2 | 2 | 3 | 51-4061.00 | Model Makers, Metal and Plastic |
| 2 | 2 | 2 | 51-4032.00 | Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
| 2 | 2 | 3 | 51-4111.00 | Tool and Die Makers |
| 2 | 2 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
| 1 | 4 | 2 | 51-6041.00 | Shoe and Leather Workers and Repairers |
| 1 | 3 | 2 | 51-9194.00 | Etchers and Engravers |
| 1 | 2 | 2 | 51-2021.00 | Coil Winders, Tapers, and Finishers |
| 1 | 2 | 2 | 51-6051.00 | Sewers, Hand |
| 1 | 2 | 2 | 49-9094.00 | Locksmiths and Safe Repairers |
| 1 | 2 | 3 | 49-2093.00 | Electrical and Electronics Installers and Repairers, Transportation Equipment
|
| 1 | 2 | 2 | 49-9045.00 | Refractory Materials Repairers, Except Brickmasons |
| 1 | 2 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
| 1 | 2 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 1 | 2 | 3 | 49-9021.00 | Heating, Air Conditioning, and Refrigeration Mechanics and Installers
|
| 1 | 2 | 2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
| 1 | 2 | 3 | 49-3011.00 | Aircraft Mechanics and Service Technicians |
| 1 | 2 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 3 | 49-2096.00 | Electronic Equipment Installers and Repairers, Motor Vehicles |
| 1 | 1 | 2 | 51-2031.00 | Engine and Other Machine Assemblers |
| 1 | 1 | 2 | 51-4071.00 | Foundry Mold and Coremakers |
| 1 | 1 | 2 | 51-2023.00 | Electromechanical Equipment Assemblers
|
| 1 | 1 | 3 | 51-9082.00 | Medical Appliance Technicians |
| 1 | 1 | 2 | 51-9196.00 | Paper Goods Machine Setters, Operators, and Tenders |
| 1 | 1 | 3 | 49-2098.00 | Security and Fire Alarm Systems Installers |
| 1 | 1 | 2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers
|
| 1 | 1 | 2 | 53-7062.04 | Recycling and Reclamation Workers
|
| 1 | 1 | 2 | 51-9195.04 | Glass Blowers, Molders, Benders, and Finishers |
| 1 | 1 | 2 | 51-6091.00 | Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers |
| 1 | 1 | 3 | 51-8013.04 | Hydroelectric Plant Technicians |
| 1 | 1 | 2 | 49-9044.00 | Millwrights |
| 1 | 1 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
| 1 | 1 | 3 | 49-9092.00 | Commercial Divers
|
| 1 | 1 | 3 | 51-5111.00 | Prepress Technicians and Workers |
| 1 | 1 | 2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 2 | 51-9151.00 | Photographic Process Workers and Processing Machine Operators |
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Roll camelbacks onto casings by hand, and cut camelbacks, using knives.
- Cut plies at splice points, and press ends together to form continuous bands.
- Trim excess rubber and imperfections during retreading processes.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Fill cuts and holes in tires, using hot rubber.
- Place tires into molds for new tread.
- Fit inner tubes and final layers of rubber onto tires.
- Buff tires according to specifications for width and undertread depth.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Start rollers that bond tread and plies as drums revolve.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Measure tires to determine mold size requirements.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Activate bead setters that press prefabricated beads onto plies.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Clean and paint completed tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Position rollers that turn ply edges under and over beads, or use steel rods to turn ply edges.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Roll camelbacks onto casings by hand, and cut camelbacks, using knives.
- Cut plies at splice points, and press ends together to form continuous bands.
- Trim excess rubber and imperfections during retreading processes.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Maintain records, such as daily production records, using specified forms.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Apply color to edges of signatures using brushes, pads, or atomizers.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Split gems along pre-marked lines to remove imperfections, using blades and jewelers' hammers.
- Regulate the speed of revolutions and reciprocating actions of drilling mechanisms.
- Regrind drill points, and advance drill cutting points according to specifications for channel depths and shapes.
- Examine gems during processing to ensure accuracy of angles and positions of cuts or bores, using magnifying glasses, loupes, or shadowgraphs.
- Assign polish, symmetry, and clarity grades to stones, according to established grading systems.
- Estimate wholesale and retail value of gems, following pricing guides, market fluctuations, and other relevant economic factors.
- Examine gem surfaces and internal structures, using polariscopes, refractometers, microscopes, and other optical instruments, to differentiate between stones, to identify rare specimens, or to detect flaws, defects, or peculiarities affecting gem values.
- Identify and document stones' clarity characteristics, using plot diagrams.
- Advise customers and others on the best use of gems to create attractive jewelry items.
- Examine diamonds or gems to ascertain the shape, cut, and width of cut stones, or to select the cuts that will result in the biggest, best quality stones.
- Immerse stones in prescribed chemical solutions to determine specific gravities and key properties of gemstones or substitutes.
- Hold stones, gems, dies, or styluses against rotating plates, wheels, saws, or slitters to cut, shape, slit, grind, or polish them.
- Sort rough diamonds into categories based on shape, size, color, and quality.
- Secure gems or diamonds in holders, chucks, dops, lapidary sticks, or blocks for cutting, polishing, grinding, drilling, or shaping.
- Locate and mark drilling or cutting positions on stones or dies, using diamond chips and power hand tools.
- Place stones in clamps on polishing machines and polish facets of stones, using felt-covered or canvas-covered polishing wheels and polishing compounds such as tripoli and rouge.
- Lap girdles on rough diamonds, using diamond girdling lathes.
- Measure sizes of stones' bore holes and cuts to ensure adherence to specifications, using precision measuring instruments.
- Select shaping wheels for tasks, and mix and apply abrasives, bort, or polishing compounds.
- Replace, true, and sharpen blades, drills, and plates.
- Secure stones in metal mountings, using solder.
- Dismantle lapping, boring, cutting, polishing, and shaping equipment and machinery to clean and lubricate it.
- Split gems along pre-marked lines to remove imperfections, using blades and jewelers' hammers.
- Regulate the speed of revolutions and reciprocating actions of drilling mechanisms.
- Regrind drill points, and advance drill cutting points according to specifications for channel depths and shapes.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Position stones and metal pieces, and set, mount, and secure items in place, using setting and hand tools.
- Smooth soldered joints and rough spots, using hand files and emery paper, and polish smoothed areas with polishing wheels or buffing wire.
- Create jewelry from materials such as gold, silver, platinum, and precious or semiprecious stones.
- Make repairs, such as enlarging or reducing ring sizes, soldering pieces of jewelry together, and replacing broken clasps and mountings.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Select and acquire metals and gems for designs.
- Compute costs of labor and materials to determine production costs of products and articles.
- Examine assembled or finished products to ensure conformance to specifications, using magnifying glasses or precision measuring instruments.
- Construct preliminary models of wax, metal, clay, or plaster, and form sample castings in molds.
- Pour molten metal alloys or other materials into molds to cast models of jewelry.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Soften metal to be used in designs by heating it with a gas torch and shape it, using hammers and dies.
- Determine appraised values of diamonds and other gemstones based on price guides, market fluctuations, and stone grades and rarity.
- Grade stones based on their color, perfection, and quality of cut.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Write or modify design specifications such as the metal contents and weights of items.
- Create new jewelry designs and modify existing designs, using computers as necessary.
- Buy and sell jewelry, or serve as agents between buyers and sellers.
- Record the weights and processing times of finished pieces.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Design and fabricate molds, models, and machine accessories, and modify hand tools used to cast metal and jewelry pieces.
- Research and analyze reference materials, and consult with interested parties to develop new products or modify existing designs.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Rout out locations where parts are to be joined to items, using routing machines.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
- Move fingers over surfaces of carvings to ensure smoothness of finish.
- Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
- Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use.
- Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
- Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.
- Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.
- Smooth surfaces of carvings, using rubbing stones.
- Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets.
- Dress stone surfaces, using bushhammers.
- Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes.
- Copy drawings on rough clay or plaster models.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Cut timber to the right size, and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Establish the specifications of articles to be constructed or repaired, or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Perform final touch-ups with sandpaper or steel wool.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Estimate the amounts, types, or costs of needed materials.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Draw up detailed specifications and discuss projects with customers.
- Design furniture, using computer-aided drawing programs.
- Apply Masonite, formica, or vinyl surfacing materials.
- Program computers to operate machinery.
- Cut timber to the right size, and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Prepare doors for hardware installation, such as drilling holes to install locks.
- Bore or cut holes in flooring as required for installation, using hand or power tools.
- Cut door stops or angle irons to fit openings.
- Wind large springs with upward motion of arm.
- Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
- Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
- Repair or replace worn or broken door parts, using hand tools.
- Complete required paperwork, such as work orders, according to services performed or required.
- Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
- Collect payment upon job completion.
- Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
- Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
- Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
- Set doors into place or stack hardware sections into openings after rail or track installation.
- Operate lifts, winches, or chain falls to move heavy curtain doors.
- Remove or disassemble defective automatic mechanical door closers, using hand tools.
- Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
- Run low voltage wiring on ceiling surfaces, using insulated staples.
- Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
- Install dock seals, bumpers, or shelters.
- Order replacement springs, sections, or slats.
- Lubricate door closer oil chambers, and pack spindles with leather washers.
- Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
- Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.
- Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
- Prepare doors for hardware installation, such as drilling holes to install locks.
- Bore or cut holes in flooring as required for installation, using hand or power tools.
- Cut door stops or angle irons to fit openings.
- Drill, countersink, and ream holes in parts and assemblies for bolts, screws, and other fasteners, using power tools.
- Cut, shape, and form metal parts, using lathes, power saws, snips, power brakes and shears, files, and mallets.
- Study blueprints, drawings, and sketches to determine material dimensions, required equipment, and operations sequences.
- Inspect and test products to verify conformance to specifications, using precision measuring instruments or circuit testers.
- Set up and operate machines, such as lathes, drill presses, punch presses, or bandsaws, to fabricate prototypes or models.
- Devise and construct tools, dies, molds, jigs, and fixtures, or modify existing tools and equipment.
- Rework or alter component model or parts as required to ensure that products meet standards.
- Grind, file, and sand parts to finished dimensions.
- Program computer numerical control (CNC) machines to fabricate model parts.
- Lay out and mark reference points and dimensions on materials, using measuring instruments and drawing or scribing tools.
- Align, fit, and join parts, using bolts and screws or by welding or gluing.
- Use computer-aided design (CAD) and computer-aided manufacturing (CAM) software or hardware to fabricate model parts.
- Assemble mechanical, electrical, and electronic components into models or prototypes, using hand tools, power tools, and fabricating machines.
- Consult and confer with engineering personnel to discuss developmental problems and to recommend product modifications.
- Record specifications, production operations, and final dimensions of models for use in establishing operating standards and procedures.
- Wire and solder electrical and electronic connections and components.
- Drill, countersink, and ream holes in parts and assemblies for bolts, screws, and other fasteners, using power tools.
- Cut, shape, and form metal parts, using lathes, power saws, snips, power brakes and shears, files, and mallets.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
- Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
- Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
- Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
- Change worn cutting tools, using wrenches.
- Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
- Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
- Observe drilling or boring machine operations to detect any problems.
- Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
- Turn valves and direct flow of coolants or cutting oil over cutting areas.
- Install tools in spindles.
- Perform minor assembly, such as fastening parts with nuts, bolts, or screws, using power tools or hand tools.
- Lay out reference lines and machining locations on work, using layout tools, and applying knowledge of shop math and layout techniques.
- Sharpen cutting tools, using bench grinders.
- Operate tracing attachments to duplicate contours from templates or models.
- Move machine controls to lower tools to workpieces and to engage automatic feeds.
- Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
- Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.
- Set up and operate drill presses to drill and tap holes in parts for assembly.
- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, or dial indicators.
- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, or grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
- Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
- Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools, hand tools, or welders.
- Inspect finished dies for smoothness, contour conformity, and defects.
- Select metals to be used from a range of metals and alloys, based on properties such as hardness or heat tolerance.
- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.
- File, grind, shim, and adjust different parts to properly fit them together.
- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
- Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, or rulers.
- Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
- Design jigs, fixtures, and templates for use as work aids in the fabrication of parts or products.
- Develop and design new tools and dies, using computer-aided design software.
- Set pyrometer controls of heat-treating furnaces and feed or place parts, tools, or assemblies into furnaces to harden.
- Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.
- Set up and operate drill presses to drill and tap holes in parts for assembly.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Drill or punch holes and insert or attach metal rings, handles, and fastening hardware, such as buckles.
- Cut out parts, following patterns or outlines, using knives, shears, scissors, or machine presses.
- Dress and otherwise finish boots or shoes, as by trimming the edges of new soles and heels to the shoe shape.
- Cut, insert, position, and secure paddings, cushioning, or linings, using stitches or glue.
- Dye, soak, polish, paint, stamp, stitch, stain, buff, or engrave leather or other materials to obtain desired effects, decorations, or shapes.
- Construct, decorate, or repair leather products according to specifications, using sewing machines, needles and thread, leather lacing, glue, clamps, hand tools, or rivets.
- Repair and recondition leather products such as trunks, luggage, shoes, saddles, belts, purses, and baseball gloves.
- Align and stitch or glue materials such as fabric, fleece, leather, or wood, to join parts.
- Inspect articles for defects, and remove damaged or worn parts, using hand tools.
- Prepare inserts, heel pads, and lifts from casts of customers' feet.
- Attach insoles to shoe lasts, affix shoe uppers, and apply heels and outsoles.
- Clean and polish shoes.
- Cement, nail, or sew soles and heels to shoes.
- Check the texture, color, and strength of leather to ensure that it is adequate for a particular purpose.
- Shape shoe heels with a knife, and sand them on a buffing wheel for smoothness.
- Place shoes on lasts to remove soles and heels, using knives or pliers.
- Repair or replace soles, heels, and other parts of footwear, using sewing, buffing and other shoe repair machines, materials, and equipment.
- Estimate the costs of requested products or services such as custom footwear or footwear repair, and receive payment from customers.
- Draw patterns, using measurements, designs, plaster casts, or customer specifications, and position or outline patterns on work pieces.
- Nail heel and toe cleats onto shoes.
- Re-sew seams, and replace handles and linings of suitcases or handbags.
- Stretch shoes, dampening parts and inserting and twisting parts, using an adjustable stretcher.
- Read prescriptions or specifications, and take measurements to establish the type of product to be made, using calipers, tape measures, or rules.
- Attach accessories or ornamentation to decorate or protect products.
- Make, modify, and repair orthopedic or therapeutic footwear according to doctors' prescriptions, or modify existing footwear for people with foot problems and special needs.
- Select materials and patterns, and trace patterns onto materials to be cut out.
- Measure customers for fit, and discuss with them the type of footwear to be made, recommending details such as leather quality.
- Drill or punch holes and insert or attach metal rings, handles, and fastening hardware, such as buckles.
- Cut out parts, following patterns or outlines, using knives, shears, scissors, or machine presses.
- Dress and otherwise finish boots or shoes, as by trimming the edges of new soles and heels to the shoe shape.
- Cut, insert, position, and secure paddings, cushioning, or linings, using stitches or glue.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Cut, strip, and bend wire leads at ends of coils, using pliers and wire scrapers.
- Attach, alter, and trim materials such as wire, insulation, and coils, using hand tools.
- Operate or tend wire-coiling machines to wind wire coils used in electrical components such as resistors and transformers, and in electrical equipment and instruments such as bobbins and generators.
- Review work orders and specifications to determine materials needed and types of parts to be processed.
- Select and load materials such as workpieces, objects, and machine parts onto equipment used in coiling processes.
- Record production and operational data on specified forms.
- Stop machines to remove completed components, using hand tools.
- Examine and test wired electrical components such as motors, armatures, and stators, using measuring devices, and record test results.
- Line slots with sheet insulation, and insert coils into slots.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Disassemble and assemble motors, and repair and maintain electrical components and machinery parts, using hand tools.
- Cut, strip, and bend wire leads at ends of coils, using pliers and wire scrapers.
- Attach, alter, and trim materials such as wire, insulation, and coils, using hand tools.
- Draw and cut patterns according to specifications.
- Trim excess threads or edges of parts, using scissors or knives.
- Sew, join, reinforce, or finish parts of articles, such as garments, books, mattresses, toys, and wigs, using needles and thread or other materials.
- Select thread, twine, cord, or yarn to be used, and thread needles.
- Fold, twist, stretch, or drape material, and secure articles in preparation for sewing.
- Smooth seams with heated irons, flat bones, or rubbing sticks.
- Measure and align parts, fasteners, or trimmings, following seams, edges, or markings on parts.
- Use different sewing techniques such as felling, tacking, basting, embroidery, and fagoting.
- Sew buttonholes, or add lace or other trimming.
- Wax thread by drawing it through a ball of wax.
- Tie, knit, weave or knot ribbon, yarn, or decorative materials.
- Soften leather or shoe material with water to prepare it for sewing.
- Attach trimmings and labels to articles with cement, using brushes or cement guns.
- Draw and cut patterns according to specifications.
- Trim excess threads or edges of parts, using scissors or knives.
- Open safe locks by drilling.
- Cut new or duplicate keys, using key cutting machines.
- Disassemble mechanical or electrical locking devices, and repair or replace worn tumblers, springs, and other parts, using hand tools.
- Cut new or duplicate keys, using impressions or code key machines.
- Install door hardware, such as locks and closers.
- Insert new or repaired tumblers into locks to change combinations.
- Set up and maintain master key systems.
- Keep records of company locks and keys.
- Move picklocks in cylinders to open door locks without keys.
- Repair and adjust safes, vault doors, and vault components, using hand tools, lathes, drill presses, and welding and acetylene cutting apparatus.
- Install safes, vault doors, and deposit boxes according to blueprints, using equipment such as power drills, taps, dies, truck cranes, and dollies.
- Install alarm and electronic access systems.
- Unlock cars and other vehicles.
- Remove interior and exterior finishes on safes and vaults, and spray on new finishes.
- Open safe locks by drilling.
- Cut new or duplicate keys, using key cutting machines.
- Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.
- Measure, cut, and install frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
- Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software.
- Reassemble and test equipment after repairs.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
- Splice wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Maintain equipment service records.
- Refer to schematics and manufacturers' specifications that show connections and provide instructions on how to locate problems.
- Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.
- Install new fuses, electrical cables, or power sources as required.
- Confer with customers to determine the nature of malfunctions.
- Install electrical equipment such as air-conditioning, heating, or ignition systems and components such as generator brushes and commutators, using hand tools.
- Repair or rebuild equipment such as starters, generators, distributors, or door controls, using electrician's tools.
- Estimate costs of repairs based on parts and labor requirements.
- Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.
- Measure, cut, and install frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
- Drill holes in furnace walls, bolt overlapping layers of plastic to walls, and hammer surfaces to compress layers into solid sheets.
- Measure furnace walls to determine dimensions and cut required number of sheets from plastic block, using saws.
- Reline or repair ladles and pouring spouts with refractory clay, using trowels.
- Chip slag from linings of ladles or remove linings when beyond repair, using hammers and chisels.
- Mix specified amounts of sand, clay, mortar powder, and water to form refractory clay or mortar, using shovels or mixing machines.
- Tighten locknuts holding refractory stopper assemblies together, spread mortar on jackets to seal sleeve joints, and dry mortar in ovens.
- Dry and bake new linings by placing inverted linings over burners, building fires in ladles, or by using blowtorches.
- Remove worn or damaged plastic block refractory linings of furnaces, using hand tools.
- Fasten stopper heads to rods with metal pins to assemble refractory stoppers used to plug pouring nozzles of steel ladles.
- Climb scaffolding, carrying hoses, and spray surfaces of cupolas with refractory mixtures, using spray equipment.
- Spread mortar on stopper heads and rods, using trowels, and slide brick sleeves over rods to form refractory jackets.
- Dump and tamp clay in molds, using tamping tools.
- Disassemble molds, and cut, chip, and smooth clay structures such as floaters, drawbars, and L-blocks.
- Transfer clay structures to curing ovens, melting tanks, and drawing kilns, using forklifts.
- Install preformed metal scaffolding in interiors of cupolas, using hand tools.
- Install clay structures in melting tanks and drawing kilns to control the flow and temperature of molten glass, using hoists and hand tools.
- Drill holes in furnace walls, bolt overlapping layers of plastic to walls, and hammer surfaces to compress layers into solid sheets.
- Measure furnace walls to determine dimensions and cut required number of sheets from plastic block, using saws.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Pull tables back against stops and depress pedals to advance cutterheads that shape stock ends.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Unload and roll logs from trucks to sawmill decks or to carriages, or move logs in ponds, using pike poles.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
- Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
- Test electrical circuits or components for continuity, using electrical test equipment.
- Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
- Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
- Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
- Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.
- Adjust system controls to settings recommended by manufacturer to balance system.
- Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
- Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
- Repair or replace defective equipment, components, or wiring.
- Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
- Install, connect, or adjust thermostats, humidistats, or timers.
- Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.
- Braze or solder parts to repair defective joints and leaks.
- Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
- Perform mechanical overhauls and refrigerant reclaiming.
- Install expansion and control valves, using acetylene torches and wrenches.
- Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
- Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.
- Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
- Keep records of repairs and replacements made and causes of malfunctions.
- Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
- Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
- Supervise and instruct assistants.
- Lay out reference points for installation of structural and functional components, using measuring instruments.
- Lift and align components into position, using hoist or block and tackle.
- Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.
- Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
- Test pipes, lines, components, and connections for leaks.
- Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
- Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Hammer out bulges or bends in metal workpieces.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Obtain fuel and oil samples and check them for contamination.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Measure the tension of control cables.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Cure bonded structures, using portable or stationary curing equipment.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Determine repair limits for engine hot section parts.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Prepare and paint aircraft surfaces.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Cut metal or other materials, using shears or band saws.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Spray coating in specified patterns according to instructions.
- Clean and maintain equipment, using water hoses and scrapers.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Install gears and holding devices on conveyor equipment.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Cut openings and drill holes for fixtures and equipment, using electric drills and routers.
- Install equipment and accessories, such as stereos, navigation equipment, communication equipment, and security systems.
- Inspect and test electrical or electronic systems to locate and diagnose malfunctions, using visual inspections and testing instruments, such as oscilloscopes and voltmeters.
- Splice wires with knives or cutting pliers, and solder connections to fixtures and equipment.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Run new speaker and electrical cables.
- Confer with customers to determine the nature of malfunctions.
- Remove seats, carpeting, and interiors of doors and add sound-absorbing material in empty spaces, reinstalling interior parts.
- Record results of diagnostic tests.
- Estimate costs of repairs, based on parts and labor charges.
- Replace and clean electrical or electronic components.
- Build fiberglass or wooden enclosures for sound components, and fit them to automobile dimensions.
- Cut openings and drill holes for fixtures and equipment, using electric drills and routers.
- Lay out and drill, ream, tap, or cut parts for assembly.
- Read and interpret assembly blueprints or specifications manuals, and plan assembly or building operations.
- Inspect, operate, and test completed products to verify functioning, machine capabilities, or conformance to customer specifications.
- Position or align components for assembly, manually or using hoists.
- Set and verify parts clearances.
- Verify conformance of parts to stock lists or blueprints, using measuring instruments such as calipers, gauges, or micrometers.
- Fasten or install piping, fixtures, or wiring and electrical components to form assemblies or subassemblies, using hand tools, rivet guns, or welding equipment.
- Remove rough spots and smooth surfaces to fit, trim, or clean parts, using hand tools or power tools.
- Rework, repair, or replace damaged parts or assemblies.
- Assemble systems of gears by aligning and meshing gears in gearboxes.
- Set up and operate metalworking machines, such as milling or grinding machines, to shape or fabricate parts.
- Maintain and lubricate parts or components.
- Lay out and drill, ream, tap, or cut parts for assembly.
- Cut spouts, runner holes, and sprue holes into molds.
- Clean and smooth molds, cores, and core boxes, and repair surface imperfections.
- Sift and pack sand into mold sections, core boxes, and pattern contours, using hand or pneumatic ramming tools.
- Position patterns inside mold sections, and clamp sections together.
- Position cores into lower sections of molds, and reassemble molds for pouring.
- Sprinkle or spray parting agents onto patterns and mold sections to facilitate removal of patterns from molds.
- Form and assemble slab cores around patterns, and position wire in mold sections to reinforce molds, using hand tools and glue.
- Move and position workpieces, such as mold sections, patterns, and bottom boards, using cranes, or signal others to move workpieces.
- Lift upper mold sections from lower sections, and remove molded patterns.
- Tend machines that bond cope and drag together to form completed shell molds.
- Rotate sweep boards around spindles to make symmetrical molds for convex impressions.
- Pour molten metal into molds, manually or with crane ladles.
- Operate ovens or furnaces to bake cores or to melt, skim, and flux metal.
- Cut spouts, runner holes, and sprue holes into molds.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Cut products to specified dimensions, using hand or power cutters.
- Examine completed work to detect defects and verify conformance to work orders, and adjust machinery as necessary to correct production problems.
- Observe operation of various machines to detect and correct machine malfunctions such as improper forming, glue flow, or pasteboard tension.
- Start machines and move controls to regulate tension on pressure rolls, to synchronize speed of machine components, and to adjust temperatures of glue or paraffin.
- Disassemble machines to maintain, repair, or replace broken or worn parts, using hand or power tools.
- Install attachments to machines for gluing, folding, printing, or cutting.
- Place rolls of paper or cardboard on machine feed tracks, and thread paper through gluing, coating, and slitting rollers.
- Monitor finished cartons as they drop from forming machines into rotating hoppers and into gravity feed chutes to prevent jamming.
- Adjust guide assemblies, forming bars, and folding mechanisms according to specifications, using hand tools.
- Measure, space, and set saw blades, cutters, and perforators, according to product specifications.
- Fill glue and paraffin reservoirs, and position rollers to dispense glue onto paperboard.
- Stamp products with information such as dates, using hand stamps or automatic stamping devices.
- Remove finished cores, and stack or place them on conveyors for transfer to other work areas.
- Lift tote boxes of finished cartons, and dump cartons into feed hoppers.
- Load automatic stapling mechanisms.
- Cut products to specified dimensions, using hand or power cutters.
- Drill holes for wiring in wall studs, joists, ceilings, or floors.
- Install, maintain, or repair security systems, alarm devices, or related equipment, following blueprints of electrical layouts and building plans.
- Mount and fasten control panels, door and window contacts, sensors, or video cameras, and attach electrical and telephone wiring to connect components.
- Demonstrate systems for customers and explain details, such as the causes and consequences of false alarms.
- Test and repair circuits and sensors, following wiring and system specifications.
- Feed cables through access holes, roof spaces, or cavity walls to reach fixture outlets, positioning and terminating cables, wires, or strapping.
- Examine systems to locate problems, such as loose connections or broken insulation.
- Test backup batteries, keypad programming, sirens, or other security features to ensure proper functioning or to diagnose malfunctions.
- Inspect installation sites and study work orders, building plans, and installation manuals to determine materials requirements and installation procedures.
- Consult with clients to assess risks and to determine security requirements.
- Mount raceways and conduits and fasten wires to wood framing, using staplers.
- Adjust sensitivity of units, based on room structures and manufacturers' recommendations, using programming keypads.
- Keep informed of new products and developments.
- Order replacement parts.
- Prepare documents, such as invoices or warranties.
- Provide customers with cost estimates for equipment installation.
- Drill holes for wiring in wall studs, joists, ceilings, or floors.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Instruct customers in the installation, repair, or maintenance of products.
- Paint structures as specified, using paint sprayers.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Cut discarded products, such as appliances and automobiles, into small pieces using saws, blow torches, or other hand or power tools.
- Sort materials, such as metals, glass, wood, paper or plastics, into appropriate containers for recycling.
- Clean recycling yard by sweeping, raking, picking up broken glass and loose paper debris, or moving barrels and bins.
- Operate forklifts, pallet jacks, power lifts, or front-end loaders to load bales, bundles, or other heavy items onto trucks for shipping to smelters or other recycled materials processing facilities.
- Sort metals to separate high-grade metals, such as copper, brass, and aluminum, for recycling.
- Clean, inspect, or lubricate recyclable collection equipment or perform routine maintenance or minor repairs on recycling equipment, such as star gears, finger sorters, destoners, belts, and grinders.
- Collect and sort recyclable construction materials, such as concrete, drywall, plastics, or wood, into containers.
- Extract chemicals from discarded appliances, such as air conditioners or refrigerators, using specialized machinery, such as refrigerant recovery equipment.
- Deposit recoverable materials into chutes or place materials on conveyor belts.
- Operate balers to compress recyclable materials into bundles or bales.
- Clean materials, such as metals, according to recycling requirements.
- Record logs of recycled materials or waste chemicals removed from products.
- Operate processing equipment, such as fiber-sorters and grinders, to sort, crush, or grind recyclable materials.
- Collect recyclable materials from curbside for delivery to designated facilities.
- Operate automated refuse or manual recycling collection vehicles.
- Operate shredders to reclaim steel from discarded appliances.
- Dismantle wrecked vehicles by removing parts and labeling and sorting parts into containers.
- Remove copper from circuit boards.
- Cut discarded products, such as appliances and automobiles, into small pieces using saws, blow torches, or other hand or power tools.
- Cut lengths of tubing to specified sizes, using files or cutting wheels.
- Heat glass to pliable stage, using gas flames or ovens and rotating glass to heat it uniformly.
- Inspect, weigh, and measure products to verify conformance to specifications, using instruments such as micrometers, calipers, magnifiers, or rulers.
- Record manufacturing information, such as quantities, sizes, or types of goods produced.
- Place glass into dies or molds of presses and control presses to form products, such as glassware components or optical blanks.
- Spray or swab molds with oil solutions to prevent adhesion of glass.
- Blow tubing into specified shapes to prevent glass from collapsing, using compressed air or own breath, or blow and rotate gathers in molds or on boards to obtain final shapes.
- Operate electric kilns that heat and mold glass sheets to the shape and curve of metal jigs.
- Determine types and quantities of glass required to fabricate products.
- Set up and adjust machine press stroke lengths and pressures and regulate oven temperatures, according to glass types to be processed.
- Shape, bend, or join sections of glass, using paddles, pressing and flattening hand tools, or cork.
- Design and create glass objects, using blowpipes and artisans' hand tools and equipment.
- Place electrodes in tube ends and heat them with glass burners to fuse them into place.
- Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash, or polish glass or glass products.
- Repair broken scrolls by replacing them with new sections of tubing.
- Develop sketches of glass products into blueprint specifications, applying knowledge of glass technology and glass blowing.
- Superimpose bent tubing on asbestos patterns to ensure accuracy.
- Strike necks of finished articles to separate articles from blowpipes.
- Place rubber hoses on ends of tubing and charge tubing with gas.
- Cut lengths of tubing to specified sizes, using files or cutting wheels.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Move controls to activate and adjust extruding and forming machines.
- Record details of machine malfunctions.
- Clean and maintain extruding and forming machines, using hand tools.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Record operational data on tags, and attach tags to machines.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Remove excess, entangled, or completed filaments from machines, using hand tools.
- Wipe finish rollers with cloths and wash finish trays with water when necessary.
- Lower pans inside cabinets to catch molten filaments until flow of polymer through packs has stopped.
- Turn rheostats to obtain specified temperatures in electric furnaces where glass is melted.
- Turn petcocks to adjust the flow of binding fluid to sleeves.
- Pull extruded fiberglass filaments over sleeves where binding solution is applied, and into grooves of graphite shoes that bind filaments into single strands of sliver.
- Pass sliver strands through openings in floors to workers on floors below who wind slivers onto tubes.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Cut, bend, or shape metal for applications in hydroelectric plants, using equipment such as hydraulic benders or pipe threaders.
- Operate high voltage switches or related devices in hydropower stations.
- Identify or address malfunctions of hydroelectric plant operational equipment, such as generators, transformers, or turbines.
- Inspect water-powered electric generators or auxiliary equipment in hydroelectric plants to verify proper operation or to determine maintenance or repair needs.
- Implement load or switching orders in hydroelectric plants, in accordance with specifications or instructions.
- Start, adjust, or stop generating units, operating valves, gates, or auxiliary equipment in hydroelectric power generating plants.
- Perform preventive or corrective containment or cleanup measures in hydroelectric plants to prevent environmental contamination.
- Maintain or repair hydroelectric plant electrical, mechanical, or electronic equipment, such as motors, transformers, voltage regulators, generators, relays, battery systems, air compressors, sump pumps, gates, or valves.
- Operate hydroelectric plant equipment, such as turbines, pumps, valves, gates, fans, electric control boards, or battery banks.
- Communicate status of hydroelectric operating equipment to dispatchers or supervisors.
- Monitor hydroelectric power plant equipment operation and performance, adjusting to performance specifications, as necessary.
- Take readings and record data, such as water levels, temperatures, or flow rates.
- Install or calibrate electrical or mechanical equipment, such as motors, engines, switchboards, relays, switch gears, meters, pumps, hydraulics, or flood channels.
- Lift and move loads, using cranes, hoists, and rigging, to install or repair hydroelectric system equipment or infrastructure.
- Maintain logs, reports, work requests, or other records of work performed in hydroelectric plants.
- Change oil, hydraulic fluid, or other lubricants to maintain condition of hydroelectric plant equipment.
- Perform tunnel or field inspections of hydroelectric plant facilities or resources.
- Connect metal parts or components in hydroelectric plants by welding, soldering, riveting, tapping, bolting, bonding, or screwing.
- Erect scaffolds, platforms, or hoisting frames to access hydroelectric plant machinery or infrastructure for repair or replacement.
- Splice or terminate cables or electrical wiring in hydroelectric plants.
- Test and repair or replace electrical equipment, such as circuit breakers, station batteries, cable trays, conduits, or control devices.
- Cut, bend, or shape metal for applications in hydroelectric plants, using equipment such as hydraulic benders or pipe threaders.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
- Assemble and install equipment, using hand tools and power tools.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
- Weld, repair, and fabricate equipment or machinery.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Install robot and modify its program, using teach pendant.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Scribe or separate wafers into dice.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Connect reactor to computer, using hand tools and power tools.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Scribe or separate wafers into dice.
- Drill holes in rock and rig explosives for underwater demolitions.
- Take appropriate safety precautions, such as monitoring dive lengths and depths and registering with authorities before diving expeditions begin.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Descend into water with the aid of diver helpers, using scuba gear or diving suits.
- Obtain information about diving tasks and environmental conditions.
- Supervise or train other divers, including hobby divers.
- Inspect the condition of underwater steel or wood structures.
- Inspect and test docks, ships, buoyage systems, plant intakes or outflows, or underwater pipelines, cables, or sewers, using closed circuit television, still photography, and testing equipment.
- Repair ships, bridge foundations, or other structures below the water line, using caulk, bolts, and hand tools.
- Recover objects by placing rigging around sunken objects, hooking rigging to crane lines, and operating winches, derricks, or cranes to raise objects.
- Operate underwater video, sonar, recording, or related equipment to investigate underwater structures or marine life.
- Take test samples or photographs to assess the condition of vessels or structures.
- Cut and weld steel, using underwater welding equipment, jigs, and supports.
- Install, inspect, clean, or repair piping or valves.
- Carry out non-destructive testing, such as tests for cracks on the legs of oil rigs at sea.
- Install pilings or footings for piers or bridges.
- Salvage wrecked ships or their cargo, using pneumatic power velocity and hydraulic tools and explosive charges, when necessary.
- Remove obstructions from strainers or marine railway or launching ways, using pneumatic or power hand tools.
- Set or guide placement of pilings or sandbags to provide support for structures, such as docks, bridges, cofferdams, or platforms.
- Perform activities related to underwater search and rescue, salvage, recovery, or cleanup operations.
- Perform offshore oil or gas exploration or extraction duties, such as conducting underwater surveys or repairing and maintaining drilling rigs or platforms.
- Remove rubbish or pollution from the sea.
- Set up dive sites for recreational instruction.
- Cultivate or harvest marine species or perform routine work on fish farms.
- Drill holes in rock and rig explosives for underwater demolitions.
- Punch holes in light-sensitive plates and insert pins in holes to prepare plates for contact with positive or negative film.
- Generate prepress proofs in digital or other format to approximate the appearance of the final printed piece.
- Proofread and perform quality control of text and images.
- Enter, position, and alter text size, using computers, to make up and arrange pages so that printed materials can be produced.
- Perform "preflight" check of required font, graphic, text and image files to ensure completeness prior to delivery to printer.
- Operate and maintain laser plate-making equipment that converts electronic data to plates without the use of film.
- Enter, store, and retrieve information on computer-aided equipment.
- Maintain, adjust, and clean equipment, and perform minor repairs.
- Operate presses to print proofs of plates, monitoring printing quality to ensure that it is adequate.
- Select proper types of plates according to press run lengths.
- Examine finished plates to detect flaws, verify conformity with master plates, and measure dot sizes and centers, using light boxes and microscopes.
- Examine unexposed photographic plates to detect flaws or foreign particles prior to printing.
- Examine photographic images for obvious imperfections prior to plate making.
- Arrange and mount typeset material and illustrations into paste-ups for printing reproduction, based on artists' or editors' layouts.
- Operate and maintain a variety of cameras and equipment, such as process, line, halftone, and color separation cameras, enlargers, electronic scanners, and contact equipment.
- Scale copy for reductions and enlargements, using proportion wheels.
- Perform tests to determine lengths of exposures, by exposing plates, scanning line copy, and comparing exposures to tone range scales.
- Mix solutions such as developing solutions and colored coating solutions.
- Analyze originals to evaluate color density, gradation highlights, middle tones, and shadows, using densitometers and knowledge of light and color.
- Activate scanners to produce positive or negative films for the black-and-white, cyan, yellow, and magenta separations from each original copy.
- Set scanners to specific color densities, sizes, screen rulings, and exposure adjustments, using scanner keyboards or computers.
- Perform minor deletions, additions, or corrections to completed plates, on or off printing presses, using tusche, printing ink, erasers, and needles.
- Inspect developed film for specified results and quality, using magnifying glasses and scopes, forwarding acceptable negatives or positives to other workers or to customers.
- Perform close alignment or registration of double and single flats to sensitized plates prior to exposure to produce composite images.
- Mount negatives and plates in cameras, set exposure controls, and expose plates to light through negatives to transfer images onto plates.
- Punch holes in light-sensitive plates and insert pins in holes to prepare plates for contact with positive or negative film.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Start machines to verify setups, and make any necessary adjustments.
- Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
- Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Direct workers on cutting teams.
- Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Tighten pulleys or add abrasives to maintain cutting speeds.
- Wash stones, using water hoses.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Start machines, monitor their operations, and record operational data.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Load workpieces, plastic material, or chemical solutions into machines.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Mark identifying data on workpieces.
- Clean work area.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Operate forklifts to deliver materials.
- Lubricate workpieces with oil.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Thread ends of metal coils from reels through slitters and secure ends on recoilers.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Replace defective blades or wheels, using hand tools.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Preheat workpieces, using heating furnaces or hand torches.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Hone cutters with oilstones to remove nicks.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Splice broken or separated film and mount film on reels.
- Select digital images for printing, specify number of images to be printed, and direct to printer, using computer software.
- Create prints according to customer specifications and laboratory protocols.
- Produce color or black-and-white photographs, negatives, or slides, applying standard photographic reproduction techniques and procedures.
- Set or adjust machine controls, according to specifications, type of operation, or material requirements.
- Review computer-processed digital images for quality.
- Operate scanners or related computer equipment to digitize negatives, photographic prints, or other images.
- Fill tanks of processing machines with solutions such as developer, dyes, stop-baths, fixers, bleaches, or washes.
- Measure and mix chemicals to prepare solutions for processing, according to formulas.
- Load digital images onto computers directly from cameras or from storage devices, such as flash memory cards or universal serial bus (USB) devices.
- Operate special equipment to perform tasks such as transferring film to videotape or producing photographic enlargements.
- Examine developed prints for defects, such as broken lines, spots, or blurs.
- Read work orders to determine required processes, techniques, materials, or equipment.
- Load circuit boards, racks or rolls of film, negatives, or printing paper into processing or printing machines.
- Insert processed negatives and prints into envelopes for delivery to customers.
- Reprint originals for enlargement or in sections to be pieced together.
- Clean or maintain photoprocessing or darkroom equipment, using ultrasonic equipment or cleaning and rinsing solutions.
- Monitor equipment operation to detect malfunctions.
- Maintain records, such as quantities or types of processing completed, materials used, or customer charges.
- Operate machines to prepare circuit boards and to expose, develop, etch, fix, wash, dry, or print film or plates.
- Immerse film, negatives, paper, or prints in developing solutions, fixing solutions, and water to complete photographic development processes.
- Examine quality of film fades or dissolves for potential color corrections, using color analyzers.
- Thread filmstrips through densitometers or sensitometers and expose film to light to determine density of film, necessary color corrections, or light sensitivity.
- Examine drawings, negatives, or photographic prints to determine coloring, shading, accenting, or other changes required for retouching or restoration.
- Place sensitized paper in frames of projection printers, photostats, or other reproduction machines.
- Upload digital images onto Web sites for customers.
- Dry prints or negatives using sponges, squeegees, mechanical air dryers, or drying cabinets.
- Produce timed prints with separate densities or color settings for each scene of a production.
- Set automatic timers, lens openings, and printer carriages to specified focus and exposure times and start exposure to duplicate originals, photographs, or negatives.
- Apply paint, using airbrushes, pens, artists' brushes, cotton swabs, or gloved fingers to retouch or enhance negatives or photographs.
- Retouch photographic negatives or original prints to correct defects.
- Shade negatives or photographs with pencils to smooth facial contours, soften highlights, or conceal blemishes, stray hairs, or wrinkles.
- Splice broken or separated film and mount film on reels.
