- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
9 | 9 | 4 | 17-2199.07 | Photonics Engineers |
5 | 5 | 3 | 17-3029.08 | Photonics Technicians |
4 | 6 | 3 | 17-3023.00 | Electrical and Electronic Engineering Technologists and Technicians |
2 | 3 | 3 | 49-2097.00 | Audiovisual Equipment Installers and Repairers |
2 | 3 | 3 | 17-3027.01 | Automotive Engineering Technicians |
2 | 3 | 3 | 17-3024.00 | Electro-Mechanical and Mechatronics Technologists and Technicians |
2 | 3 | 5 | 17-2199.06 | Microsystems Engineers |
2 | 3 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
2 | 2 | 4 | 17-2072.00 | Electronics Engineers, Except Computer
|
2 | 2 | 4 | 17-2072.01 | Radio Frequency Identification Device Specialists
|
2 | 2 | 2 | 49-9099.01 | Geothermal Technicians |
1 | 6 | 3 | 49-2021.00 | Radio, Cellular, and Tower Equipment Installers and Repairers |
1 | 5 | 3 | 49-2093.00 | Electrical and Electronics Installers and Repairers, Transportation Equipment
|
1 | 5 | 3 | 49-2022.00 | Telecommunications Equipment Installers and Repairers, Except Line Installers
|
1 | 3 | 3 | 49-2096.00 | Electronic Equipment Installers and Repairers, Motor Vehicles |
1 | 3 | 3 | 49-2095.00 | Electrical and Electronics Repairers, Powerhouse, Substation, and Relay |
1 | 3 | 3 | 17-3024.01 | Robotics Technicians |
1 | 2 | 4 | 17-2112.02 | Validation Engineers
|
1 | 2 | 4 | 17-2071.00 | Electrical Engineers |
1 | 2 | 3 | 53-6041.00 | Traffic Technicians |
1 | 2 | 4 | 17-2141.00 | Mechanical Engineers
|
1 | 2 | 4 | 17-2121.00 | Marine Engineers and Naval Architects |
1 | 1 | 4 | 17-2021.00 | Agricultural Engineers
|
1 | 1 | 3 | 49-9064.00 | Watch and Clock Repairers |
1 | 1 | 4 | 17-2061.00 | Computer Hardware Engineers
|
1 | 1 | 2 | 49-3043.00 | Rail Car Repairers |
1 | 1 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
1 | 1 | 4 | 13-1041.01 | Environmental Compliance Inspectors
|
1 | 1 | 2 | 43-4121.00 | Library Assistants, Clerical |
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Design, integrate, or test photonics systems or components.
- Design electro-optical sensing or imaging systems.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Design or redesign optical fibers to minimize energy loss.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Analyze system performance or operational requirements.
- Develop or test photonic prototypes or models.
- Assist in the transition of photonic prototypes to production.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Create or maintain photonic design histories.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Design, integrate, or test photonics systems or components.
- Design electro-optical sensing or imaging systems.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Design or redesign optical fibers to minimize energy loss.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Repair or calibrate products, such as surgical lasers.
- Design, build, or modify fixtures used to assemble parts.
- Splice fibers, using fusion splicing or other techniques.
- Maintain clean working environments, according to clean room standards.
- Compute or record photonic test data.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Assist scientists or engineers in the conduct of photonic experiments.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Monitor mechanical factors, such as turbine load or strain information.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Optimize photonic process parameters by making prototype or production devices.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Develop solar power sources for lasers used in fiber optics.
- Fabricate sensors to be used to control wind turbines.
- Perform laser seam welding, heat treatment, or hard facing operations.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Repair or calibrate products, such as surgical lasers.
- Design, build, or modify fixtures used to assemble parts.
- Splice fibers, using fusion splicing or other techniques.
- Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
- Replace defective components or parts, using hand tools and precision instruments.
- Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools.
- Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers.
- Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations.
- Participate in the development or testing of electrical aspects of new green technologies, such as lighting, optical data storage devices, and energy efficient televisions.
- Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
- Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
- Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.
- Assemble electrical systems or prototypes, using hand tools or measuring instruments.
- Review electrical engineering plans to ensure adherence to design specifications and compliance with applicable electrical codes and standards.
- Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material.
- Maintain system logs or manuals to document testing or operation of equipment.
- Select electronics equipment, components, or systems to meet functional specifications.
- Calculate design specifications or cost, material, and resource estimates, and prepare project schedules and budgets.
- Educate equipment operators on the proper use of equipment.
- Supervise the installation or operation of electronic equipment or systems.
- Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed.
- Integrate software or hardware components, using computer, microprocessor, or control architecture.
- Procure parts and maintain inventory and related documentation.
- Participate in training or continuing education activities to stay abreast of engineering or industry advances.
- Research equipment or component needs, sources, competitive prices, delivery times, or ongoing operational costs.
- Provide user applications or engineering support or recommendations for new or existing equipment with regard to installation, upgrades, or enhancements.
- Specify, coordinate, or conduct quality control or quality assurance programs or procedures.
- Produce electronics drawings or other graphics representing industrial control, instrumentation, sensors, or analog or digital telecommunications networks, using computer-aided design (CAD) software.
- Design or modify engineering schematics for electrical transmission and distribution systems or for electrical installation in residential, commercial, or industrial buildings, using computer-aided design (CAD) software.
- Interpret test information to resolve design-related problems.
- Conduct statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.
- Construct and evaluate electrical components for consumer electronics applications such as fuel cells for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Review, develop, or prepare maintenance standards.
- Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
- Replace defective components or parts, using hand tools and precision instruments.
- Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools.
- Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers.
- Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations.
- Participate in the development or testing of electrical aspects of new green technologies, such as lighting, optical data storage devices, and energy efficient televisions.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Position or mount speakers, and wire speakers to consoles.
- Calibrate and test equipment, and locate circuit and component faults, using hand and power tools and measuring and testing instruments such as resistance meters and oscilloscopes.
- Confer with customers to determine the nature of problems or to explain repairs.
- Instruct customers on the safe and proper use of equipment.
- Make service calls to repair units in customers' homes, or return units to shops for major repairs.
- Read and interpret electronic circuit diagrams, function block diagrams, specifications, engineering drawings, and service manuals.
- Tune or adjust equipment and instruments to obtain optimum visual or auditory reception, according to specifications, manuals, and drawings.
- Keep records of work orders and test and maintenance reports.
- Compute cost estimates for labor and materials.
- Install, service, and repair electronic equipment or instruments such as televisions, radios, and videocassette recorders.
- Disassemble entertainment equipment and repair or replace loose, worn, or defective components and wiring, using hand tools and soldering irons.
- Position or mount speakers, and wire speakers to consoles.
- Install equipment, such as instrumentation, test equipment, engines, or aftermarket products, to ensure proper interfaces.
- Build instrumentation or laboratory test equipment for special purposes.
- Maintain test equipment in operational condition by performing routine maintenance or making minor repairs or adjustments as needed.
- Document test results, using cameras, spreadsheets, documents, or other tools.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Read and interpret blueprints, schematics, work specifications, drawings, or charts.
- Inspect or test parts to determine nature or cause of defects or malfunctions.
- Monitor computer-controlled test equipment, according to written or verbal instructions.
- Analyze test data for automotive systems, subsystems, or component parts.
- Perform or execute manual or automated tests of automotive system or component performance, efficiency, or durability.
- Analyze performance of vehicles or components that have been redesigned to increase fuel efficiency, such as camless or dual-clutch engines or alternative types of air-conditioning systems.
- Improve fuel efficiency by testing vehicles or components that use lighter materials, such as aluminum, magnesium alloy, or plastic.
- Fabricate new or modify existing prototype components or fixtures.
- Order new test equipment, supplies, or replacement parts.
- Recommend product or component design improvements, based on test data or observations.
- Recommend tests or testing conditions in accordance with designs, customer requirements, or industry standards to ensure test validity.
- Test performance of vehicles that use alternative fuels, such as alcohol blends, natural gas, liquefied petroleum gas, biodiesel, nano diesel, or alternative power methods, such as solar energy or hydrogen fuel cells.
- Participate in research or testing of computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Install equipment, such as instrumentation, test equipment, engines, or aftermarket products, to ensure proper interfaces.
- Build instrumentation or laboratory test equipment for special purposes.
- Maintain test equipment in operational condition by performing routine maintenance or making minor repairs or adjustments as needed.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Develop, test, or program new robots.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Inspect parts for surface defects.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Test and analyze thermodynamic systems for renewable energy applications, such as solar or wind, to maximize energy production.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Develop, test, or program new robots.
- Design or develop sensors to reduce the energy or resource requirements to operate appliances, such as washing machines or dishwashing machines.
- Design sensors or switches that require little or no power to operate for environmental monitoring or industrial metering applications.
- Identify, procure, or develop test equipment, instrumentation, or facilities for characterization of microelectromechanical systems (MEMS) applications.
- Create schematics and physical layouts of integrated microelectromechanical systems (MEMS) components or packaged assemblies consistent with process, functional, or package constraints.
- Investigate characteristics such as cost, performance, or process capability of potential microelectromechanical systems (MEMS) device designs, using simulation or modeling software.
- Create or maintain formal engineering documents, such as schematics, bills of materials, components or materials specifications, or packaging requirements.
- Conduct analyses addressing issues such as failure, reliability, or yield improvement.
- Plan or schedule engineering research or development projects involving microelectromechanical systems (MEMS) technology.
- Propose product designs involving microelectromechanical systems (MEMS) technology, considering market data or customer requirements.
- Develop formal documentation for microelectromechanical systems (MEMS) devices, including quality assurance guidance, quality control protocols, process control checklists, data collection, or reporting.
- Communicate operating characteristics or performance experience to other engineers or designers for training or new product development purposes.
- Evaluate materials, fabrication methods, joining methods, surface treatments, or packaging to ensure acceptable processing, performance, cost, sustainability, or availability.
- Refine final microelectromechanical systems (MEMS) design to optimize design for target dimensions, physical tolerances, or processing constraints.
- Conduct harsh environmental testing, accelerated aging, device characterization, or field trials to validate devices, using inspection tools, testing protocols, peripheral instrumentation, or modeling and simulation software.
- Develop or file intellectual property and patent disclosure or application documents related to microelectromechanical systems (MEMS) devices, products, or systems.
- Conduct or oversee the conduct of prototype development or microfabrication activities to ensure compliance to specifications and promote effective production processes.
- Conduct experimental or virtual studies to investigate characteristics and processing principles of potential microelectromechanical systems (MEMS) technology.
- Devise microelectromechanical systems (MEMS) production methods, such as integrated circuit fabrication, lithographic electroform modeling, or micromachining.
- Develop or validate specialized materials characterization procedures, such as thermal withstand, fatigue, notch sensitivity, abrasion, or hardness tests.
- Validate fabrication processes for microelectromechanical systems (MEMS), using statistical process control implementation, virtual process simulations, data mining, or life testing.
- Demonstrate miniaturized systems that contain components, such as microsensors, microactuators, or integrated electronic circuits, fabricated on silicon or silicon carbide wafers.
- Manage new product introduction projects to ensure effective deployment of microelectromechanical systems (MEMS) devices or applications.
- Conduct acceptance tests, vendor-qualification protocols, surveys, audits, corrective-action reviews, or performance monitoring of incoming materials or components to ensure conformance to specifications.
- Develop or implement microelectromechanical systems (MEMS) processing tools, fixtures, gages, dies, molds, or trays.
- Develop customer documentation, such as performance specifications, training manuals, or operating instructions.
- Develop or validate product-specific test protocols, acceptance thresholds, or inspection tools for quality control testing or performance measurement.
- Oversee operation of microelectromechanical systems (MEMS) fabrication or assembly equipment, such as handling, singulation, assembly, wire-bonding, soldering, or package sealing.
- Consider environmental issues when proposing product designs involving microelectromechanical systems (MEMS) technology.
- Design or develop energy products using nanomaterials or nanoprocesses, such as micro-nano machining.
- Design or develop industrial air quality microsystems, such as carbon dioxide fixing devices.
- Research or develop emerging microelectromechanical (MEMS) systems to convert nontraditional energy sources into power, such as ambient energy harvesters that convert environmental vibrations into usable energy.
- Design or develop sensors to reduce the energy or resource requirements to operate appliances, such as washing machines or dishwashing machines.
- Design sensors or switches that require little or no power to operate for environmental monitoring or industrial metering applications.
- Identify, procure, or develop test equipment, instrumentation, or facilities for characterization of microelectromechanical systems (MEMS) applications.
- Repair and operate battery-charging equipment.
- Test battery charges, and replace or recharge batteries as necessary.
- Rewire electrical systems, and repair or replace electrical accessories.
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Lubricate moving parts.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Weld, braze, or solder electrical connections.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Set machinery for proper performance, using computers.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Test conditions, fluid levels, and specific gravities of electrolyte cells, using voltmeters, hydrometers, and thermometers.
- Add water or acid to battery cell solutions to obtain specified concentrations.
- Pour compounds into transformer-case terminal openings to seal out moisture.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Drain and filter transformer oil and refill transformers with oil until coils are submerged.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Inspect batteries for structural defects such as dented cans, damaged carbon rods and terminals, and defective seals.
- Bolt porcelain insulators to wood parts to assemble hot stools.
- Position and level battery cells, anodes, or cathodes, using hoists or leveling jacks, or signal other workers to perform positioning and leveling.
- Clean, rinse, and dry transformer cases, using boiling water, scrapers, solvents, hoses, and cloths.
- Repair and operate battery-charging equipment.
- Test battery charges, and replace or recharge batteries as necessary.
- Rewire electrical systems, and repair or replace electrical accessories.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Determine project material or equipment needs.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Research or develop electronics technologies for use in electric-drive vehicles.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Integrate tags, readers, or software in radio frequency identification device (RFID) designs.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Identify operational requirements for new systems to inform selection of technological solutions.
- Perform systems analysis or programming of radio frequency identification device (RFID) technology.
- Test radio frequency identification device (RFID) software to ensure proper functioning.
- Select appropriate radio frequency identification device (RFID) tags and determine placement locations.
- Perform site analyses to determine system configurations, processes to be impacted, or on-site obstacles to technology implementation.
- Perform acceptance testing on newly installed or updated systems.
- Determine means of integrating radio frequency identification device (RFID) into other applications.
- Provide technical support for radio frequency identification device (RFID) technology.
- Collect data about existing client hardware, software, networking, or key business processes to inform implementation of radio frequency identification device (RFID) technology.
- Test tags or labels to ensure readability.
- Determine usefulness of new radio frequency identification device (RFID) technologies.
- Verify compliance of developed applications with architectural standards and established practices.
- Train users in details of system operation.
- Develop process flows, work instructions, or standard operating procedures for radio frequency identification device (RFID) systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of industry research about new technologies.
- Document equipment or process details of radio frequency identification device (RFID) technology.
- Define and compare possible radio frequency identification device (RFID) solutions to inform selection for specific projects.
- Create simulations or models of radio frequency identification device (RFID) systems to provide information for selection and configuration.
- Analyze radio frequency identification device (RFID)-related supply chain data.
- Integrate tags, readers, or software in radio frequency identification device (RFID) designs.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Monitor and adjust operations of geothermal power plant equipment or systems.
- Prepare and maintain logs, reports, or other documentation of work performed.
- Identify and correct malfunctions of geothermal plant equipment, electrical systems, instrumentation, or controls.
- Collect and record data associated with operating geothermal power plants or well fields.
- Determine whether emergency or auxiliary systems will be needed to keep properties heated or cooled in extreme weather conditions.
- Perform pre- and post-installation pressure, flow, and related tests of vertical and horizontal geothermal loop piping.
- Identify equipment options, such as compressors, and make appropriate selections.
- Adjust power production systems to meet load and distribution demands.
- Calculate heat loss and heat gain factors for residential properties to determine heating and cooling required by installed geothermal systems.
- Install and maintain geothermal plant electrical protection equipment.
- Design and lay out geothermal heat systems according to property characteristics, heating and cooling requirements, piping and equipment requirements, applicable regulations, or other factors.
- Install and maintain geothermal system instrumentation or controls.
- Prepare newly installed geothermal heat systems for operation by flushing, purging, or other actions.
- Weld piping, such as high density polyethylene (HDPE) piping, using techniques such as butt, socket, side-wall, and electro-fusion welding.
- Test water sources for factors, such as flow volume and contaminant presence.
- Install, maintain, or repair ground or water source-coupled heat pumps to heat and cool residential or commercial building air or water.
- Integrate hot water heater systems with geothermal heat exchange systems.
- Determine the type of geothermal loop system most suitable to a specific property and its heating and cooling needs.
- Dig trenches for system piping to appropriate depths and lay piping in trenches.
- Apply coatings or operate systems to mitigate corrosion of geothermal plant equipment or structures.
- Backfill piping trenches to protect pipes from damage.
- Operate equipment, such as excavators, backhoes, rock hammers, trench compactors, pavement saws, grout mixers or pumps, geothermal loop reels, and coil tubing units (CTU).
- Maintain electrical switchgear, process controls, transmitters, gauges, and control equipment in accordance with geothermal plant procedures.
- Maintain, calibrate, or repair plant instrumentation, control, and electronic devices in geothermal plants.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Run appropriate power, ground, or coaxial cables.
- Test operation of tower transmission components, using sweep testing tools or software.
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Replace existing antennas with new antennas as directed.
- Bolt equipment into place, using hand or power tools.
- Install, connect, or test underground or aboveground grounding systems.
- Complete reports related to project status, progress, or other work details, using computer software.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Transport equipment to work sites, using utility trucks and equipment trailers.
- Take site survey photos or photos of work performed, using digital cameras.
- Climb towers to access components, using safety equipment, such as full-body harnesses.
- Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Locate tower sites where work is to be performed, using mapping software.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Mount equipment on transmission towers and in vehicles such as ships or ambulances.
- Test emergency transmitters to ensure their readiness for immediate use.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Repair or rebuild equipment such as starters, generators, distributors, or door controls, using electrician's tools.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.
- Install new fuses, electrical cables, or power sources as required.
- Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software.
- Reassemble and test equipment after repairs.
- Splice wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.
- Maintain equipment service records.
- Refer to schematics and manufacturers' specifications that show connections and provide instructions on how to locate problems.
- Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.
- Confer with customers to determine the nature of malfunctions.
- Install electrical equipment such as air-conditioning, heating, or ignition systems and components such as generator brushes and commutators, using hand tools.
- Estimate costs of repairs based on parts and labor requirements.
- Measure, cut, and install frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.
- Repair or rebuild equipment such as starters, generators, distributors, or door controls, using electrician's tools.
- Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.
- Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.
- Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.
- Install new fuses, electrical cables, or power sources as required.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Remove and replace plug-in circuit equipment.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Place intercept circuits on terminals to handle vacant lines in central office installations.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Remove loose wires and other debris after work is completed.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform database verifications, using computers.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Drive crew trucks to and from work areas.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Designate cables available for use.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Remove and replace plug-in circuit equipment.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Place intercept circuits on terminals to handle vacant lines in central office installations.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Install equipment and accessories, such as stereos, navigation equipment, communication equipment, and security systems.
- Replace and clean electrical or electronic components.
- Inspect and test electrical or electronic systems to locate and diagnose malfunctions, using visual inspections and testing instruments, such as oscilloscopes and voltmeters.
- Cut openings and drill holes for fixtures and equipment, using electric drills and routers.
- Splice wires with knives or cutting pliers, and solder connections to fixtures and equipment.
- Run new speaker and electrical cables.
- Confer with customers to determine the nature of malfunctions.
- Remove seats, carpeting, and interiors of doors and add sound-absorbing material in empty spaces, reinstalling interior parts.
- Record results of diagnostic tests.
- Estimate costs of repairs, based on parts and labor charges.
- Build fiberglass or wooden enclosures for sound components, and fit them to automobile dimensions.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Install equipment and accessories, such as stereos, navigation equipment, communication equipment, and security systems.
- Replace and clean electrical or electronic components.
- Construct, test, maintain, and repair substation relay and control systems.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Inspect and test equipment and circuits to identify malfunctions or defects, using wiring diagrams and testing devices such as ohmmeters, voltmeters, or ammeters.
- Prepare and maintain records detailing tests, repairs, and maintenance.
- Consult manuals, schematics, wiring diagrams, and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning.
- Analyze test data to diagnose malfunctions, to determine performance characteristics of systems, or to evaluate effects of system modifications.
- Notify facility personnel of equipment shutdowns.
- Run signal quality and connectivity tests for individual cables, and record results.
- Maintain inventories of spare parts for all equipment, requisitioning parts as necessary.
- Test insulators and bushings of equipment by inducing voltage across insulation, testing current, and calculating insulation loss.
- Schedule and supervise the construction and testing of special devices and the implementation of unique monitoring or control systems.
- Schedule and supervise splicing or termination of cables in color-code order.
- Test oil in circuit breakers and transformers for dielectric strength, refilling oil periodically.
- Disconnect voltage regulators, bolts, and screws, and connect replacement regulators to high-voltage lines.
- Set forms and pour concrete footings for installation of heavy equipment.
- Construct, test, maintain, and repair substation relay and control systems.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
- Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
- Maintain service records of robotic equipment or automated production systems.
- Modify computer-controlled robot movements.
- Perform preventive or corrective maintenance on robotic systems or components.
- Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
- Attach wires between controllers.
- Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
- Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Train customers or other personnel to install, use, or maintain robots.
- Build or assemble robotic devices or systems.
- Document robotics test procedures and results.
- Program complex robotic systems, such as vision systems.
- Develop robotic path motions to maximize efficiency, safety, and quality.
- Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
- Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
- Inspect installation sites.
- Maintain inventories of robotic production supplies, such as sensors or cables.
- Develop three-dimensional simulations of automation systems.
- Operate robots to perform customized tasks, such as environmental cleanup or explosive detection operations.
- Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
- Assist engineers in the design, configuration, or application of robotic systems.
- Install new robotic systems in stationary positions or on tracks.
- Devise automated lab validation test stations or other test fixtures or equipment.
- Maintain validation test equipment.
- Study product characteristics or customer requirements to determine validation objectives and standards.
- Analyze validation test data to determine whether systems or processes have met validation criteria or to identify root causes of production problems.
- Develop validation master plans, process flow diagrams, test cases, or standard operating procedures.
- Prepare detailed reports or design statements, based on results of validation and qualification tests or reviews of procedures and protocols.
- Conduct validation or qualification tests of new or existing processes, equipment, or software in accordance with internal protocols or external standards.
- Communicate with regulatory agencies regarding compliance documentation or validation results.
- Prepare, maintain, or review validation and compliance documentation, such as engineering change notices, schematics, or protocols.
- Recommend resolution of identified deviations from established product or process standards.
- Design validation study features, such as sampling, testing, or analytical methodologies.
- Prepare validation or performance qualification protocols for new or modified manufacturing processes, systems, or equipment for production of pharmaceuticals, electronics, or other products.
- Create, populate, or maintain databases for tracking validation activities, test results, or validated systems.
- Resolve testing problems by modifying testing methods or revising test objectives and standards.
- Conduct audits of validation or performance qualification processes to ensure compliance with internal or regulatory requirements.
- Draw samples of raw materials, intermediate products, or finished products for validation testing.
- Direct validation activities, such as protocol creation or testing.
- Coordinate the implementation or scheduling of validation testing with affected departments and personnel.
- Participate in internal or external training programs to maintain knowledge of validation principles, industry trends, or novel technologies.
- Validate or characterize sustainable or environmentally friendly products, using electronic testing platforms.
- Assist in training equipment operators or other staff on validation protocols and standard operating procedures.
- Plan or conduct validation testing of alternative energy products, such as synthetic jet fuels or energy storage systems, such as fuel cells.
- Devise automated lab validation test stations or other test fixtures or equipment.
- Maintain validation test equipment.
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for commercial, industrial, or domestic purposes.
- Assist in developing capital project programs for new equipment or major repairs.
- Oversee project production efforts to assure projects are completed on time and within budget.
- Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements.
- Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications.
- Operate computer-assisted engineering or design software or equipment to perform engineering tasks.
- Confer with engineers, customers, or others to discuss existing or potential engineering projects or products.
- Investigate or test vendors' or competitors' products.
- Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational, safety, or environmental standards.
- Investigate customer or public complaints to determine the nature and extent of problems.
- Prepare technical drawings, specifications of electrical systems, or topographical maps to ensure that installation and operations conform to standards and customer requirements.
- Compile data and write reports regarding existing or potential electrical engineering studies or projects.
- Prepare specifications for purchases of materials or equipment.
- Estimate labor, material, or construction costs for budget preparation purposes.
- Plan or implement research methodology or procedures to apply principles of electrical theory to engineering projects.
- Supervise or train project team members, as necessary.
- Develop systems that produce electricity with renewable energy sources, such as wind, solar, or biofuels.
- Develop software to control electrical systems.
- Plan layout of electric power generating plants or distribution lines or stations.
- Integrate electrical systems with renewable energy systems to improve overall efficiency.
- Conduct field surveys or study maps, graphs, diagrams, or other data to identify and correct power system problems.
- Design electrical systems or components that minimize electric energy requirements, such as lighting systems designed to account for natural lighting.
- Collect data relating to commercial or residential development, population, or power system interconnection to determine operating efficiency of electrical systems.
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for commercial, industrial, or domestic purposes.
- Assist in developing capital project programs for new equipment or major repairs.
- Maintain or make minor adjustments or field repairs to equipment used in surveys, including the replacement of parts on traffic data gathering devices.
- Place and secure automatic counters, using power tools, and retrieve counters after counting periods end.
- Study traffic delays by noting times of delays, the numbers of vehicles affected, and vehicle speed through the delay area.
- Interact with the public to answer traffic-related questions, respond to complaints or requests, or discuss traffic control ordinances, plans, policies, or procedures.
- Prepare graphs, charts, diagrams, or other aids to illustrate observations or conclusions.
- Analyze data related to traffic flow, accident rates, or proposed development to determine the most efficient methods to expedite traffic flow.
- Prepare work orders for repair, maintenance, or changes in traffic systems.
- Plan, design, and improve components of traffic control systems to accommodate current or projected traffic and to increase usability and efficiency.
- Compute time settings for traffic signals or speed restrictions, using standard formulas.
- Prepare drawings of proposed signal installations or other control devices, using drafting instruments or computer-automated drafting equipment.
- Study factors affecting traffic conditions, such as lighting or sign and marking visibility, to assess their effectiveness.
- Gather and compile data from hand count sheets, machine count tapes, or radar speed checks and code data for computer input.
- Measure and record the speed of vehicular traffic, using electrical timing devices or radar equipment.
- Lay out pavement markings for striping crews.
- Provide technical supervision regarding traffic control devices to other traffic technicians or laborers.
- Operate counters and record data to assess the volume, type, and movement of vehicular or pedestrian traffic at specified times.
- Review traffic control or barricade plans to issue permits for parades or other special events or for construction work that affects rights of way, providing assistance with plan preparation or revision, as necessary.
- Time stoplights or other delays, using stopwatches.
- Visit development or work sites to determine projects' effect on traffic and the adequacy of traffic control and safety plans or to suggest traffic control measures.
- Establish procedures for street closures or for repair or construction projects.
- Provide traffic information, such as road conditions, to the public.
- Monitor street or utility projects for compliance to traffic control permit conditions.
- Develop plans or long-range strategies for providing adequate parking space.
- Interview motorists about specific intersections or highways to gather road-condition information for use in planning.
- Maintain or make minor adjustments or field repairs to equipment used in surveys, including the replacement of parts on traffic data gathering devices.
- Place and secure automatic counters, using power tools, and retrieve counters after counting periods end.
- Design test control apparatus or equipment or develop procedures for testing products.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Recommend design modifications to eliminate machine or system malfunctions.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Provide feedback to design engineers on customer problems or needs.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Write performance requirements for product development or engineering projects.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Solicit new business.
- Provide technical customer service.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Design test control apparatus or equipment or develop procedures for testing products.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Check, test, and maintain automatic controls and alarm systems.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Procure materials needed to repair marine equipment and machinery.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Analyze data to determine feasibility of product proposals.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Check, test, and maintain automatic controls and alarm systems.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Design sensing, measuring, and recording devices, and other instrumentation used to study plant or animal life.
- Prepare reports, sketches, working drawings, specifications, proposals, and budgets for proposed sites or systems.
- Discuss plans with clients, contractors, consultants, and other engineers so that they can be evaluated and necessary changes made.
- Meet with clients, such as district or regional councils, farmers, and developers, to discuss their needs.
- Provide advice on water quality and issues related to pollution management, river control, and ground and surface water resources.
- Plan and direct construction of rural electric-power distribution systems, and irrigation, drainage, and flood control systems for soil and water conservation.
- Design agricultural machinery components and equipment, using computer-aided design (CAD) technology.
- Test agricultural machinery and equipment to ensure adequate performance.
- Design food processing plants and related mechanical systems.
- Visit sites to observe environmental problems, to consult with contractors, or to monitor construction activities.
- Design structures for crop storage, animal shelter and loading, and animal and crop processing, and supervise their construction.
- Design and supervise environmental and land reclamation projects in agriculture and related industries.
- Conduct educational programs that provide farmers or farm cooperative members with information that can help them improve agricultural productivity.
- Supervise food processing or manufacturing plant operations.
- Design sensing, measuring, and recording devices, and other instrumentation used to study plant or animal life.
- Test and replace batteries and other electronic components.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Oil moving parts of timepieces.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Demagnetize mechanisms, using demagnetizing machines.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Test and replace batteries and other electronic components.
- Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, microprocessors, custom integrated circuits, and printers and disk drives.
- Update knowledge and skills to keep up with rapid advancements in computer technology.
- Confer with engineering staff and consult specifications to evaluate interface between hardware and software and operational and performance requirements of overall system.
- Build, test, and modify product prototypes, using working models or theoretical models constructed with computer simulation.
- Write detailed functional specifications that document the hardware development process and support hardware introduction.
- Test and verify hardware and support peripherals to ensure that they meet specifications and requirements, by recording and analyzing test data.
- Direct technicians, engineering designers or other technical support personnel as needed.
- Provide technical support to designers, marketing and sales departments, suppliers, engineers and other team members throughout the product development and implementation process.
- Select hardware and material, assuring compliance with specifications and product requirements.
- Store, retrieve, and manipulate data for analysis of system capabilities and requirements.
- Analyze user needs and recommend appropriate hardware.
- Evaluate factors such as reporting formats required, cost constraints, and need for security restrictions to determine hardware configuration.
- Provide training and support to system designers and users.
- Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications.
- Specify power supply requirements and configuration, drawing on system performance expectations and design specifications.
- Assemble and modify existing pieces of equipment to meet special needs.
- Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications.
- Recommend purchase of equipment to control dust, temperature, and humidity in area of system installation.
- Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, microprocessors, custom integrated circuits, and printers and disk drives.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Record conditions of cars, and repair and maintenance work performed or to be performed.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Repair or replace defective or worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Remove locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Test units for operability before and after repairs.
- Adjust repaired or replaced units as needed to ensure proper operation.
- Repair, fabricate, and install steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Perform scheduled maintenance, and clean units and components.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Paint car exteriors, interiors, and fixtures.
- Disassemble units such as water pumps, control valves, and compressors so that repairs can be made.
- Measure diameters of axle wheel seats, using micrometers, and mark dimensions on axles so that wheels can be bored to specified dimensions.
- Test electrical systems of cars by operating systems and using testing equipment such as ammeters.
- Replace defective wiring and insulation, and tighten electrical connections, using hand tools.
- Install and repair interior flooring, fixtures, walls, plumbing, steps, and platforms.
- Repair window sash frames, attach weather stripping and channels to frames, and replace window glass, using hand tools.
- Align car sides for installation of car ends and crossties, using width gauges, turnbuckles, and wrenches.
- Repair car upholstery.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Connect reactor to computer, using hand tools and power tools.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Scribe or separate wafers into dice.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Connect reactor to computer, using hand tools and power tools.
- Maintain and repair materials, work sites, and equipment.
- Determine the nature of code violations and actions to be taken, and issue written notices of violation, participating in enforcement hearings, as necessary.
- Prepare, organize, and maintain inspection records.
- Investigate complaints and suspected violations regarding illegal dumping, pollution, pesticides, product quality, or labeling laws.
- Determine which sites and violation reports to investigate, and coordinate compliance and enforcement activities with other government agencies.
- Interview individuals to determine the nature of suspected violations and to obtain evidence of violations.
- Inform individuals and groups of pollution control regulations and inspection findings, and explain how problems can be corrected.
- Verify that hazardous chemicals are handled, stored, and disposed of in accordance with regulations.
- Learn and observe proper safety precautions, rules, regulations, and practices so that unsafe conditions can be recognized and proper safety protocols implemented.
- Monitor follow-up actions in cases where violations were found, and review compliance monitoring reports.
- Examine permits, licenses, applications, and records to ensure compliance with licensing requirements.
- Prepare written, oral, tabular, and graphic reports summarizing requirements and regulations, including enforcement and chain of custody documentation.
- Observe and record field conditions, gathering, interpreting, and reporting data such as flow meter readings and chemical levels.
- Determine sampling locations and methods, and collect water or wastewater samples for analysis, preserving samples with appropriate containers and preservation methods.
- Research and keep informed of pertinent information and developments in areas such as EPA laws and regulations.
- Participate in the development of spill prevention programs and hazardous waste rules and regulations, and recommend corrective actions for hazardous waste problems.
- Inspect waste pretreatment, treatment, and disposal facilities and systems for conformance to federal, state, or local regulations.
- Analyze and implement state, federal or local requirements as necessary to maintain approved pretreatment, pollution prevention, and storm water runoff programs.
- Evaluate label information for accuracy and conformance to regulatory requirements.
- Respond to questions and inquiries, such as those concerning service charges and capacity fees, or refer them to supervisors.
- Research and perform calculations related to landscape allowances, discharge volumes, production-based and alternative limits, and wastewater strength classifications, making recommendations and completing documentation.
- Perform laboratory tests on samples collected, such as analyzing the content of contaminated wastewater.
- Inform health professionals, property owners, and the public about harmful properties and related problems of water pollution and contaminated wastewater.
- Review and evaluate applications for registration of products containing dangerous materials, or for pollution control discharge permits.
- Conduct research on hazardous waste management projects to determine the magnitude of problems and treatment or disposal alternatives and costs.
- Prepare data to calculate sewer service charges and capacity fees.
- Maintain and repair materials, work sites, and equipment.
- Operate and maintain audio-visual equipment.
- Sort books, publications, and other items according to established procedure and return them to shelves, files, or other designated storage areas.
- Open and close library during specified hours and secure library equipment, such as computers and audio-visual equipment.
- Locate library materials for patrons, including books, periodicals, tape cassettes, Braille volumes, and pictures.
- Enter and update patrons' records on computers.
- Answer routine inquiries and refer patrons in need of professional assistance to librarians.
- Manage reserve materials by placing items on reserve for library patrons, checking items in and out of library, and removing out-of-date items.
- Lend, reserve, and collect books, periodicals, videotapes, and other materials at circulation desks and process materials for inter-library loans.
- Instruct patrons on how to use reference sources, card catalogs, and automated information systems.
- Inspect returned books for condition and due-date status and compute any applicable fines.
- Maintain records of items received, stored, issued, and returned and file catalog cards according to system used.
- Perform clerical activities, such as answering phones, sorting mail, filing, typing, word processing, and photocopying and mailing out material.
- Register new patrons and issue borrower identification cards that permit patrons to borrow books and other materials.
- Process new materials including books, audio-visual materials, and computer software.
- Provide assistance to librarians in the maintenance of collections of books, periodicals, magazines, newspapers, and audio-visual and other materials.
- Review records, such as microfilm and issue cards, to identify titles of overdue materials and delinquent borrowers.
- Send out notices and accept fine payments for lost or overdue books.
- Maintain library equipment, such as photocopiers, scanners, and computers, and instruct patrons in proper use of such equipment.
- Schedule, supervise, and train clerical workers, volunteers, student assistants, and other library employees.
- Repair books using mending tape, paste, and brushes or prepare books to be sent to a bindery for repair.
- Take action to deal with disruptive or problem patrons.
- Prepare, store, and retrieve classification and catalog information, lecture notes, or other information related to stored documents, using computers.
- Select substitute titles when requested materials are unavailable, following criteria such as age, education, and interests.
- Prepare library statistics reports.
- Deliver and retrieve items to and from departments by hand or using push carts.
- Assist in the preparation of book displays.
- Classify and catalog items according to content and purpose.
- Operate small branch libraries, under the direction of off-site librarian supervisors.
- Plan or participate in library events and programs, such as story time with children.
- Perform accounting and bookkeeping activities, such as invoicing, maintaining financial records, budgeting, and handling cash.
- Place books in mailing containers, affix address labels, and secure containers with straps for mailing to blind library patrons.
- Design or maintain library web site and online catalogues.
- Acquire books, pamphlets, periodicals, audio-visual materials, and other library supplies by checking prices, figuring costs, and preparing appropriate order forms and facilitating the ordering process by providing such information to others.
- Operate and maintain audio-visual equipment.