- Verify accuracy of transcripts by checking copies against original records of proceedings and accuracy of rulings by checking with judges.
Occupations with related tasks Save Table: XLSX CSV
- Inspect cash on hand, notes receivable and payable, negotiable securities, and canceled checks to confirm records are accurate.
- Examine inventory to verify journal and ledger entries.
- Review taxpayer accounts, and conduct audits on-site, by correspondence, or by summoning taxpayer to office.
- Prepare, analyze, or verify annual reports, financial statements, and other records, using accepted accounting and statistical procedures to assess financial condition and facilitate financial planning.
- Prepare detailed reports on audit findings.
- Report to management about asset utilization and audit results, and recommend changes in operations and financial activities.
- Collect and analyze data to detect deficient controls, duplicated effort, extravagance, fraud, or non-compliance with laws, regulations, and management policies.
- Inspect account books and accounting systems for efficiency, effectiveness, and use of accepted accounting procedures to record transactions.
- Supervise auditing of establishments, and determine scope of investigation required.
- Confer with company officials about financial and regulatory matters.
- Examine and evaluate financial and information systems, recommending controls to ensure system reliability and data integrity.
- Examine records and interview workers to ensure recording of transactions and compliance with laws and regulations.
- Prepare, examine, or analyze accounting records, financial statements, or other financial reports to assess accuracy, completeness, and conformance to reporting and procedural standards.
- Prepare adjusting journal entries.
- Review accounts for discrepancies and reconcile differences.
- Establish tables of accounts and assign entries to proper accounts.
- Analyze business operations, trends, costs, revenues, financial commitments, and obligations to project future revenues and expenses or to provide advice.
- Report to management regarding the finances of establishment.
- Develop, implement, modify, and document recordkeeping and accounting systems, making use of current computer technology.
- Evaluate taxpayer finances to determine tax liability, using knowledge of interest and discount rates, annuities, valuation of stocks and bonds, and amortization valuation of depletable assets.
- Examine whether the organization's objectives are reflected in its management activities, and whether employees understand the objectives.
- Audit payroll and personnel records to determine unemployment insurance premiums, workers' compensation coverage, liabilities, and compliance with tax laws.
- Compute taxes owed and prepare tax returns, ensuring compliance with payment, reporting, or other tax requirements.
- Advise clients in areas such as compensation, employee health care benefits, the design of accounting or data processing systems, or long-range tax or estate plans.
- Represent clients before taxing authorities and provide support during litigation involving financial issues.
- Direct activities of personnel engaged in filing, recording, compiling, and transmitting financial records.
- Conduct pre-implementation audits to determine if systems and programs under development will work as planned.
- Develop, maintain, or analyze budgets, preparing periodic reports that compare budgeted costs to actual costs.
- Process invoices for payment.
- Review data about material assets, net worth, liabilities, capital stock, surplus, income, or expenditures.
- Inspect cash on hand, notes receivable and payable, negotiable securities, and canceled checks to confirm records are accurate.
- Examine inventory to verify journal and ledger entries.
- Review taxpayer accounts, and conduct audits on-site, by correspondence, or by summoning taxpayer to office.
- Prepare, analyze, or verify annual reports, financial statements, and other records, using accepted accounting and statistical procedures to assess financial condition and facilitate financial planning.
- Review commercial vehicle logs, shipping papers, or driver and equipment records to detect any problems or to ensure compliance with regulations.
- Examine carrier operating rules, employee qualification guidelines, or carrier training and testing programs for compliance with regulations or safety standards.
- Inspect vehicles or other equipment for evidence of abuse, damage, or mechanical malfunction.
- Inspect vehicles or equipment to ensure compliance with rules, standards, or regulations.
- Inspect repairs to transportation vehicles or equipment to ensure that repair work was performed properly.
- Identify modifications to engines, fuel systems, emissions control equipment, or other vehicle systems to determine the impact of modifications on inspection procedures or conclusions.
- Perform low-pressure fuel evaluative tests (LPFET) to test for harmful emissions from vehicles without onboard diagnostics (OBD) equipment.
- Conduct remote inspections of motor vehicles, using handheld controllers and remotely directed vehicle inspection devices.
- Prepare reports on investigations or inspections and actions taken.
- Issue notices and recommend corrective actions when infractions or problems are found.
- Compare emissions findings with applicable emissions standards.
- Investigate and make recommendations on carrier requests for waiver of federal standards.
- Conduct visual inspections of emission control equipment and smoke emitted from gasoline or diesel vehicles.
- Conduct vehicle or transportation equipment tests, using diagnostic equipment.
- Identify emissions testing procedures and standards appropriate for the age and technology of vehicles.
- Investigate incidents or violations, such as delays, accidents, and equipment failures.
- Negotiate with authorities, such as local government officials, to eliminate hazards along transportation routes.
- Attach onboard diagnostics (OBD) scanner cables to vehicles to conduct emissions inspections.
- Investigate complaints regarding safety violations.
- Monitor or review output from systems, such as Thermal Imaging Units (TIU) or roadside imaging tools, to identify high-risk commercial motor vehicles for follow-up inspections.
- Evaluate new methods of packaging, testing, shipping, or transporting hazardous materials to ensure adequate public safety protection.
- Review commercial vehicle logs, shipping papers, or driver and equipment records to detect any problems or to ensure compliance with regulations.
- Examine carrier operating rules, employee qualification guidelines, or carrier training and testing programs for compliance with regulations or safety standards.
- Verify and analyze data used in settling claims to ensure that claims are valid and that settlements are made according to company practices and procedures.
- Examine titles to property to determine validity and act as company agent in transactions with property owners.
- Examine claims forms and other records to determine insurance coverage.
- Analyze information gathered by investigation and report findings and recommendations.
- Pay and process claims within designated authority level.
- Investigate, evaluate, and settle claims, applying technical knowledge and human relations skills to effect fair and prompt disposal of cases and to contribute to a reduced loss ratio.
- Review police reports, medical treatment records, medical bills, or physical property damage to determine the extent of liability.
- Investigate and assess damage to property and create or review property damage estimates.
- Interview or correspond with agents and claimants to correct errors or omissions and to investigate questionable claims.
- Interview or correspond with claimants, witnesses, police, physicians, or other relevant parties to determine claim settlement, denial, or review.
- Enter claim payments, reserves and new claims on computer system, inputting concise yet sufficient file documentation.
- Resolve complex, severe exposure claims, using high service oriented file handling.
- Adjust reserves or provide reserve recommendations to ensure that reserve activities are consistent with corporate policies.
- Confer with legal counsel on claims requiring litigation.
- Examine claims investigated by insurance adjusters, further investigating questionable claims to determine whether to authorize payments.
- Maintain claim files, such as records of settled claims and an inventory of claims requiring detailed analysis.
- Refer questionable claims to investigator or claims adjuster for investigation or settlement.
- Collect evidence to support contested claims in court.
- Contact or interview claimants, doctors, medical specialists, or employers to get additional information.
- Present cases and participate in their discussion at claim committee meetings.
- Report overpayments, underpayments, and other irregularities.
- Attend mediations or trials.
- Supervise claims adjusters to ensure that adjusters have followed proper methods.
- Conduct detailed bill reviews to implement sound litigation management and expense control.
- Communicate with reinsurance brokers to obtain information necessary for processing claims.
- Prepare reports to be submitted to company's data processing department.
- Obtain credit information from banks and other credit services.
- Communicate with former associates to verify employment record or to obtain background information regarding persons or businesses applying for credit.
- Negotiate claim settlements or recommend litigation when settlement cannot be negotiated.
- Verify and analyze data used in settling claims to ensure that claims are valid and that settlements are made according to company practices and procedures.
- Examine titles to property to determine validity and act as company agent in transactions with property owners.
- Review information about transfers of property to ensure its accuracy, checking basic information on buyers, sellers, and sales prices and making corrections as necessary.
- Verify legal descriptions of properties by comparing them to county records.
- Compute final estimation of property values, taking into account such factors as depreciation, replacement costs, value comparisons of similar properties, and income potential.
- Prepare written reports that estimate property values, outline methods by which the estimations were made, and meet appraisal standards.
- Inspect new construction and major improvements to existing structures to determine values.
- Collect and analyze relevant data to identify real estate market trends.
- Prepare and maintain current data on each parcel assessed, including maps of boundaries, inventories of land and structures, property characteristics, and any applicable exemptions.
- Explain assessed values to property owners and defend appealed assessments at public hearings.
- Identify the ownership of each piece of taxable property.
- Inspect properties, considering factors such as market value, location, and building or replacement costs to determine appraisal value.
- Complete and maintain assessment rolls that show the assessed values and status of all property in a municipality.
- Explain real and personal property taxes to property owners.
- Conduct regular reviews of property within jurisdictions to determine changes in property due to construction or demolition.
- Establish uniform and equitable systems for assessing all classes and kinds of property.
- Examine income records and operating costs of income properties.
- Evaluate land and neighborhoods where properties are situated, considering locations and trends or impending changes that could influence future values.
- Maintain familiarity with aspects of local real estate markets.
- Search public records for transactions such as sales, leases, and assessments.
- Check building codes and zoning bylaws to determine any effects on the properties being appraised.
- Interview persons familiar with properties and immediate surroundings, such as contractors, home owners, and realtors, to obtain pertinent information.
- Photograph interiors and exteriors of properties to assist in estimating property value, substantiate findings, and complete appraisal reports.
- Obtain county land values and sales information about nearby properties to aid in establishment of property values.
- Examine the type and location of nearby services, such as shopping centers, schools, parks, and other neighborhood features, to evaluate their impact on property values.
- Estimate building replacement costs, using building valuation manuals and professional cost estimators.
- Draw land diagrams to be used in appraisal reports to support findings.
- Testify in court as to the value of a piece of real estate property.
- Calculate tax bills for properties by multiplying assessed values by jurisdiction tax rates.
- Approve applications for property tax exemptions or deductions.
- Analyze trends in sales prices, construction costs, and rents, to assess property values or determine the accuracy of assessments.
- Determine taxability of properties, using methods such as field inspection, structural measurement, calculation, sales analysis, market trend studies, and income and expense analysis.
- Review information about transfers of property to ensure its accuracy, checking basic information on buyers, sellers, and sales prices and making corrections as necessary.
- Verify legal descriptions of properties by comparing them to county records.
- Verify that all firm and regulatory policies and procedures have been documented, implemented, and communicated.
- Evaluate applications, records, or documents to gather information about eligibility or liability issues.
- Issue licenses to individuals meeting standards.
- Warn violators of infractions or penalties.
- Advise licensees or other individuals or groups concerning licensing, permit, or passport regulations.
- Prepare reports of activities, evaluations, recommendations, or decisions.
- Report law or regulation violations to appropriate boards or agencies.
- Confer with or interview officials, technical or professional specialists, or applicants to obtain information or to clarify facts relevant to licensing decisions.
- Collect fees for licenses.
- Administer oral, written, road, or flight tests to license applicants.
- Visit establishments to verify that valid licenses or permits are displayed and that licensing standards are being upheld.
- Score tests and observe equipment operation and control to rate ability of applicants.
- Prepare correspondence to inform concerned parties of licensing decisions or appeals processes.
- Identify compliance issues that require follow-up or investigation.
- Keep informed regarding pending industry changes, trends, or best practices.
- Provide assistance to internal or external auditors in compliance reviews.
- Verify that all firm and regulatory policies and procedures have been documented, implemented, and communicated.
- Evaluate applications, records, or documents to gather information about eligibility or liability issues.
- Issue licenses to individuals meeting standards.
- Identify relevant guidance documents, international standards, or consensus standards.
- Review adverse drug reactions and file all related reports in accordance with regulatory agency guidelines.
- Review product promotional materials, labeling, batch records, specification sheets, or test methods for compliance with applicable regulations and policies.
- Coordinate efforts associated with the preparation of regulatory documents or submissions.
- Communicate with regulatory agencies regarding pre-submission strategies, potential regulatory pathways, compliance test requirements, or clarification and follow-up of submissions under review.
- Prepare or direct the preparation of additional information or responses as requested by regulatory agencies.
- Coordinate, prepare, or review regulatory submissions for domestic or international projects.
- Prepare or maintain technical files as necessary to obtain and sustain product approval.
- Interpret regulatory rules or rule changes and ensure that they are communicated through corporate policies and procedures.
- Determine the types of regulatory submissions or internal documentation that are required in situations such as proposed device changes or labeling changes.
- Coordinate recall or market withdrawal activities as necessary.
- Advise project teams on subjects such as premarket regulatory requirements, export and labeling requirements, or clinical study compliance issues.
- Provide technical review of data or reports to be incorporated into regulatory submissions to assure scientific rigor, accuracy, and clarity of presentation.
- Review clinical protocols to ensure collection of data needed for regulatory submissions.
- Provide pre-, ongoing, and post-inspection follow-up assistance to governmental inspectors.
- Maintain current knowledge base of existing and emerging regulations, standards, or guidance documents.
- Recommend changes to company procedures in response to changes in regulations or standards.
- Participate in internal or external audits.
- Compile and maintain regulatory documentation databases or systems.
- Write or update standard operating procedures, work instructions, or policies.
- Obtain and distribute updated information regarding domestic or international laws, guidelines, or standards.
- Develop or track quality metrics.
- Develop or conduct employee regulatory training.
- Recommend adjudication of product complaints.
- Determine requirements applying to treatment, storage, shipment, or disposal of potentially hazardous production-related waste.
- Direct the collection and preparation of laboratory samples as requested by regulatory agencies.
- Prepare responses to customer requests for information, such as product data, written regulatory affairs statements, surveys, or questionnaires.
- Specialize in regulatory issues related to agriculture, such as the cultivation of green biotechnology crops or the post-market regulation of genetically altered crops.
- Determine regulations or procedures related to the management, collection, reuse, recovery, or recycling of packaging waste.
- Determine the legal implications of the production, supply, or use of ozone-depleting substances or equipment containing such substances.
- Obtain clearances for the use of recycled plastics in product packaging.
- Monitor national or international legislation on ozone-depleting substances or global warming.
- Identify relevant guidance documents, international standards, or consensus standards.
- Review adverse drug reactions and file all related reports in accordance with regulatory agency guidelines.
- Review product promotional materials, labeling, batch records, specification sheets, or test methods for compliance with applicable regulations and policies.
- Check tax forms to verify that names and taxpayer identification numbers are correct, that computations have been performed correctly, or that amounts match those on supporting documentation.
- Conduct independent field audits and investigations of income tax returns to verify information or to amend tax liabilities.
- Send notices to taxpayers when accounts are delinquent.
- Confer with taxpayers or their representatives to discuss the issues, laws, and regulations involved in returns, and to resolve problems with returns.
- Notify taxpayers of any overpayment or underpayment, and either issue a refund or request further payment.
- Maintain records for each case, including contacts, telephone numbers, and actions taken.
- Contact taxpayers by mail or telephone to address discrepancies and to request supporting documentation.
- Answer questions from taxpayers and assist them in completing tax forms.
- Collect taxes from individuals or businesses according to prescribed laws and regulations.
- Determine appropriate methods of debt settlement, such as offers of compromise, wage garnishment, or seizure and sale of property.
- Examine and analyze tax assets and liabilities to determine resolution of delinquent tax problems.
- Impose payment deadlines on delinquent taxpayers and monitor payments to ensure that deadlines are met.
- Direct service of legal documents, such as subpoenas, warrants, notices of assessment, and garnishments.
- Review filed tax returns to determine whether claimed tax credits and deductions are allowed by law.
- Maintain knowledge of tax code changes, and of accounting procedures and theory to properly evaluate financial information.
- Process individual and corporate income tax returns, and sales and excise tax returns.
- Request that the state or federal revenue service prepare a return on a taxpayer's behalf in cases where taxes have not been filed.
- Investigate claims of inability to pay taxes by researching court information for the status of liens, mortgages, or financial statements, or by locating assets through third parties.
- Review selected tax returns to determine the nature and extent of audits to be performed on them.
- Examine accounting systems and records to determine whether accounting methods used were appropriate and in compliance with statutory provisions.
- Participate in informal appeals hearings on contested cases from other agents.
- Prepare briefs and assist in searching and seizing records to prepare charges and documentation for court cases.
- Enter tax return information into computers for processing.
- Secure a taxpayer's agreement to discharge a tax assessment or submit contested determinations to other administrative or judicial conferees for appeals hearings.
- Install systems of recording costs or other financial and budgetary data or provide advice on such systems, based on examination of current financial records.
- Check tax forms to verify that names and taxpayer identification numbers are correct, that computations have been performed correctly, or that amounts match those on supporting documentation.
- Conduct independent field audits and investigations of income tax returns to verify information or to amend tax liabilities.
- Review all regulatory agency submission materials to ensure timeliness, accuracy, comprehensiveness, or compliance with regulatory standards.
- Review materials such as marketing literature or user manuals to ensure that regulatory agency requirements are met.
- Provide responses to regulatory agencies regarding product information or issues.
- Direct the preparation and submission of regulatory agency applications, reports, or correspondence.
- Develop regulatory strategies and implementation plans for the preparation and submission of new products.
- Manage activities such as audits, regulatory agency inspections, or product recalls.
- Formulate or implement regulatory affairs policies and procedures to ensure that regulatory compliance is maintained or enhanced.
- Maintain current knowledge of relevant regulations, including proposed and final rules.
- Communicate regulatory information to multiple departments and ensure that information is interpreted correctly.
- Provide regulatory guidance to departments or development project teams regarding design, development, evaluation, or marketing of products.
- Direct documentation efforts to ensure compliance with domestic and international regulations and standards.
- Monitor emerging trends regarding industry regulations to determine potential impacts on organizational processes.
- Investigate product complaints and prepare documentation and submissions to appropriate regulatory agencies as necessary.
- Represent organizations before domestic or international regulatory agencies on major policy matters or decisions regarding company products.
- Train staff in regulatory policies or procedures.
- Develop and maintain standard operating procedures or local working practices.
- Participate in the development or implementation of clinical trial protocols.
- Implement or monitor complaint processing systems to ensure effective and timely resolution of all complaint investigations.
- Contribute to the development or implementation of business unit strategic and operating plans.
- Establish procedures or systems for publishing document submissions in hardcopy or electronic formats.
- Coordinate internal discoveries and depositions with legal department staff.
- Develop relationships with state or federal environmental regulatory agencies to learn about and analyze the potential impacts of proposed environmental policy regulations.
- Establish regulatory priorities or budgets and allocate resources and workloads.
- Evaluate new software publishing systems and confer with regulatory agencies concerning news or updates on electronic publishing of submissions.
- Monitor regulatory affairs activities to ensure their alignment with corporate sustainability or green initiatives.
- Monitor regulatory affairs trends related to environmental issues.
- Evaluate regulatory affairs aspects that are specifically green, such as the use of toxic substances in packaging, carbon footprinting issues, or green policy implementation.
- Review all regulatory agency submission materials to ensure timeliness, accuracy, comprehensiveness, or compliance with regulatory standards.
- Review materials such as marketing literature or user manuals to ensure that regulatory agency requirements are met.
- Verify that all regulatory policies and procedures have been documented, implemented, and communicated.
- Review communications such as securities sales advertising to ensure there are no violations of standards or regulations.
- Report violations of compliance or regulatory standards to duly authorized enforcement agencies as appropriate or required.
- Identify compliance issues that require follow-up or investigation.
- Discuss emerging compliance issues to ensure that management and employees are informed about compliance reporting systems, policies, and practices.
- File appropriate compliance reports with regulatory agencies.
- Maintain documentation of compliance activities, such as complaints received or investigation outcomes.
- Consult with corporate attorneys as necessary to address difficult legal compliance issues.
- Conduct or direct the internal investigation of compliance issues.
- Provide employee training on compliance related topics, policies, or procedures.
- Serve as a confidential point of contact for employees to communicate with management, seek clarification on issues or dilemmas, or report irregularities.
- Disseminate written policies and procedures related to compliance activities.
- Prepare management reports regarding compliance operations and progress.
- Conduct periodic internal reviews or audits to ensure that compliance procedures are followed.
- Keep informed regarding pending industry changes, trends, or best practices.
- Monitor compliance systems to ensure their effectiveness.
- Direct the development or implementation of policies and procedures related to compliance throughout an organization.
- Advise internal management or business partners on the implementation or operation of compliance programs.
- Design or implement improvements in communication, monitoring, or enforcement of compliance standards.
- Provide assistance to internal or external auditors in compliance reviews.
- Collaborate with human resources departments to ensure the implementation of consistent disciplinary action strategies in cases of compliance standard violations.
- Develop risk management strategies based on assessment of product, compliance, or operational risks.
- Advise technical professionals on the development or use of environmental compliance or reporting tools.
- Develop or implement environmental compliance plans for programs, such as air quality, storm water, wastewater treatment, hazardous waste management, pollution prevention, or solid waste management.
- Conduct environmental audits to ensure adherence to environmental standards.
- Evaluate testing procedures to meet the specifications of environmental monitoring programs.
- Review or modify policies or operating guidelines to comply with changes to environmental standards or regulations.
- Oversee internal reporting systems, such as corporate compliance hotlines.
- Verify that software technology is in place to adequately provide oversight and monitoring in all required areas.
- Direct environmental programs, such as air or water compliance, aboveground or underground storage tanks, spill prevention or control, hazardous waste or materials management, solid waste recycling, medical waste management, indoor air quality, integrated pest management, employee training, or disaster preparedness.
- Verify that all regulatory policies and procedures have been documented, implemented, and communicated.
- Review communications such as securities sales advertising to ensure there are no violations of standards or regulations.
- Review billing for accuracy.
- Review loan agreements to ensure that they are complete and accurate according to policy.
- Meet with applicants to obtain information for loan applications and to answer questions about the process.
- Analyze applicants' financial status, credit, and property evaluations to determine feasibility of granting loans.
- Approve loans within specified limits, and refer loan applications outside those limits to management for approval.
- Explain to customers the different types of loans and credit options that are available, as well as the terms of those services.
- Submit applications to credit analysts for verification and recommendation.
- Review and update credit and loan files.
- Obtain and compile copies of loan applicants' credit histories, corporate financial statements, and other financial information.
- Work with clients to identify their financial goals and to find ways of reaching those goals.
- Handle customer complaints and take appropriate action to resolve them.
- Stay abreast of new types of loans and other financial services and products to better meet customers' needs.
- Market bank products to individuals and firms, promoting bank services that may meet customers' needs.
- Analyze potential loan markets and develop referral networks to locate prospects for loans.
- Compute payment schedules.
- Supervise loan personnel.
- Prepare reports to send to customers whose accounts are delinquent, and forward irreconcilable accounts for collector action.
- Set credit policies, credit lines, procedures and standards in conjunction with senior managers.
- Assist in selection of financial award candidates using electronic databases to certify loan eligibility.
- Authorize or sign mail collection letters.
- Calculate amount of debt and funds available to plan methods of payoff and to estimate time for debt liquidation.
- Confer with underwriters to resolve mortgage application problems.
- Contact applicants or creditors to resolve questions about applications or to assist with completion of paperwork.
- Contact borrowers with delinquent accounts to obtain payment in full or to negotiate repayment plans.
- Counsel clients on personal and family financial problems, such as excessive spending or borrowing of funds.
- Establish payment priorities according to credit terms and interest rates to reduce clients' overall costs.
- Inform individuals and groups about the financial assistance available to college or university students.
- Maintain and review account records, updating and recategorizing them according to status changes.
- Match individuals' needs and eligibility with available financial aid programs to provide informed recommendations.
- Review accounts to determine write-offs for collection agencies.
- Review billing for accuracy.
- Review loan agreements to ensure that they are complete and accurate according to policy.
- Check all load-related documentation for completeness and accuracy.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Inspect loads to ensure that cargo is secure.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Drive trucks with capacities greater than 3 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Read and interpret maps to determine vehicle routes.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Operate trucks equipped with snowplows or sander attachments to maintain roads in winter weather.
- Drive electric or hybrid-electric powered trucks or alternative fuel-powered trucks to transport and deliver products, livestock, or other materials.
- Check all load-related documentation for completeness and accuracy.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Verify accuracy of materials lists.
- Verify customer credit ratings.
- Negotiate prices or terms of sales or service agreements.
- Prepare and submit sales contracts for orders.
- Visit establishments to evaluate needs or to promote product or service sales.
- Maintain customer records, using automated systems.
- Answer customers' questions about products, prices, availability, or credit terms.
- Quote prices, credit terms, or other bid specifications.
- Contact new or existing customers to discuss how specific products or services can meet their needs.
- Emphasize product features, based on analyses of customers' needs and on technical knowledge of product capabilities and limitations.
- Compute customer's installation or production costs and estimate savings from new services, products, or equipment.
- Select or assist customers in selecting products based on customer needs, product specifications, and applicable regulations.
- Prepare sales presentations or proposals to explain product specifications or applications.
- Complete expense reports, sales reports, or other paperwork.
- Verify that delivery schedules meet project deadlines.
- Identify prospective customers, using business directories, leads from existing clients, participation in organizations, or trade show or conference attendance.
- Inform customers of estimated delivery schedules, service contracts, warranties, or other information pertaining to purchased products.
- Collaborate with colleagues to exchange information, such as selling strategies or marketing information.
- Provide customers with ongoing technical support.
- Advise customers on product usage to improve production.
- Study documentation or other information for new scientific or technical products.
- Stock or distribute resources, such as samples or promotional or educational materials.
- Attend sales or trade meetings or read related publications to obtain information about market conditions, business trends, environmental regulations, or industry developments.
- Sell service contracts for technical or scientific products.
- Demonstrate the operation or use of technical or scientific products.
- Provide feedback to product design teams so that products can be tailored to clients' needs.
- Arrange for installation and testing of products or machinery.
- Initiate sales campaigns to meet sales and production expectations.
- Obtain building blueprints or specifications for use by engineering departments in bid preparations.
- Appraise equipment to determine contract terms or trade-in values.
- Consult with engineers regarding technical problems with products.
- Sell technical and scientific products that are environmentally sound or designed for environmental remediation.
- Visit establishments, such as pharmacies, to determine product sales.
- Present information to customers about the energy efficiency or environmental impact of scientific or technical products.
- Inform customers about issues related to responsible use and disposal of products, such as waste reduction or product or byproduct recycling or disposal.
- Research and convey information to customers about tax benefits or government rebates associated with energy-efficient scientific or technical products, such as solar panels.
- Verify accuracy of materials lists.
- Verify customer credit ratings.
- Review company records to determine amount of insurance in force on single risk or group of closely related risks.
- Examine documents to determine degree of risk from factors such as applicant health, financial standing and value, and condition of property.
- Decline excessive risks.
- Write to field representatives, medical personnel, or others to obtain further information, quote rates, or explain company underwriting policies.
- Evaluate possibility of losses due to catastrophe or excessive insurance.
- Decrease value of policy when risk is substandard and specify applicable endorsements or apply rating to ensure safe, profitable distribution of risks, using reference materials.
- Authorize reinsurance of policy when risk is high.
- Review company records to determine amount of insurance in force on single risk or group of closely related risks.
- Check data input or verify totals on forms prepared by others to detect errors in arithmetic, data entry, or procedures.
- Use all appropriate adjustments, deductions, and credits to keep clients' taxes to a minimum.
- Compute taxes owed or overpaid, using adding machines or personal computers, and complete entries on forms, following tax form instructions and tax tables.
- Interview clients to obtain additional information on taxable income and deductible expenses and allowances.
- Review financial records, such as income statements and documentation of expenditures to determine forms needed to prepare tax returns.
- Prepare or assist in preparing simple to complex tax returns for individuals or small businesses.
- Furnish taxpayers with sufficient information and advice to ensure correct tax form completion.
- Consult tax law handbooks or bulletins to determine procedures for preparation of atypical returns.
- Explain federal and state tax laws to individuals and companies.
- Answer questions and provide future tax planning to clients.
- Calculate form preparation fees according to return complexity and processing time required.
- Schedule appointments with clients.
- Check data input or verify totals on forms prepared by others to detect errors in arithmetic, data entry, or procedures.
- Examine maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals.
- Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures.
- Inspect new, repaired, or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards, using checklists, hand tools, and test instruments.
- Approve or deny issuance of certificates of airworthiness.
- Prepare and maintain detailed repair, inspection, investigation, and certification records and reports.
- Examine landing gear, tires, and exteriors of fuselage, wings, and engines for evidence of damage or corrosion and the need for repairs.
- Recommend replacement, repair, or modification of aircraft equipment.
- Start aircraft and observe gauges, meters, and other instruments to detect evidence of malfunctions.
- Examine aircraft access plates and doors for security.
- Recommend changes in rules, policies, standards, and regulations, based on knowledge of operating conditions, aircraft improvements, and other factors.
- Investigate air accidents and complaints to determine causes.
- Analyze training programs and conduct oral and written examinations to ensure the competency of persons operating, installing, and repairing aircraft equipment.
- Conduct flight test programs to test equipment, instruments, and systems under a variety of conditions, using both manual and automatic controls.
- Schedule and coordinate in-flight testing programs with ground crews and air traffic control to ensure availability of ground tracking, equipment monitoring, and related services.
- Observe flight activities of pilots to assess flying skills and to ensure conformance to flight and safety regulations.
- Examine maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals.
- Review civil design, engineering, or construction technical documentation to ensure compliance with applicable government or industrial codes, standards, requirements, or regulations.
- Coordinate or direct development, energy assessment, engineering, or construction activities to ensure that wind project needs and objectives are met.
- Manage wind project costs to stay within budget limits.
- Lead or support negotiations involving tax agreements or abatements, power purchase agreements, land use, or interconnection agreements.
- Create wind energy project plans, including project scope, goals, tasks, resources, schedules, costs, contingencies, or other project information.
- Supervise the work of subcontractors or consultants to ensure quality and conformance to specifications or budgets.
- Develop scope of work for wind project functions, such as design, site assessment, environmental studies, surveying, or field support services.
- Provide verbal or written project status reports to project teams, management, subcontractors, customers, or owners.
- Update schedules, estimates, forecasts, or budgets for wind projects.
- Prepare or assist in the preparation of applications for environmental, building, or other required permits.
- Review or evaluate proposals or bids to make recommendations regarding awarding of contracts.
- Manage site assessments or environmental studies for wind fields.
- Prepare wind project documentation, including diagrams or layouts.
- Prepare requests for proposals (RFPs) for wind project construction or equipment acquisition.
- Provide technical support for the design, construction, or commissioning of wind farm projects.
- Review civil design, engineering, or construction technical documentation to ensure compliance with applicable government or industrial codes, standards, requirements, or regulations.
- Review logs, datasheets, or reports to ensure adequate production levels and safe production environments or to identify abnormalities with power production equipment or processes.
- Manage safety programs at power generation facilities.
- Review biomass operations performance specifications to ensure compliance with regulatory requirements.
- Supervise operations or maintenance employees in the production of power from biomass, such as wood, coal, paper sludge, or other waste or refuse.
- Supervise biomass plant or substation operations, maintenance, repair, or testing activities.
- Conduct field inspections of biomass plants, stations, or substations to ensure normal and safe operating conditions.
- Plan and schedule plant activities, such as wood, waste, or refuse fuel deliveries, ash removal, and regular maintenance.
- Prepare and manage biomass plant budgets.
- Evaluate power production or demand trends to identify opportunities for improved operations.
- Inspect biomass gasification processes, equipment, and facilities for ways to maximize capacity and minimize operating costs.
- Prepare reports on biomass plant operations, status, maintenance, and other information.
- Manage parts and supply inventories for biomass plants.
- Monitor and operate communications systems, such as mobile radios.
- Shut down and restart biomass power plants or equipment in emergency situations or for equipment maintenance, repairs, or replacements.
- Compile and record operational data on forms or in log books.
- Monitor the operating status of biomass plants by observing control system parameters, distributed control systems, switchboard gauges, dials, or other indicators.
- Adjust equipment controls to generate specified amounts of electrical power.
- Test, maintain, or repair electrical power distribution machinery or equipment, using hand tools, power tools, and testing devices.
- Operate controls to start, stop, or regulate biomass-fueled generators, generator units, boilers, engines, or auxiliary systems.
- Review logs, datasheets, or reports to ensure adequate production levels and safe production environments or to identify abnormalities with power production equipment or processes.
- Review contents of written orders to ensure adherence to legal requirements.
- Supervise and coordinate the investigation of criminal cases, offering guidance and expertise to investigators, and ensuring that procedures are conducted in accordance with laws and regulations.
- Explain police operations to subordinates to assist them in performing their job duties.
- Train staff in proper police work procedures.
- Investigate and resolve personnel problems within organization and charges of misconduct against staff.
- Inform personnel of changes in regulations and policies, implications of new or amended laws, and new techniques of police work.
- Maintain logs, prepare reports, and direct the preparation, handling, and maintenance of departmental records.
- Cooperate with court personnel and officials from other law enforcement agencies and testify in court, as necessary.
- Direct collection, preparation, and handling of evidence and personal property of prisoners.
- Monitor and evaluate the job performance of subordinates, and authorize promotions and transfers.
- Conduct raids and order detention of witnesses and suspects for questioning.
- Discipline staff for violation of department rules and regulations.
- Prepare work schedules and assign duties to subordinates.
- Inspect facilities, supplies, vehicles, and equipment to ensure conformance to standards.
- Meet with civic, educational, and community groups to develop community programs and events, and to discuss law enforcement subjects.
- Prepare news releases and respond to police correspondence.
- Requisition and issue equipment and supplies.
- Direct release or transfer of prisoners.
- Prepare budgets and manage expenditures of department funds.
- Develop, implement, and revise departmental policies and procedures.
- Review contents of written orders to ensure adherence to legal requirements.
- Review event bills for accuracy and approve payment.
- Consult with customers to determine objectives and requirements for events, such as meetings, conferences, and conventions.
- Coordinate services for events, such as accommodation and transportation for participants, facilities, catering, signage, displays, special needs requirements, printing and event security.
- Arrange the availability of audio-visual equipment, transportation, displays, and other event needs.
- Confer with staff at a chosen event site to coordinate details.
- Inspect event facilities to ensure that they conform to customer requirements.
- Maintain records of event aspects, including financial details.
- Monitor event activities to ensure compliance with applicable regulations and laws, satisfaction of participants, and resolution of any problems that arise.
- Negotiate contracts with such service providers and suppliers as hotels, convention centers, and speakers.
- Evaluate and select providers of services according to customer requirements.
- Plan and develop programs, agendas, budgets, and services according to customer requirements.
- Hire, train, and supervise volunteers and support staff required for events.
- Conduct post-event evaluations to determine how future events could be improved.
- Direct administrative details, such as financial operations, dissemination of promotional materials, and responses to inquiries.
- Meet with sponsors and organizing committees to plan scope and format of events, to establish and monitor budgets, or to review administrative procedures and event progress.
- Read trade publications, attend seminars, and consult with other meeting professionals to keep abreast of meeting management standards and trends.
- Organize registration of event participants.
- Develop event topics and choose featured speakers.
- Promote conference, convention and trades show services by performing tasks such as meeting with professional and trade associations, and producing brochures and other publications.
- Design and implement efforts to publicize events and promote sponsorships.
- Obtain permits from fire and health departments to erect displays and exhibits and serve food at events.
- Review event bills for accuracy and approve payment.
- Review records or reports for clarity and completeness and maintain records or reports, as required under federal law.
- Inform pilots about nearby planes or potentially hazardous conditions, such as weather, speed and direction of wind, or visibility problems.
- Issue landing and take-off authorizations or instructions.
- Transfer control of departing flights to traffic control centers and accept control of arriving flights.
- Provide flight path changes or directions to emergency landing fields for pilots traveling in bad weather or in emergency situations.
- Alert airport emergency services in cases of emergency or when aircraft are experiencing difficulties.
- Monitor or direct the movement of aircraft within an assigned air space or on the ground at airports to minimize delays and maximize safety.
- Direct pilots to runways when space is available or direct them to maintain a traffic pattern until there is space for them to land.
- Monitor aircraft within a specific airspace, using radar, computer equipment, or visual references.
- Direct ground traffic, including taxiing aircraft, maintenance or baggage vehicles, or airport workers.
- Contact pilots by radio to provide meteorological, navigational, or other information.
- Maintain radio or telephone contact with adjacent control towers, terminal control units, or other area control centers to coordinate aircraft movement.
- Determine the timing or procedures for flight vector changes.
- Initiate or coordinate searches for missing aircraft.
- Provide on-the-job training to new air traffic controllers.
- Check conditions and traffic at different altitudes in response to pilots' requests for altitude changes.
- Relay air traffic information, such as courses, altitudes, or expected arrival times, to control centers.
- Inspect, adjust, or control radio equipment or airport lights.
- Compile information about flights from flight plans, pilot reports, radar, or observations.
- Organize flight plans or traffic management plans to prepare for planes about to enter assigned airspace.
- Complete daily activity reports and keep records of messages from aircraft.
- Conduct pre-flight briefings on weather conditions, suggested routes, altitudes, indications of turbulence, or other flight safety information.
- Analyze factors such as weather reports, fuel requirements, or maps to determine air routes.
- Review records or reports for clarity and completeness and maintain records or reports, as required under federal law.
- Examine incoming or outgoing mail to ensure conformance with regulations.
- Take, receive, or check periodic inmate counts.
- Maintain order, discipline, and security within assigned areas in accordance with relevant rules, regulations, policies, and laws.
- Maintain knowledge of, comply with, and enforce all institutional policies, rules, procedures, and regulations.
- Respond to emergencies, such as escapes.
- Supervise and direct the work of correctional officers to ensure the safe custody, discipline, and welfare of inmates.
- Supervise or perform searches of inmates or their quarters to locate contraband items.
- Monitor behavior of subordinates to ensure alert, courteous, and professional behavior toward inmates, parolees, fellow employees, visitors, and the public.
- Restrain, secure, or control offenders, using chemical agents, firearms, or other weapons of force as necessary.
- Carry injured offenders or employees to safety and provide emergency first aid when necessary.
- Complete administrative paperwork or supervise the preparation or maintenance of records, forms, or reports.
- Supervise activities, such as searches, shakedowns, riot control, or institutional tours.
- Conduct roll calls of correctional officers.
- Instruct employees or provide on-the-job training.
- Resolve problems between inmates.
- Set up employee work schedules.
- Transfer or transport offenders on foot or by driving vehicles, such as trailers, vans, or buses.
- Review offender information to identify issues that require special attention.
- Develop work or security procedures.
- Convey correctional officers' or inmates' complaints to superiors.
- Supervise or provide security for offenders performing tasks, such as construction, maintenance, laundry, food service, or other industrial or agricultural operations.
- Conduct evaluations of employees' performance.
- Rate behavior of inmates, promoting acceptable attitudes and behaviors to those with low ratings.
- Examine incoming or outgoing mail to ensure conformance with regulations.
- Review design drawings or technical documents for completeness, correctness, or appropriateness.
- Assess the nature and level of physical security threats so that the scope of the problem can be determined.
- Budget and schedule security design work.
- Conduct security audits to identify potential vulnerabilities related to physical security or staff safety.
- Design security policies, programs, or practices to ensure adequate security relating to alarm response, access card use, and other security needs.
- Design, implement, or establish requirements for security systems, video surveillance, motion detection, or closed-circuit television systems to ensure proper installation and operation.
- Develop conceptual designs of security systems.
- Develop or review specifications for design or construction of security systems.
- Engineer, install, maintain, or repair security systems, programmable logic controls, or other security-related electronic systems.
- Inspect fire, intruder detection, or other security systems.
- Inspect physical security design features, installations, or programs to ensure compliance with applicable standards or regulations.
- Interview witnesses or suspects to identify persons responsible for security breaches or to establish losses, pursue prosecutions, or obtain restitution.
- Monitor tapes or digital recordings to identify the source of losses.
- Monitor the work of contractors in the design, construction, and startup phases of security systems.
- Outline system security criteria for pre-bid meetings with clients and companies to ensure comprehensiveness and appropriateness for implementation.
- Perform risk analyses so that appropriate countermeasures can be developed.
- Prepare documentation for case reports or court proceedings.
- Prepare, maintain, or update security procedures, security system drawings, or related documentation.
- Provide system design and integration recommendations.
- Recommend improvements in security systems or procedures.
- Respond to emergency situations on an on-call basis.
- Test security measures for final acceptance and implement or provide procedures for ongoing monitoring and evaluation of the measures.
- Train personnel in security procedures or use of security equipment.
- Review design drawings or technical documents for completeness, correctness, or appropriateness.
- Review quality documentation necessary for regulatory submissions and inspections.
- Stop production if serious product defects are present.
- Review and update standard operating procedures or quality assurance manuals.
- Monitor performance of quality control systems to ensure effectiveness and efficiency.
- Analyze quality control test results and provide feedback and interpretation to production management or staff.
- Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.
- Oversee workers including supervisors, inspectors, or laboratory workers engaged in testing activities.
- Direct product testing activities throughout production cycles.
- Instruct staff in quality control and analytical procedures.
- Direct the tracking of defects, test results, or other regularly reported quality control data.
- Participate in the development of product specifications.
- Identify quality problems or areas for improvement and recommend solutions.
- Collect and analyze production samples to evaluate quality.
- Produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends.
- Communicate quality control information to all relevant organizational departments, outside vendors, or contractors.
- Monitor development of new products to help identify possible problems for mass production.
- Identify critical points in the manufacturing process and specify sampling procedures to be used at these points.
- Create and implement inspection and testing criteria or procedures.
- Document testing procedures, methodologies, or criteria.
- Review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control.
- Coordinate the selection and implementation of quality control equipment, such as inspection gauges.
- Generate and maintain quality control operating budgets.
- Instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies.
- Confer with marketing and sales departments to define client requirements and expectations.
- Evaluate new testing and sampling methodologies or technologies to determine usefulness.
- Review and approve quality plans submitted by contractors.
- Audit and inspect subcontractor facilities including external laboratories.
- Review quality documentation necessary for regulatory submissions and inspections.
- Review blueprints and plans for new or remodeled buildings to ensure the structures meet fire safety codes.
- Prepare and maintain reports of investigation results, and records of convicted arsonists and arson suspects.
- Testify in court cases involving fires, suspected arson, and false alarms.
- Package collected pieces of evidence in securely closed containers, such as bags, crates, or boxes, to protect them.
- Conduct inspections and acceptance testing of newly installed fire protection systems.
- Analyze evidence and other information to determine probable cause of fire or explosion.
- Photograph damage and evidence related to causes of fires or explosions to document investigation findings.
- Inspect buildings to locate hazardous conditions and fire code violations, such as accumulations of combustible material, electrical wiring problems, and inadequate or non-functional fire exits.
- Examine fire sites and collect evidence such as glass, metal fragments, charred wood, and accelerant residue for use in determining the cause of a fire.
- Instruct children about the dangers of fire.
- Conduct fire code compliance follow-ups to ensure that corrective actions have been taken in cases where violations were found.
- Inspect properties that store, handle, and use hazardous materials to ensure compliance with laws, codes, and regulations, and issue hazardous materials permits to facilities found in compliance.
- Write detailed reports of fire inspections performed, fire code violations observed, and corrective recommendations offered.
- Identify corrective actions necessary to bring properties into compliance with applicable fire codes, laws, regulations, and standards, and explain these measures to property owners or their representatives.
- Develop or review fire exit plans.
- Inspect and test fire protection or fire detection systems to verify that such systems are installed in accordance with appropriate laws, codes, ordinances, regulations, and standards.
- Coordinate efforts with other organizations, such as law enforcement agencies.
- Attend training classes to maintain current knowledge of fire prevention, safety, and firefighting procedures.
- Teach fire investigation techniques to other firefighter personnel.
- Conduct fire exit drills to monitor and evaluate evacuation procedures.
- Teach public education programs on fire safety and prevention.
- Recommend changes to fire prevention, inspection, and fire code endorsement procedures.
- Subpoena and interview witnesses, property owners, and building occupants to obtain information and sworn testimony.
- Conduct internal investigation to determine negligence and violation of laws and regulations by fire department employees.
- Test sites and materials to establish facts, such as burn patterns and flash points of materials, using test equipment.
- Dust evidence or portions of fire scenes for latent fingerprints.
- Arrange for the replacement of defective fire fighting equipment and for repair of fire alarm and sprinkler systems, making minor repairs such as servicing fire extinguishers when feasible.
- Issue permits for public assemblies.
- Supervise staff, training them, planning their work, and evaluating their performance.
- Develop and coordinate fire prevention programs, such as false alarm billing, fire inspection reporting, and hazardous materials management.
- Review blueprints and plans for new or remodeled buildings to ensure the structures meet fire safety codes.
