- Measure, weigh, or verify levels of rock, gravel, or other excavated material to prevent equipment overloads.
Occupations with related tasks Save Table: XLSX CSV
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Seal outlet valves on tank cars, barges, and trucks.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Determine load weights and check them against lifting capacities to prevent overload.
- Weigh bundles, using floor scales, and record weights for company records.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Inspect crane site conditions to determine ground stability.
- Determine load weights and check them against lifting capacities to prevent overload.
- Weigh bundles, using floor scales, and record weights for company records.
- Examine, measure, or weigh cargo or materials to determine specific handling requirements.
- Maintain or verify records of time, materials, expenditures, or crew activities.
- Enforce safety rules and regulations.
- Interpret transportation or tariff regulations, shipping orders, safety regulations, or company policies and procedures for workers.
- Resolve worker problems or collaborate with employees to assist in problem resolution.
- Confer with customers, supervisors, contractors, or other personnel to exchange information or to resolve problems.
- Plan work assignments and equipment allocations to meet transportation, operations or production goals.
- Explain and demonstrate work tasks to new workers or assign training tasks to experienced workers.
- Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.
- Drive vehicles or operate machines or equipment to complete work assignments or to assist workers.
- Inspect or test materials, stock, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.
- Requisition needed personnel, supplies, equipment, parts, or repair services.
- Recommend and implement measures to improve worker motivation, equipment performance, work methods, or customer services.
- Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.
- Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.
- Monitor field work to ensure proper performance and use of materials.
- Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or disciplinary actions.
- Perform or schedule repairs or preventive maintenance of vehicles or other equipment.
- Compute or estimate cash, payroll, transportation, personnel, or storage requirements.
- Assist workers in tasks, such as loading vehicles.
- Direct workers in transportation or related services, such as pumping, moving, storing, or loading or unloading of materials.
- Plan and establish schedules.
- Examine, measure, or weigh cargo or materials to determine specific handling requirements.
- Maintain or verify records of time, materials, expenditures, or crew activities.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Read draft markings to determine depths of vessels in water.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Prepare and submit reports after completion of freight shipments.
- Inspect shipments to ensure that freight is securely braced and blocked.
- Record details about freight conditions, handling of freight, and any problems encountered.
- Advise crews in techniques of stowing dangerous and heavy cargo.
- Observe loading of freight to ensure that crews comply with procedures.
- Recommend remedial procedures to correct any violations found during inspections.
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.
- Notify workers of any special treatment required for shipments.
- Direct crews to reload freight or to insert additional bracing or packing as necessary.
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.
- Visually inspect cargo for damage upon arrival or discharge.
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.
- Read draft markings to determine depths of vessels in water.
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.
- Compare encoded tapes or computer printouts with original part specifications and blueprints to verify accuracy of instructions.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved.
- Modify existing programs to enhance efficiency.
- Enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers.
- Sort shop orders into groups to maximize materials utilization and minimize machine setup time.
- Prepare geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper.
- Perform preventative maintenance or minor repairs on machines.
- Order tooling for jobs.
- Write instruction sheets and cutter lists for a machine's controller to guide setup and encode numerical control tapes.
- Align and secure pattern film on reference tables of optical programmers, and observe enlarger scope views of printed circuit boards.
- Compare encoded tapes or computer printouts with original part specifications and blueprints to verify accuracy of instructions.
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Review forensic analysts' reports for technical merit.
- Measure and sketch crime scenes to document evidence.
- Collect evidence from crime scenes, storing it in conditions that preserve its integrity.
- Keep records and prepare reports detailing findings, investigative methods, and laboratory techniques.
- Use photographic or video equipment to document evidence or crime scenes.
- Testify in court about investigative or analytical methods or findings.
- Use chemicals or other substances to examine latent fingerprint evidence and compare developed prints to those of known persons in databases.
- Visit morgues, examine scenes of crimes, or contact other sources to obtain evidence or information to be used in investigations.
- Train new technicians or other personnel on forensic science techniques.
- Operate and maintain laboratory equipment and apparatus.
- Collect impressions of dust from surfaces to obtain and identify fingerprints.
- Examine and analyze blood stain patterns at crime scenes.
- Analyze gunshot residue and bullet paths to determine how shootings occurred.
- Confer with ballistics, fingerprinting, handwriting, documents, electronics, medical, chemical, or metallurgical experts concerning evidence and its interpretation.
- Prepare solutions, reagents, or sample formulations needed for laboratory work.
- Examine footwear, tire tracks, or other types of impressions.
- Examine physical evidence, such as hair, biological fluids, fiber, wood, or soil residues to obtain information about its source and composition.
- Reconstruct crime scenes to determine relationships among pieces of evidence.
- Determine types of bullets and specific weapons used in shootings.
- Interpret laboratory findings or test results to identify and classify substances, materials, or other evidence collected at crime scenes.
- Compare objects, such as tools, with impression marks to determine whether a specific object is responsible for a specific mark.
- Identify and quantify drugs or poisons found in biological fluids or tissues, in foods, or at crime scenes.
- Examine firearms to determine mechanical condition and legal status, performing restoration work on damaged firearms to obtain information, such as serial numbers.
- Analyze data from computers or other digital media sources for evidence related to criminal activity.
- Enter data into databases.
- Operate drones to capture aerial footage or photographs of crime scenes for further analysis.
- Review forensic analysts' reports for technical merit.
- Measure and sketch crime scenes to document evidence.
- Stand by wheels when ships are on automatic pilot, and verify accuracy of courses, using magnetic compasses.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Tie barges together into tow units for tugboats to handle, inspecting barges periodically during voyages and disconnecting them when destinations are reached.
- Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
- Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines.
- Read pressure and temperature gauges or displays and record data in engineering logs.
- Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
- Maintain government-issued certifications, as required.
- Examine machinery to verify specified pressures or lubricant flows.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Lower and man lifeboats when emergencies occur.
- Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Load or unload materials, vehicles, or passengers from vessels.
- Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
- Provide engineers with assistance in repairing or adjusting machinery.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Paint or varnish decks, superstructures, lifeboats, or sides of ships.
- Give directions to crew members engaged in cleaning wheelhouses or quarterdecks.
- Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
- Relay specified signals to other ships, using visual signaling devices, such as blinker lights or semaphores.
- Overhaul lifeboats or lifeboat gear and lower or raise lifeboats with winches or falls.
- Stand gangway watches to prevent unauthorized persons from boarding ships while in port.
- Record data in ships' logs, such as weather conditions or distances traveled.
- Clean and polish wood trim, brass, or other metal parts.
- Participate in shore patrols.
- Stand by wheels when ships are on automatic pilot, and verify accuracy of courses, using magnetic compasses.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Perform database verifications, using computers.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Remove loose wires and other debris after work is completed.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Clean and maintain tools, test equipment, and motor vehicles.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Remove and replace plug-in circuit equipment.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Drive crew trucks to and from work areas.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Designate cables available for use.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Perform database verifications, using computers.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Weigh materials or products and record weight or other production data on tags or labels.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between loading, processing, and storage areas.
- Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
- Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
- Turn valves and open chutes to dump, spray, or release materials from dump cars or storage bins into hoppers.
- Weigh materials or products and record weight or other production data on tags or labels.
- Read documentation to confirm the identity of the deceased.
- Clean the crematorium, including tables, floors, and equipment.
- Document divided remains to ensure parts are not misplaced.
- Embalm, dress, or otherwise prepare the deceased for viewing.
- Explain the cremation process to family or friends of the deceased.
- Offer counsel and comfort to bereaved families or friends.
- Pick up and handle human or pet remains in a respectful manner.
- Place corpses into crematory machines to reduce remains to bone fragments using flame, heat, or alkaline hydrolysis.
- Pulverize remaining bone fragments into smaller pieces, using specialized equipment, such as a cremulator or grinder.
- Remove jewelry, watches, or other personal items from the deceased prior to cremation.
- Sweep or vacuum the cremation chamber to retrieve remains for storage in an urn or other container.
- Transport the deceased to a funeral home or crematory using a van, hearse, or other vehicle.
- Read documentation to confirm the identity of the deceased.
- Measure, weigh, and count products and materials.
- Examine and inspect containers, materials, or products to ensure that product quality and packing specifications are met.
- Record product, packaging, and order information on specified forms and records.
- Seal containers or materials, using glues, fasteners, nails, and hand tools.
- Assemble, line, and pad cartons, crates, and containers, using hand tools.
- Obtain, move, and sort products, materials, containers, and orders, using hand tools.
- Mark and label containers, container tags, or products, using marking tools.
- Clean containers, materials, supplies, or work areas, using cleaning solutions and hand tools.
- Remove completed or defective products or materials, placing them on moving equipment, such as conveyors, or in specified areas, such as loading docks.
- Place or pour products or materials into containers, using hand tools and equipment, or fill containers from spouts or chutes.
- Load materials and products into package processing equipment.
- Transport packages to customers' vehicles.
- Measure, weigh, and count products and materials.
- Count and verify tickets and seat reservations and record numbers of passengers boarding and disembarking.
- Secure passengers for transportation by buckling seatbelts or fastening wheelchairs with tie-down straps.
- Provide boarding assistance to elderly, sick, or injured people.
- Respond to passengers' questions, requests, or complaints.
- Determine or facilitate seating arrangements.
- Provide customers with information on routes, gates, prices, timetables, terminals, or concourses.
- Perform equipment safety checks prior to departure.
- Greet passengers boarding transportation equipment and announce routes and stops.
- Explain and demonstrate safety procedures and safety equipment use.
- Open and close doors for passengers.
- Signal transportation operators to stop or to proceed.
- Adjust window shades or seat cushions at the request of passengers.
- Count and verify tickets and seat reservations and record numbers of passengers boarding and disembarking.
- Verify the contents of inventory loads against shipping papers.
- Obey traffic laws and follow established traffic and transportation procedures.
- Report any mechanical problems encountered with vehicles.
- Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
- Read maps and follow written or verbal geographic directions.
- Load and unload trucks, vans, or automobiles.
- Present bills and receipts and collect payments for goods delivered or loaded.
- Maintain records, such as vehicle logs, records of cargo, or billing statements, in accordance with regulations.
- Drive vehicles with capacities under three tons to transport materials to and from specified destinations, such as railroad stations, plants, residences, offices, or within industrial yards.
- Turn in receipts and money received from deliveries.
- Use and maintain the tools or equipment found on commercial vehicles, such as weighing or measuring devices.
- Report delays, accidents, or other traffic and transportation situations to bases or other vehicles, using telephones or mobile two-way radios.
- Perform emergency repairs, such as changing tires or installing light bulbs, fuses, tire chains, or spark plugs.
- Verify the contents of inventory loads against shipping papers.
- Weigh or measure materials or products to ensure conformance to specifications.
- Inspect materials and products for defects, and to ensure conformance to specifications.
- Record production and operational data, such as amount of materials processed.
- Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.
- Identify and mark materials, products, and samples, following instructions.
- Clean and maintain machinery, equipment, and work areas to ensure proper functioning and safe working conditions.
- Load materials and products into machines and equipment, or onto conveyors, using hand tools and moving devices.
- Transfer materials and products to and from machinery and equipment, using industrial trucks or hand trucks.
- Fasten, package, or stack materials and products, using hand tools and fastening equipment.
- Remove materials and products from machines and equipment, and place them in boxes, trucks or conveyors, using hand tools and moving devices.
- Shovel or scoop materials into containers, machines, or equipment for processing, storage, or transport.
- Open and close gates of belt and pneumatic conveyors on machines that are fed directly from preceding machines.
- Add chemicals, solutions, or ingredients to machines or equipment as required by the manufacturing process.
- Weigh or measure materials or products to ensure conformance to specifications.
- Verify that property matches legal descriptions or certifications.
- Write descriptions of the property being appraised.
- Determine the appropriate type of valuation to make, such as fair market, replacement, or liquidation, based on the needs of the property owner.
- Document physical characteristics of property such as measurements, quality, and design.
- Calculate the value of property based on comparisons to recent sales, estimated cost to reproduce, and anticipated property income streams.
- Locate and record data on sales of comparable property using specialized software, internet searches, or personal records.
- Write and submit appraisal reports for property, such as jewelry, art, antiques, collectibles, and equipment.
- Inspect personal or business property.
- Create and maintain a database of completed appraisals.
- Take photographs of property.
- Update appraisals when property has been improved, damaged, or has otherwise changed.
- Testify in court as to the value of a piece of tangible property.
- Forecast the value of property.
- Recommend loan amounts based on the value of property being used as collateral.
- Verify that property matches legal descriptions or certifications.
- Measure and verify levels of rock or gravel, bases, or other excavated material.
- Move levers, depress foot pedals, and turn dials to operate power machinery, such as power shovels, stripping shovels, scraper loaders, or backhoes.
- Set up or inspect equipment prior to operation.
- Become familiar with digging plans, machine capabilities and limitations, and efficient and safe digging procedures in a given application.
- Observe hand signals, grade stakes, or other markings when operating machines so that work can be performed to specifications.
- Operate machinery to perform activities such as backfilling excavations, vibrating or breaking rock or concrete, or making winter roads.
- Receive written or oral instructions regarding material movement or excavation.
- Move materials over short distances, such as around a construction site, factory, or warehouse.
- Create or maintain inclines or ramps.
- Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
- Handle slides, mud, or pit cleanings or maintenance.
- Direct workers engaged in placing blocks or outriggers to prevent capsizing of machines when lifting heavy loads.
- Direct ground workers engaged in activities such as moving stakes or markers, or changing positions of towers.
- Adjust dig face angles for varying overburden depths and set lengths.
- Drive machines to work sites.
- Perform manual labor to prepare or finish sites, such as shoveling materials by hand.
- Measure and verify levels of rock or gravel, bases, or other excavated material.
- Review, evaluate, and approve specifications for issuing and awarding bids.
- Develop and implement purchasing and contract management instructions, policies, and procedures.
- Locate vendors of materials, equipment or supplies, and interview them to determine product availability and terms of sales.
- Prepare bid awards requiring board approval.
- Direct and coordinate activities of personnel engaged in buying, selling, and distributing materials, equipment, machinery, and supplies.
- Review purchase order claims and contracts for conformance to company policy.
- Administer online purchasing systems.
- Prepare and process requisitions and purchase orders for supplies and equipment.
- Interview and hire staff, and oversee staff training.
- Develop cost reduction strategies and savings plans.
- Control purchasing department budgets.
- Resolve vendor or contractor grievances and claims against suppliers.
- Analyze market and delivery systems to assess present and future material availability.
- Participate in the development of specifications for equipment, products, or substitute materials.
- Maintain records of goods ordered and received.
- Represent companies in negotiating contracts and formulating policies with suppliers.
- Prepare reports regarding market conditions and merchandise costs.
- Arrange for disposal of surplus materials.
- Review, evaluate, and approve specifications for issuing and awarding bids.
- Measure parts, using precision measuring instruments, to determine whether similar parts may be machined to required sizes.
- Receive payment or obtain credit authorization.
- Assist customers, such as responding to customer complaints and updating them about back-ordered parts.
- Fill customer orders from stock, and place orders when requested items are out of stock.
- Receive and fill telephone orders for parts.
- Locate and label parts, and maintain inventory of stock.
- Prepare sales slips or sales contracts.
- Read catalogs, microfiche viewers, or computer displays to determine replacement part stock numbers and prices.
- Determine replacement parts required, according to inspections of old parts, customer requests, or customers' descriptions of malfunctions.
- Examine returned parts for defects, and exchange defective parts or refund money.
- Manage shipments by researching shipping methods or costs and tracking packages.
- Mark and store parts in stockrooms, according to prearranged systems.
- Maintain and clean work and inventory areas.
- Place new merchandise on display.
- Advise customers on substitution or modification of parts when identical replacements are not available.
- Discuss use and features of various parts, based on knowledge of machines or equipment.
- Demonstrate equipment to customers, and explain functioning of equipment.
- Pick up and deliver parts.
- Repair parts or equipment.
- Measure parts, using precision measuring instruments, to determine whether similar parts may be machined to required sizes.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Verify accuracy of timekeeping instruments with engineers to ensure trains depart on time.
- Signal engineers to begin train runs, stop trains, or change speed, using telecommunications equipment or hand signals.
- Confer with engineers regarding train routes, timetables, and cargoes, and to discuss alternative routes when there are rail defects or obstructions.
- Receive information regarding train or rail problems from dispatchers or from electronic monitoring devices.
- Receive instructions from dispatchers regarding trains' routes, timetables, and cargoes.
- Direct and instruct workers engaged in yard activities, such as switching tracks, coupling and uncoupling cars, and routing inbound and outbound traffic.
- Operate controls to activate track switches and traffic signals.
- Keep records of the contents and destination of each train car, and make sure that cars are added or removed at proper points on routes.
- Arrange for the removal of defective cars from trains at stations or stops.
- Direct engineers to move cars to fit planned train configurations, combining or separating cars to make up or break up trains.
- Inspect each car periodically during runs.
- Review schedules, switching orders, way bills, and shipping records to obtain cargo loading and unloading information and to plan work.
- Confirm routes and destination information for freight cars.
- Document and prepare reports of accidents, unscheduled stops, or delays.
- Instruct workers to set warning signals in front and at rear of trains during emergency stops.
- Observe yard traffic to determine tracks available to accommodate inbound and outbound traffic.
- Supervise workers in the inspection and maintenance of mechanical equipment to ensure efficient and safe train operation.
- Supervise and coordinate crew activities to transport freight and passengers and to provide boarding, porter, maid, and meal services to passengers.
- Record departure and arrival times, messages, tickets and revenue collected, and passenger accommodations and destinations.
- Inspect freight cars for compliance with sealing procedures, and record car numbers and seal numbers.
- Verify accuracy of timekeeping instruments with engineers to ensure trains depart on time.
- Measure tires to determine mold size requirements.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Trim excess rubber and imperfections during retreading processes.
- Fill cuts and holes in tires, using hot rubber.
- Place tires into molds for new tread.
- Fit inner tubes and final layers of rubber onto tires.
- Buff tires according to specifications for width and undertread depth.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Start rollers that bond tread and plies as drums revolve.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Cut plies at splice points, and press ends together to form continuous bands.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Clean and paint completed tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Measure tires to determine mold size requirements.
- Check specifications of materials loaded or unloaded against information contained in work orders.
- Maintain a safe working environment by monitoring safety procedures and equipment.
- Collaborate with workers and managers to solve work-related problems.
- Review work throughout the work process and at completion to ensure that it has been performed properly.
- Inform designated employees or departments of items loaded or problems encountered.
- Inspect equipment for wear and for conformance to specifications.
- Prepare and maintain work records and reports of information such as employee time and wages, daily receipts, or inspection results.
- Transmit and explain work orders to laborers.
- Plan work schedules and assign duties to maintain adequate staff for effective performance of activities and response to fluctuating workloads.
- Participate in the hiring process by reviewing credentials, conducting interviews, or making hiring decisions or recommendations.
- Estimate material, time, and staffing requirements for a given project, based on work orders, job specifications, and experience.
- Counsel employees in work-related activities, personal growth, or career development.
- Assess training needs of staff and arrange for or provide appropriate instruction.
- Conduct staff meetings to relay general information or to address specific topics, such as safety.
- Perform the same work duties as those supervised, or perform more difficult or skilled tasks or assist in their performance.
- Resolve personnel problems, complaints, or formal grievances when possible, or refer them to higher-level supervisors for resolution.
- Recommend or initiate personnel actions, such as promotions, transfers, or disciplinary measures.
- Evaluate employee performance and prepare performance appraisals.
- Examine freight to determine loading sequences.
- Schedule times of shipment and modes of transportation for materials.
- Inventory supplies and requisition or purchase additional items, as necessary.
- Quote prices to customers.
- Provide assistance in balancing books, tracking, monitoring, or projecting a unit's budget needs, and in developing unit policies and procedures.
- Inspect job sites to determine the extent of maintenance or repairs needed.
- Check specifications of materials loaded or unloaded against information contained in work orders.
- Inspect passenger tickets to verify information and to obtain destination information.
- Verify that first aid kits and other emergency equipment, including fire extinguishers and oxygen bottles, are in working order.
- Announce and demonstrate safety and emergency procedures, such as the use of oxygen masks, seat belts, and life jackets.
- Monitor passenger behavior to identify threats to the safety of the crew and other passengers.
- Walk aisles of planes to verify that passengers have complied with federal regulations prior to takeoffs and landings.
- Direct and assist passengers in emergency procedures, such as evacuating a plane following an emergency landing.
- Prepare passengers and aircraft for landing, following procedures.
- Administer first aid to passengers in distress.
- Determine special assistance needs of passengers, such as small children, the elderly, or persons with disabilities.
- Attend preflight briefings concerning weather, altitudes, routes, emergency procedures, crew coordination, lengths of flights, food and beverage services offered, and numbers of passengers.
- Reassure passengers when situations, such as turbulence, are encountered.
- Check to ensure that food, beverages, blankets, reading material, emergency equipment, and other supplies are aboard and are in adequate supply.
- Prepare reports showing places of departure and destination, passenger ticket numbers, meal and beverage inventories, the conditions of cabin equipment, and any problems encountered by passengers.
- Announce flight delays and descent preparations.
- Greet passengers boarding aircraft and direct them to assigned seats.
- Assist passengers entering or disembarking the aircraft.
- Conduct periodic trips through the cabin to ensure passenger comfort and to distribute reading material, headphones, pillows, playing cards, and blankets.
- Inspect and clean cabins, checking for any problems and making sure that cabins are in order.
- Operate audio and video systems.
- Answer passengers' questions about flights, aircraft, weather, travel routes and services, arrival times, or schedules.
- Collect money for meals and beverages.
- Heat and serve prepared foods.
- Assist passengers in placing carry-on luggage in overhead, garment, or under-seat storage.
- Take inventory of headsets, alcoholic beverages, and money collected.
- Sell alcoholic beverages to passengers.
- Inspect passenger tickets to verify information and to obtain destination information.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
- Check all load-related documentation for completeness and accuracy.
- Inspect loads to ensure that cargo is secure.
- Check vehicles to ensure that mechanical, safety, and emergency equipment is in good working order.
- Crank trailer landing gear up or down to safely secure vehicles.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Maintain logs of working hours or of vehicle service or repair status, following applicable state and federal regulations.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
- Perform basic vehicle maintenance tasks, such as adding oil, fuel, or radiator fluid, performing minor repairs, or washing trucks.
- Couple or uncouple trailers by changing trailer jack positions, connecting or disconnecting air or electrical lines, or manipulating fifth-wheel locks.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
- Drive trucks with capacities greater than 13 tons, including tractor-trailer combinations, to transport and deliver products, livestock, or other materials.
- Read and interpret maps to determine vehicle routes.
- Check conditions of trailers after contents have been unloaded to ensure that there has been no damage.
- Operate equipment, such as truck cab computers, CB radios, phones, or global positioning systems (GPS) equipment to exchange necessary information with bases, supervisors, or other drivers.
- Drive trucks to weigh stations before and after loading and along routes in compliance with state regulations.
- Load or unload trucks or help others with loading or unloading, using special loading-related equipment or other equipment as necessary.
- Plan or adjust routes based on changing conditions, using computer equipment, global positioning systems (GPS) equipment, or other navigation devices, to minimize fuel consumption and carbon emissions.
- Perform emergency roadside repairs, such as changing tires or installing light bulbs, tire chains, or spark plugs.
- Remove debris from loaded trailers.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Follow appropriate safety procedures for transporting dangerous goods.
- Inventory and inspect goods to be moved to determine quantities and conditions.
- Follow special cargo-related procedures, such as checking refrigeration systems for frozen foods or providing food or water for livestock.
- Install or remove special equipment, such as tire chains, grader blades, plow blades, or sanders.
- Wrap and secure goods using pads, packing paper, containers, or straps.
- Operate idle reduction systems or auxiliary power systems to generate power from alternative sources, such as fuel cells, to reduce idling time, to heat or cool truck cabins, or to provide power for other equipment.
- Give directions to laborers who are packing goods and moving them onto trailers.
- Collect delivery instructions from appropriate sources, verifying instructions and routes.
