- Monitor equipment functioning, observe temperature, level, and flow gauges, and perform regular unit checks to ensure that all equipment is operating as it should.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 3 | 5 | 2 | 51-8093.00 | Petroleum Pump System Operators, Refinery Operators, and Gaugers |
| 3 | 4 | 3 | 51-8021.00 | Stationary Engineers and Boiler Operators |
| 2 | 3 | 3 | 51-8011.00 | Nuclear Power Reactor Operators |
| 2 | 3 | 2 | 51-6061.00 | Textile Bleaching and Dyeing Machine Operators and Tenders |
| 2 | 3 | 2 | 51-6064.00 | Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders |
| 2 | 3 | 2 | 51-9061.00 | Inspectors, Testers, Sorters, Samplers, and Weighers |
| 2 | 2 | 3 | 51-8012.00 | Power Distributors and Dispatchers |
| 2 | 2 | 2 | 51-2051.00 | Fiberglass Laminators and Fabricators |
| 2 | 2 | 2 | 51-6063.00 | Textile Knitting and Weaving Machine Setters, Operators, and Tenders |
| 2 | 2 | 3 | 51-1011.00 | First-Line Supervisors of Production and Operating Workers |
| 2 | 2 | 2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
| 1 | 4 | 2 | 51-8091.00 | Chemical Plant and System Operators |
| 1 | 3 | 2 | 51-4051.00 | Metal-Refining Furnace Operators and Tenders |
| 1 | 3 | 4 | 11-3051.04 | Biomass Power Plant Managers |
| 1 | 3 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 2 | 51-9011.00 | Chemical Equipment Operators and Tenders |
| 1 | 3 | 2 | 51-3092.00 | Food Batchmakers 
|
| 1 | 3 | 2 | 51-9161.00 | Computer Numerically Controlled Tool Operators |
| 1 | 3 | 2 | 51-8013.00 | Power Plant Operators |
| 1 | 2 | 2 | 51-9192.00 | Cleaning, Washing, and Metal Pickling Equipment Operators and Tenders |
| 1 | 2 | 2 | 53-7072.00 | Pump Operators, Except Wellhead Pumpers |
| 1 | 2 | 2 | 53-7073.00 | Wellhead Pumpers |
| 1 | 2 | 2 | 51-4052.00 | Pourers and Casters, Metal |
| 1 | 2 | 2 | 51-6091.00 | Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers |
| 1 | 2 | 2 | 51-9193.00 | Cooling and Freezing Equipment Operators and Tenders
|
| 1 | 2 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
| 1 | 2 | 2 | 51-9012.00 | Separating, Filtering, Clarifying, Precipitating, and Still Machine Setters, Operators, and Tenders |
| 1 | 2 | 2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
| 1 | 2 | 2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
| 1 | 2 | 3 | 51-4041.00 | Machinists |
| 1 | 2 | 3 | 53-5021.00 | Captains, Mates, and Pilots of Water Vessels |
| 1 | 2 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 1 | 3 | 51-8031.00 | Water and Wastewater Treatment Plant and System Operators |
| 1 | 1 | 2 | 43-5041.00 | Meter Readers, Utilities |
| 1 | 1 | 2 | 51-9051.00 | Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders |
| 1 | 1 | 2 | 51-3011.00 | Bakers |
| 1 | 1 | 2 | 43-9071.00 | Office Machine Operators, Except Computer |
| 1 | 1 | 2 | 43-5031.00 | Public Safety Telecommunicators |
| 1 | 1 | 2 | 51-6062.00 | Textile Cutting Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-9023.00 | Mixing and Blending Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-7041.00 | Sawing Machine Setters, Operators, and Tenders, Wood |
| 1 | 1 | 3 | 51-9195.05 | Potters, Manufacturing |
| 1 | 1 | 2 | 51-5112.00 | Printing Press Operators |
| 1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 43-9051.00 | Mail Clerks and Mail Machine Operators, Except Postal Service |
| 1 | 1 | 3 | 43-3021.00 | Billing and Posting Clerks |
| 1 | 1 | 2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
| 1 | 1 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
- Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
- Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
- Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of system interconnections and capacities.
- Control or operate manifold and pumping systems to circulate liquids through a petroleum refinery.
- Operate auxiliary equipment and control multiple processing units during distilling or treating operations, moving controls that regulate valves, pumps, compressors, and auxiliary equipment.
- Collect product samples by turning bleeder valves, or by lowering containers into tanks to obtain oil samples.
- Synchronize activities with other pumphouses to ensure a continuous flow of products and a minimum of contamination between products.
- Record and compile operating data, instrument readings, documentation, and results of laboratory analyses.
- Conduct general housekeeping of units, including wiping up oil spills and performing general cleaning duties.
- Read and analyze specifications, schedules, logs, test results, and laboratory recommendations to determine how to set equipment controls to produce the required qualities and quantities of products.
- Perform tests to check the qualities and grades of products, such as assessing levels of bottom sediment, water, and foreign materials in oil samples, using centrifugal testers.
- Calculate test result values, using standard formulas.
- Clean interiors of processing units by circulating chemicals and solvents within units.
- Clamp seals around valves to secure tanks.
- Coordinate shutdowns and major projects.
- Prepare calculations for receipts and deliveries of oil and oil products.
- Lower thermometers into tanks to obtain temperature readings.
- Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
- Read automatic gauges at specified intervals to determine the flow rate of oil into or from tanks, and the amount of oil in tanks.
- Inspect pipelines, tightening connections and lubricating valves as necessary.
- Verify that incoming and outgoing products are moving through the correct meters, and that meters are working properly.
- Patrol units to monitor the amount of oil in storage tanks, and to verify that activities and operations are safe, efficient, and in compliance with regulations.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Ignite fuel in burners, using torches or flames.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Record operating data, such as the results of surveillance tests.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Observe display screens, control panels, equipment, and cloth entering or exiting processes to determine if equipment is operating correctly.
- Inspect machinery to determine necessary adjustments and repairs.
- Monitor factors such as temperatures and dye flow rates to ensure that they are within specified ranges.
- Weigh ingredients, such as dye, to be mixed together for use in textile processing.
- Start and control machines and equipment to wash, bleach, dye, or otherwise process and finish fabric, yarn, thread, or other textile goods.
- Notify supervisors or mechanics of equipment malfunctions.
- Add dyes, water, detergents, or chemicals to tanks to dilute or strengthen solutions, according to established formulas and solution test results.
- Examine and feel products to identify defects and variations from coloring and other processing standards.
- Adjust equipment controls to maintain specified heat, tension, and speed.
- Soak specified textile products for designated times.
- Confer with coworkers to get information about order details, processing plans, or problems that occur.
- Sew ends of cloth together, by hand or using machines, to form endless lengths of cloth to facilitate processing.
- Ravel seams that connect cloth ends when processing is completed.
- Remove dyed articles from tanks and machines for drying and further processing.
- Study guides, charts, and specification sheets, and confer with supervisors to determine machine setup requirements.
- Prepare dyeing machines for production runs, and conduct test runs of machines to ensure their proper operation.
- Key in processing instructions to program electronic equipment.
- Test solutions used to process textile goods to detect variations from standards.
- Record production information such as fabric yardage processed, temperature readings, fabric tensions, and machine speeds.
- Thread ends of cloth or twine through specified sections of equipment prior to processing.
- Mount rolls of cloth on machines, using hoists, or place textile goods in machines or pieces of equipment.
- Install, level, and align components such as gears, chains, dies, cutters, and needles.
- Perform machine maintenance, such as cleaning and oiling equipment, and repair or replace worn or defective parts.
- Observe display screens, control panels, equipment, and cloth entering or exiting processes to determine if equipment is operating correctly.
- Inspect machinery to determine necessary adjustments and repairs.
- Monitor factors such as temperatures and dye flow rates to ensure that they are within specified ranges.
- Inspect machinery to determine whether repairs are needed.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Notify supervisors or mechanics of equipment malfunctions.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Start machines, monitor operation, and make adjustments as needed.
- Record production data such as numbers and types of bobbins wound.
- Replace depleted supply packages with full packages.
- Stop machines when specified amount of products has been produced.
- Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
- Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
- Adjust machine settings such as speed or tension to produce products that meet specifications.
- Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Tend spinning frames that draw out and twist roving or sliver into yarn.
- Remove spindles from machines and bobbins from spindles.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
- Repair or replace worn or defective parts or components, using hand tools.
- Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Inspect machinery to determine whether repairs are needed.
- Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
- Observe operations to detect defects, malfunctions, or supply shortages.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Monitor machines that automatically measure, sort, or inspect products.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Discard or reject products, materials, or equipment not meeting specifications.
- Mark items with details, such as grade or acceptance-rejection status.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
- Notify supervisors or other personnel of production problems.
- Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
- Write test or inspection reports describing results, recommendations, or needed repairs.
- Recommend necessary corrective actions, based on inspection results.
- Make minor adjustments to equipment, such as turning setscrews to calibrate instruments to required tolerances.
- Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
- Position products, components, or parts for testing.
- Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
- Collect or select samples for testing or for use as models.
- Stack or arrange tested products for further processing, shipping, or packaging.
- Check arriving materials to ensure that they match purchase orders, submitting discrepancy reports as necessary.
- Inspect or test raw materials, parts, or products to determine compliance with environmental standards.
- Analyze test data, making computations as necessary, to determine test results.
- Compare colors, shapes, textures, or grades of products or materials with color charts, templates, or samples to verify conformance to standards.
- Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Fabricate, install, position, or connect components, parts, finished products, or instruments for testing or operational purposes.
- Administer tests to assess whether engineers or operators are qualified to use equipment.
- Interpret legal requirements, provide safety information, or recommend compliance procedures to contractors, craft workers, engineers, or property owners.
- Adjust, clean, or repair products or processing equipment to correct defects found during inspections.
- Compute usable amounts of items in shipments.
- Grade, classify, or sort products according to sizes, weights, colors, or other specifications.
- Disassemble defective parts or components, such as inaccurate or worn gauges or measuring instruments.
- Weigh materials, products, containers, or samples to verify packaging weights or ingredient quantities.
- Compute defect percentages or averages, using formulas and calculators.
- Read dials or meters to verify that equipment is functioning at specified levels.
- Monitor machines that automatically measure, sort, or inspect products.
- Monitor production operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
- Monitor and record switchboard or control board readings to ensure that electrical or steam distribution equipment is operating properly.
- Inspect equipment to ensure that specifications are met or to detect any defects.
- Coordinate with engineers, planners, field personnel, or other utility workers to provide information such as clearances, switching orders, or distribution process changes.
- Respond to emergencies, such as transformer or transmission line failures, and route current around affected areas.
- Control, monitor, or operate equipment that regulates or distributes electricity or steam, using data obtained from instruments or computers.
- Direct personnel engaged in controlling or operating distribution equipment or machinery, such as instructing control room operators to start boilers or generators.
- Distribute or regulate the flow of power between entities, such as generating stations, substations, distribution lines, or users, keeping track of the status of circuits or connections.
- Manipulate controls to adjust or activate power distribution equipment or machines.
- Prepare switching orders that will isolate work areas without causing power outages, referring to drawings of power systems.
- Implement energy schedules, including real-time transmission reservations or schedules.
- Calculate load estimates or equipment requirements to determine required control settings.
- Track conditions that could affect power needs, such as changes in the weather, and adjust equipment to meet any anticipated changes.
- Record and compile operational data, such as chart or meter readings, power demands, or usage and operating times, using transmission system maps.
- Tend auxiliary equipment used in the power distribution process.
- Monitor and record switchboard or control board readings to ensure that electrical or steam distribution equipment is operating properly.
- Inspect equipment to ensure that specifications are met or to detect any defects.
- Inspect, clean, and assemble molds before beginning work.
- Check all dies, templates, and cutout patterns to be used in the manufacturing process to ensure that they conform to dimensional data, photographs, blueprints, samples, or customer specifications.
- Release air bubbles and smooth seams, using rollers.
- Spray chopped fiberglass, resins, and catalysts onto prepared molds or dies using pneumatic spray guns with chopper attachments.
- Mix catalysts into resins, and saturate cloth and mats with mixtures, using brushes.
- Check completed products for conformance to specifications and for defects by measuring with rulers or micrometers, by checking them visually, or by tapping them to detect bubbles or dead spots.
- Pat or press layers of saturated mat or cloth into place on molds, using brushes or hands, and smooth out wrinkles and air bubbles with hands or squeegees.
- Select precut fiberglass mats, cloth, and wood-bracing materials as required by projects being assembled.
- Bond wood reinforcing strips to decks and cabin structures of watercraft, using resin-saturated fiberglass.
- Trim excess materials from molds, using hand shears or trimming knives.
- Apply layers of plastic resin to mold surfaces prior to placement of fiberglass mats, repeating layers until products have the desired thicknesses and plastics have jelled.
- Cure materials by letting them set at room temperature, placing them under heat lamps, or baking them in ovens.
- Apply lacquers and waxes to mold surfaces to facilitate assembly and removal of laminated parts.
- Repair or modify damaged or defective glass-fiber parts, checking thicknesses, densities, and contours to ensure a close fit after repair.
- Trim cured materials by sawing them with diamond-impregnated cutoff wheels.
- Mask off mold areas not to be laminated, using cellophane, wax paper, masking tape, or special sprays containing mold-release substances.
- Inspect, clean, and assemble molds before beginning work.
- Check all dies, templates, and cutout patterns to be used in the manufacturing process to ensure that they conform to dimensional data, photographs, blueprints, samples, or customer specifications.
- Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
- Inspect machinery to determine whether repairs are needed.
- Observe woven cloth to detect weaving defects.
- Thread yarn, thread, and fabric through guides, needles, and rollers of machines for weaving, knitting, or other processing.
- Remove defects in cloth by cutting and pulling out filling.
- Inspect products to ensure that specifications are met and to determine if machines need adjustment.
- Notify supervisors or repair staff of mechanical malfunctions.
- Start machines, monitor operations, and make adjustments as needed.
- Stop machines when specified amounts of product have been produced.
- Confer with co-workers to obtain information about orders, processes, or problems.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Program electronic equipment.
- Set up, or set up and operate textile machines that perform textile processing and manufacturing operations such as winding, twisting, knitting, weaving, bonding, or stretching.
- Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
- Record information about work completed and machine settings.
- Study guides, loom patterns, samples, charts, or specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
- Repair or replace worn or defective needles and other components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oil cans, or grease guns.
- Adjust machine heating mechanisms, tensions, and speeds to produce specified products.
- Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
- Inspect machinery to determine whether repairs are needed.
- Inspect materials, products, or equipment to detect defects or malfunctions.
- Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
- Enforce safety and sanitation regulations.
- Keep records of employees' attendance and hours worked.
- Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs.
- Plan and establish work schedules, assignments, and production sequences to meet production goals.
- Confer with other supervisors to coordinate operations and activities within or between departments.
- Interpret specifications, blueprints, job orders, and company policies and procedures for workers.
- Direct and coordinate the activities of employees engaged in the production or processing of goods, such as inspectors, machine setters, or fabricators.
- Conduct employee training in equipment operations or work and safety procedures, or assign employee training to experienced workers.
- Evaluate employee performance.
- Confer with management or subordinates to resolve worker problems, complaints, or grievances.
- Determine standards, budgets, production goals, and rates, based on company policies, equipment and labor availability, and workloads.
- Calculate labor and equipment requirements and production specifications, using standard formulas.
- Recommend or implement measures to motivate employees and to improve production methods, equipment performance, product quality, or efficiency.
- Maintain operations data, such as time, production, and cost records, and prepare management reports of production results.
- Requisition materials, supplies, equipment parts, or repair services.
- Set up and adjust machines and equipment.
- Recommend or execute personnel actions, such as hirings, evaluations, or promotions.
- Plan and develop new products and production processes.
- Inspect materials, products, or equipment to detect defects or malfunctions.
- Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Inspect chains, belts, or scrolls for signs of wear.
- Clean, adjust, and maintain equipment, using hand tools.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Notify supervisors of needed repairs.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Record data from operations, testing, and production on specified forms.
- Reject defective products and readjust equipment to eliminate problems.
- Clean work areas.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Read work orders to determine production specifications and information.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Mark bins as to types of mixtures stored.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Collect samples of materials or products for laboratory testing.
- Load materials into machinery and equipment, using hand tools.
- Turn valves to regulate the moisture contents of materials.
- Set mill gauges to specified fineness of grind.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Inspect chains, belts, or scrolls for signs of wear.
- Inspect operating units, such as towers, soap-spray storage tanks, scrubbers, collectors, or driers to ensure that all are functioning and to maintain maximum efficiency.
- Monitor recording instruments, flowmeters, panel lights, or other indicators and listen for warning signals to verify conformity of process conditions.
- Patrol work areas to ensure that solutions in tanks or troughs are not in danger of overflowing.
- Gauge tank levels, using calibrated rods.
- Regulate or shut down equipment during emergency situations, as directed by supervisory personnel.
- Control or operate chemical processes or systems of machines, using panelboards, control boards, or semi-automatic equipment.
- Move control settings to make necessary adjustments on equipment units affecting speeds of chemical reactions, quality, or yields.
- Draw samples of products and conduct quality control tests to monitor processing and to ensure that standards are met.
- Record operating data, such as process conditions, test results, or instrument readings.
- Turn valves to regulate flow of products or byproducts through agitator tanks, storage drums, or neutralizer tanks.
- Interpret chemical reactions visible through sight glasses or on television monitors and review laboratory test reports for process adjustments.
- Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality.
- Start pumps to wash and rinse reactor vessels, to exhaust gases or vapors, to regulate the flow of oil, steam, air, or perfume to towers, or to add products to converter or blending vessels.
- Notify maintenance, stationary engineering, or other auxiliary personnel to correct equipment malfunctions or to adjust power, steam, water, or air supplies.
- Repair or replace damaged equipment.
- Calculate material requirements or yields according to formulas.
- Direct workers engaged in operating machinery that regulates the flow of materials and products.
- Supervise the cleaning of towers, strainers, or spray tips.
- Defrost frozen valves, using steam hoses.
- Inspect operating units, such as towers, soap-spray storage tanks, scrubbers, collectors, or driers to ensure that all are functioning and to maintain maximum efficiency.
- Monitor recording instruments, flowmeters, panel lights, or other indicators and listen for warning signals to verify conformity of process conditions.
- Patrol work areas to ensure that solutions in tanks or troughs are not in danger of overflowing.
- Gauge tank levels, using calibrated rods.
- Inspect furnaces and equipment to locate defects and wear.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Operate controls to move or discharge metal workpieces from furnaces.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Inspect furnaces and equipment to locate defects and wear.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Monitor and operate communications systems, such as mobile radios.
- Review logs, datasheets, or reports to ensure adequate production levels and safe production environments or to identify abnormalities with power production equipment or processes.
- Monitor the operating status of biomass plants by observing control system parameters, distributed control systems, switchboard gauges, dials, or other indicators.
- Manage safety programs at power generation facilities.
- Review biomass operations performance specifications to ensure compliance with regulatory requirements.
- Supervise operations or maintenance employees in the production of power from biomass, such as wood, coal, paper sludge, or other waste or refuse.
- Supervise biomass plant or substation operations, maintenance, repair, or testing activities.
- Conduct field inspections of biomass plants, stations, or substations to ensure normal and safe operating conditions.
- Plan and schedule plant activities, such as wood, waste, or refuse fuel deliveries, ash removal, and regular maintenance.
- Prepare and manage biomass plant budgets.
- Evaluate power production or demand trends to identify opportunities for improved operations.
- Inspect biomass gasification processes, equipment, and facilities for ways to maximize capacity and minimize operating costs.
- Prepare reports on biomass plant operations, status, maintenance, and other information.
- Manage parts and supply inventories for biomass plants.
- Shut down and restart biomass power plants or equipment in emergency situations or for equipment maintenance, repairs, or replacements.
- Compile and record operational data on forms or in log books.
- Adjust equipment controls to generate specified amounts of electrical power.
- Test, maintain, or repair electrical power distribution machinery or equipment, using hand tools, power tools, and testing devices.
- Operate controls to start, stop, or regulate biomass-fueled generators, generator units, boilers, engines, or auxiliary systems.
- Monitor and operate communications systems, such as mobile radios.
- Review logs, datasheets, or reports to ensure adequate production levels and safe production environments or to identify abnormalities with power production equipment or processes.
- Monitor the operating status of biomass plants by observing control system parameters, distributed control systems, switchboard gauges, dials, or other indicators.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Observe safety precautions to prevent fires or explosions.
- Record operational data, such as temperatures, pressures, ingredients used, processing times, or test results.
- Control or operate equipment in which chemical changes or reactions take place during the processing of industrial or consumer products.
- Draw samples of products at specified stages so that analyses can be performed.
- Adjust controls to regulate temperature, pressure, feed, or flow of liquids or gases and times of prescribed reactions, according to knowledge of equipment and processes.
- Test product samples for specific gravity, chemical characteristics, pH levels, concentrations, or viscosities, or send them to laboratories for testing.
- Open valves or start pumps, agitators, reactors, blowers, or automatic feed of materials.
- Read plant specifications to determine products, ingredients, or prescribed modifications of plant procedures.
- Implement appropriate industrial emergency response procedures.
- Measure, weigh, and mix chemical ingredients, according to specifications.
- Dump or scoop prescribed solid, granular, or powdered materials into equipment.
- Notify maintenance engineers of equipment malfunctions.
- Estimate materials required for production and manufacturing of products.
- Add treating or neutralizing agents to products, and pump products through filters or centrifuges to remove impurities or to precipitate products.
- Observe and compare colors and consistencies of products to instrument readings and to laboratory and standard test results.
- Direct activities of workers assisting in control or verification of processes or in unloading of materials.
- Drain equipment, and pump water or other solutions through to flush and clean tanks or equipment.
- Flush or clean equipment, using steam hoses or mechanical reamers.
- Make minor repairs, lubricate, and maintain equipment, using hand tools.
- Inventory supplies received and consumed.
- Inspect equipment or units to detect leaks or malfunctions, shutting equipment down, if necessary.
- Patrol work areas to detect leaks or equipment malfunctions or to monitor operating conditions.
- Monitor gauges, recording instruments, flowmeters, or products to ensure that specified conditions are maintained.
- Inspect vats after cleaning to ensure that fermentable residue has been removed.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Record production and test data for each food product batch, such as the ingredients used, temperature, test results, and time cycle.
- Clean and sterilize vats and factory processing areas.
- Set up, operate, and tend equipment that cooks, mixes, blends, or processes ingredients in the manufacturing of food products, according to formulas or recipes.
- Mix or blend ingredients, according to recipes, using a paddle or an agitator, or by controlling vats that heat and mix ingredients.
- Follow recipes to produce food products of specified flavor, texture, clarity, bouquet, or color.
- Give directions to other workers who are assisting in the batchmaking process.
- Select and measure or weigh ingredients, using English or metric measures and balance scales.
- Press switches and turn knobs to start, adjust, and regulate equipment, such as beaters, extruders, discharge pipes, and salt pumps.
- Determine mixing sequences, based on knowledge of temperature effects and of the solubility of specific ingredients.
- Turn valve controls to start equipment and to adjust operation to maintain product quality.
- Modify cooking and forming operations based on the results of sampling processes, adjusting time cycles and ingredients to achieve desired qualities, such as firmness or texture.
- Examine, feel, and taste product samples during production to evaluate quality, color, texture, flavor, and bouquet, and document the results.
- Test food product samples for moisture content, acidity level, specific gravity, or butter-fat content, and continue processing until desired levels are reached.
- Fill processing or cooking containers, such as kettles, rotating cookers, pressure cookers, or vats, with ingredients, by opening valves, by starting pumps or injectors, or by hand.
- Manipulate products, by hand or using machines, to separate, spread, knead, spin, cast, cut, pull, or roll products.
- Cool food product batches on slabs or in water-cooled kettles.
- Place products on carts or conveyors to transfer them to the next stage of processing.
- Homogenize or pasteurize material to prevent separation or to obtain prescribed butterfat content, using a homogenizing device.
- Grade food products according to government regulations or according to type, color, bouquet, and moisture content.
- Operate refining machines to reduce the particle size of cooked batches.
- Formulate or modify recipes for specific kinds of food products.
- Inspect and pack the final product.
- Inspect vats after cleaning to ensure that fermentable residue has been removed.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Implement changes to machine programs, and enter new specifications, using computers.
- Calculate machine speed and feed ratios and the size and position of cuts.
- Transfer commands from servers to computer numerical control (CNC) modules, using computer network links.
- Remove and replace dull cutting tools.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Maintain machines and remove and replace broken or worn machine tools, using hand tools.
- Insert control instructions into machine control units to start operation.
- Modify cutting programs to account for problems encountered during operation, and save modified programs.
- Write simple programs for computer-controlled machine tools.
- Lift workpieces to machines manually or with hoists or cranes.
- Input initial part dimensions into machine control panels.
- Set up future jobs while machines are operating.
- Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
- Stack or load finished items, or place items on conveyor systems.
- Control coolant systems.
- Clean machines, tooling, or parts, using solvents or solutions and rags.
- Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions.
- Lay out and mark areas of parts to be shot peened and fill hoppers with shot.
- Examine electronic components for defects or completeness of laser-beam trimming, using microscopes.
- Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Check to ensure that workpieces are properly lubricated and cooled during machine operation.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Control generator output to match the phase, frequency, or voltage of electricity supplied to panels.
- Take regulatory action, based on readings from charts, meters and gauges, at established intervals.
- Control power generating equipment, including boilers, turbines, generators, or reactors, using control boards or semi-automatic equipment.
- Start or stop generators, auxiliary pumping equipment, turbines, or other power plant equipment as necessary.
- Operate or maintain distributed power generation equipment, including fuel cells or microturbines, to produce energy on-site for manufacturing or other commercial purposes.
- Open and close valves and switches in sequence to start or shut down auxiliary units.
- Control or maintain auxiliary equipment, such as pumps, fans, compressors, condensers, feedwater heaters, filters, or chlorinators, to supply water, fuel, lubricants, air, or auxiliary power.
- Regulate equipment operations and conditions, such as water levels, based on instrument data or from computers.
- Inspect records or log book entries or communicate with plant personnel to assess equipment operating status.
- Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or compressors, to prevent failure or deterioration.
- Record and compile operational data by completing and maintaining forms, logs, or reports.
- Make adjustments or minor repairs, such as tightening leaking gland or pipe joints.
- Adjust controls to generate specified electrical power or to regulate the flow of power between generating stations and substations.
- Operate, control, or monitor equipment, such as acid or gas carbon dioxide removal units, carbon dioxide compressors, or pipelines, to capture, store, or transport carbon dioxide exhaust.
- Operate, control, or monitor gasifiers or related equipment, such as coolers, water quenches, water gas shifts reactors, or sulfur recovery units, to produce syngas or electricity from coal.
- Communicate with systems operators to regulate and coordinate line voltages and transmission loads and frequencies.
- Operate, control, or monitor integrated gasification combined cycle (IGCC) or related equipment, such as air separation units, to generate electricity from coal.
- Receive outage calls and request necessary personnel during power outages or emergencies.
- Collect oil, water, or electrolyte samples for laboratory analysis.
- Examine and test electrical power distribution machinery and equipment, using testing devices.
- Diagnose or troubleshoot problems with gas collection systems.
- Monitor well fields periodically to ensure proper functioning and performance.
- Operate landfill gas, methane, or natural gas fueled electrical generation systems.
- Prepare and submit compliance, operational, and safety forms or reports.
- Repair or replace gas piping.
- Trace electrical circuitry to ensure compliance of electrical systems with applicable codes or laws.
- Verify that well field monitoring data conforms to applicable regulations.
- Place standby emergency electrical generators on line in emergencies and monitor the temperature, output, and lubrication of the system.
- Monitor power plant equipment and indicators to detect evidence of operating problems.
- Analyze the layout, instrumentation, or function of electrical generation or transmission facilities.
- Examine and inspect machines to detect malfunctions.
- Observe machine operations, gauges, or thermometers, and adjust controls to maintain specified conditions.
- Add specified amounts of chemicals to equipment at required times to maintain solution levels and concentrations.
- Set controls to regulate temperature and length of cycles, and start conveyors, pumps, agitators, and machines.
- Drain, clean, and refill machines or tanks at designated intervals, using cleaning solutions or water.
- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
- Record gauge readings, materials used, processing times, or test results in production logs.
- Measure, weigh, or mix cleaning solutions, using measuring tanks, calibrated rods or suction tubes.
- Draw samples for laboratory analysis, or test solutions for conformance to specifications, such as acidity or specific gravity.
- Adjust, clean, and lubricate mechanical parts of machines, using hand tools and grease guns.
- Load machines with objects to be processed and unload them after cleaning, placing them on conveyors or racks.
- Examine and inspect machines to detect malfunctions.
- Observe machine operations, gauges, or thermometers, and adjust controls to maintain specified conditions.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Record operating data such as products and quantities pumped, stocks used, gauging results, and operating times.
- Plan movement of products through lines to processing, storage, and shipping units, using knowledge of interconnections and capacities of pipelines, valve manifolds, pumps, and tankage.
- Turn valves and start pumps to start or regulate flows of substances such as gases, liquids, slurries, or powdered materials.
- Communicate with other workers, using signals, radios, or telephones, to start and stop flows of materials or substances.
- Connect hoses and pipelines to pumps and vessels prior to material transfer, using hand tools.
- Tend vessels that store substances such as gases, liquids, slurries, or powdered materials, checking levels of substances by using calibrated rods or by reading mercury gauges and tank charts.
- Clean, lubricate, and repair pumps and vessels, using hand tools and equipment.
- Read operating schedules or instructions or receive verbal orders to determine amounts to be pumped.
- Test materials and solutions, using testing equipment.
- Add chemicals and solutions to tanks to ensure that specifications are met.
- Collect and deliver sample solutions for laboratory analysis.
- Pump two or more materials into one tank to blend mixtures.
- Tend auxiliary equipment such as water treatment and refrigeration units, and heat exchangers.
- Monitor gauges and flowmeters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressures are at specified levels, reporting abnormalities as necessary.
- Monitor pumps and flow lines for gas and fluid leaks.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Gauge oil and gas production.
- Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil.
- Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks.
- Repair gas and oil meters and gauges.
- Perform routine maintenance on vehicles and equipment.
- Open valves to return compressed gas to bottoms of specified wells to repressurize them and force oil to surface.
- Change water filters.
- Prepare trucks and equipment necessary for the type of pumping service required.
- Attach pumps and hoses to wellheads.
- Mix acids, chemicals, or dry cement as required for a specific job.
- Unload and assemble pipes and pumping equipment, using hand tools.
- Supervise oil pumpers and other workers engaged in producing oil from wells.
- Monitor pumps and flow lines for gas and fluid leaks.
- Monitor control panels during pumping operations to ensure that materials are being pumped at the correct pressure, density, rate, and concentration.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Transport metal ingots to storage areas, using forklifts.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Add metal to molds to compensate for shrinkage.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Move controls to activate and adjust extruding and forming machines.
- Record details of machine malfunctions.
- Clean and maintain extruding and forming machines, using hand tools.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Record operational data on tags, and attach tags to machines.
- Remove excess, entangled, or completed filaments from machines, using hand tools.
- Wipe finish rollers with cloths and wash finish trays with water when necessary.
- Lower pans inside cabinets to catch molten filaments until flow of polymer through packs has stopped.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Record temperatures, amounts of materials processed, or test results on report forms.
- Start machinery, such as pumps, feeders, or conveyors, and turn valves to heat, admit, or transfer products, refrigerants, or mixes.
- Correct machinery malfunctions by performing actions such as removing jams, and inform supervisors of malfunctions as necessary.
- Assemble equipment, and attach pipes, fittings, or valves, using hand tools.
- Measure or weigh specified amounts of ingredients or materials, and load them into tanks, vats, hoppers, or other equipment.
- Adjust machine or freezer speed and air intake to obtain desired consistency and amount of product.
- Weigh packages and adjust freezer air valves or switches on filler heads to obtain specified amounts of product in each container.
- Inspect and flush lines with solutions or steam, and spray equipment with sterilizing solutions.
- Load and position wrapping paper, sticks, bags, or cartons into dispensing machines.
- Sample and test product characteristics such as specific gravity, acidity, and sugar content, using hydrometers, pH meters, or refractometers.
- Start agitators to blend contents, or start beater, scraper, and expeller blades to mix contents with air and prevent sticking.
- Place or position containers into equipment, and remove containers after completion of cooling or freezing processes.
- Scrape, dislodge, or break excess frost, ice, or frozen product from equipment to prevent accumulation, using hands and hand tools.
- Activate mechanical rakes to regulate flow of ice from storage bins to vats.
- Stir material with spoons or paddles to mix ingredients or allow even cooling and prevent coagulation.
- Insert forming fixtures, and start machines that cut frozen products into measured portions or specified shapes.
- Read dials and gauges on panel control boards to ascertain temperatures, alkalinities, and densities of mixtures, and turn valves to obtain specified mixtures.
- Monitor pressure gauges, ammeters, flowmeters, thermometers, or products, and adjust controls to maintain specified conditions, such as feed rate, product consistency, temperature, air pressure, and machine speed.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Inspect machines or equipment for hazards, operating efficiency, malfunctions, wear, or leaks.
- Monitor material flow or instruments, such as temperature or pressure gauges, indicators, or meters, to ensure optimal processing conditions.
- Dump, pour, or load specified amounts of refined or unrefined materials into equipment or containers for further processing or storage.
- Operate machines to process materials in compliance with applicable safety, energy, or environmental regulations.
- Turn valves or move controls to admit, drain, separate, filter, clarify, mix, or transfer materials.
- Set up or adjust machine controls to regulate conditions such as material flow, temperature, or pressure.
- Examine samples to verify qualities such as clarity, cleanliness, consistency, dryness, or texture.
- Start agitators, shakers, conveyors, pumps, or centrifuge machines.
- Collect samples of materials or products for laboratory analysis.
- Communicate processing instructions to other workers.
- Turn valves to pump sterilizing solutions or rinse water through pipes or equipment or to spray vats with atomizers.
- Maintain logs of instrument readings, test results, or shift production for entry in computer databases.
- Remove clogs, defects, or impurities from machines, tanks, conveyors, screens, or other processing equipment.
- Clean or sterilize tanks, screens, inflow pipes, production areas, or equipment, using hoses, brushes, scrapers, or chemical solutions.
- Measure or weigh materials to be refined, mixed, transferred, stored, or otherwise processed.
- Test samples to determine viscosity, acidity, specific gravity, or degree of concentration, using test equipment such as viscometers, pH meters, or hydrometers.
- Install, maintain, or repair hoses, pumps, filters, or screens to maintain processing equipment, using hand tools.
- Connect pipes between vats and processing equipment.
- Assemble fittings, valves, bowls, plates, disks, impeller shafts, or other parts to prepare equipment for operation.
- Remove full containers from discharge outlets and replace them with empty containers.
- Inspect machines or equipment for hazards, operating efficiency, malfunctions, wear, or leaks.
- Monitor material flow or instruments, such as temperature or pressure gauges, indicators, or meters, to ensure optimal processing conditions.
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
- Clean or maintain products, machines, or work areas.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
- Grease or oil woodworking machines.
- Unclamp workpieces and remove them from machines.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
- Control hoists to remove parts or products from work stations.
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Monitor the feed and speed of machines during the machining process.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Operate equipment to verify operational efficiency.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Prepare working sketches for the illustration of product appearance.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Advise clients about the materials being used for finished products.
- Monitor the feed and speed of machines during the machining process.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Inspect vessels to ensure efficient and safe operation of vessels and equipment and conformance to regulations.
- Read gauges to verify sufficient levels of hydraulic fluid, air pressure, or oxygen.
- Direct courses and speeds of ships, based on specialized knowledge of local winds, weather, water depths, tides, currents, and hazards.
- Prevent ships under navigational control from engaging in unsafe operations.
- Serve as a vessel's docking master upon arrival at a port or at a berth.
- Consult maps, charts, weather reports, or navigation equipment to determine and direct ship movements.
- Steer and operate vessels, using radios, depth finders, radars, lights, buoys, or lighthouses.
- Operate ship-to-shore radios to exchange information needed for ship operations.
- Dock or undock vessels, sometimes maneuvering through narrow spaces, such as locks.
- Stand watches on vessels during specified periods while vessels are under way.
- Report to appropriate authorities any violations of federal or state pilotage laws.
- Provide assistance in maritime rescue operations.
- Signal passing vessels, using whistles, flashing lights, flags, or radios.
- Measure depths of water, using depth-measuring equipment.
- Signal crew members or deckhands to rig tow lines, open or close gates or ramps, or pull guard chains across entries.
- Maintain boats or equipment on board, such as engines, winches, navigational systems, fire extinguishers, or life preservers.
- Maintain records of daily activities, personnel reports, ship positions and movements, ports of call, weather and sea conditions, pollution control efforts, or cargo or passenger status.
- Advise ships' masters on harbor rules and customs procedures.
- Observe loading or unloading of cargo or equipment to ensure that handling and storage are performed according to specifications.
- Calculate sightings of land, using electronic sounding devices and following contour lines on charts.
- Learn to operate new technology systems and procedures through instruction, simulators, or models.
- Direct or coordinate crew members or workers performing activities such as loading or unloading cargo, steering vessels, operating engines, or operating, maintaining, or repairing ship equipment.
- Arrange for ships to be fueled, restocked with supplies, or repaired.
- Supervise crews in cleaning or maintaining decks, superstructures, or bridges.
- Purchase supplies or equipment.
- Tow and maneuver barges or signal tugboats to tow barges to destinations.
- Perform various marine duties, such as checking for oil spills or other pollutants around ports or harbors or patrolling beaches.
- Assign watches or living quarters to crew members.
- Interview and hire crew members.
- Conduct safety drills such as man overboard or fire drills.
- Inspect vessels to ensure efficient and safe operation of vessels and equipment and conformance to regulations.
- Read gauges to verify sufficient levels of hydraulic fluid, air pressure, or oxygen.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Start machines, monitor their operations, and record operational data.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Load workpieces, plastic material, or chemical solutions into machines.
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Mark identifying data on workpieces.
- Clean work area.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Operate forklifts to deliver materials.
- Lubricate workpieces with oil.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
- Thread ends of metal coils from reels through slitters and secure ends on recoilers.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Replace defective blades or wheels, using hand tools.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Preheat workpieces, using heating furnaces or hand torches.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Hone cutters with oilstones to remove nicks.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Start machines, monitor their operations, and record operational data.
- Inspect equipment or monitor operating conditions, meters, and gauges to determine load requirements and detect malfunctions.
- Add chemicals, such as ammonia, chlorine, or lime, to disinfect and deodorize water and other liquids.
- Collect and test water and sewage samples, using test equipment and color analysis standards.
- Record operational data, personnel attendance, or meter and gauge readings on specified forms.
- Operate and adjust controls on equipment to purify and clarify water, process or dispose of sewage, and generate power.
- Maintain, repair, and lubricate equipment, using hand tools and power tools.
- Clean and maintain tanks, filter beds, and other work areas, using hand tools and power tools.
- Direct and coordinate plant workers engaged in routine operations and maintenance activities.
- Inspect equipment or monitor operating conditions, meters, and gauges to determine load requirements and detect malfunctions.
- Inspect meters for unauthorized connections, defects, and damage, such as broken seals.
- Read electric, gas, water, or steam consumption meters and enter data in route books or hand-held computers.
- Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.
- Walk or drive vehicles along established routes to take readings of meter dials.
- Verify readings in cases where consumption appears to be abnormal, and record possible reasons for fluctuations.
- Report to service departments any problems, such as meter irregularities, damaged equipment, or impediments to meter access, including dogs.
- Leave messages to arrange different times to read meters in cases in which meters are not accessible.
- Connect and disconnect utility services at specific locations.
- Answer customers' questions about services and charges, or direct them to customer service centers.
- Update client address and meter location information.
- Perform preventative maintenance or minor repairs on meters.
- Report lost or broken keys.
- Inspect meters for unauthorized connections, defects, and damage, such as broken seals.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems.
- Press and adjust controls to activate, set, and regulate equipment according to specifications.
- Record gauge readings, test results, and shift production in log books.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Load equipment receptacles or conveyors with material to be processed, by hand or using hoists.
- Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing.
- Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions.
- Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures.
- Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers.
- Direct crane operators and crew members to load vessels with materials to be processed.
- Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets.
- Replace worn or defective equipment parts, using hand tools.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Check equipment to ensure that it meets health and safety regulations, and perform maintenance or cleaning, as necessary.
- Check products for quality, and identify damaged or expired goods.
- Set oven temperatures, and place items into hot ovens for baking.
- Combine measured ingredients in bowls of mixing, blending, or cooking machinery.
- Place dough in pans, molds, or on sheets, and bake in production ovens or on grills.
- Set time and speed controls for mixing machines, blending machines, or steam kettles so that ingredients will be mixed or cooked according to instructions.
- Measure or weigh flour or other ingredients to prepare batters, doughs, fillings, or icings, using scales or graduated containers.
- Observe color of products being baked, and adjust oven temperatures, humidity, or conveyor speeds accordingly.
- Check the quality of raw materials to ensure that standards and specifications are met.
- Adapt the quantity of ingredients to match the amount of items to be baked.
- Apply glazes, icings, or other toppings to baked goods, using spatulas or brushes.
- Decorate baked goods, such as cakes or pastries.
- Roll, knead, cut, or shape dough to form sweet rolls, pie crusts, tarts, cookies, or other products.
- Direct or coordinate bakery deliveries.
- Order or receive supplies or equipment.
- Prepare or maintain inventory or production records.
- Operate slicing or wrapping machines.
- Develop new recipes for baked goods.
- Check equipment to ensure that it meets health and safety regulations, and perform maintenance or cleaning, as necessary.
- Monitor machine operation, and make adjustments as necessary to ensure proper operation.
- Read job orders to determine the type of work to be done, the quantities to be produced, and the materials needed.
- Deliver completed work.
- Place original copies in feed trays, feed originals into feed rolls, or position originals on tables beneath camera lenses.
- Sort, assemble, and proof completed work.
- Operate office machines such as high speed business photocopiers, readers, scanners, addressing machines, stencil-cutting machines, microfilm readers or printers, folding and inserting machines, bursters, and binder machines.
- Complete records of production, including work volumes and outputs, materials used, and any backlogs.
- Compute prices for services and receive payment, or provide supervisors with billing information.
- Set up and adjust machines, regulating factors such as speed, ink flow, focus, and number of copies.
- Load machines with materials such as blank paper or film.
- Clean machines, perform minor repairs, and report major repair needs.
- File and store completed documents.
- Operate auxiliary machines such as collators, pad and tablet making machines, staplers, and paper punching, folding, cutting, and perforating machines.
- Maintain stock of supplies, and requisition any needed items.
- Prepare and process papers for use in scanning, microfilming, and microfiche.
- Clean and file master copies or plates.
- Cut copies apart and write identifying information, such as page numbers or titles, on copies.
- Move heat units and clamping frames over screen beds to form Braille impressions on pages, raising frames to release individual copies.
- Monitor machine operation, and make adjustments as necessary to ensure proper operation.
- Test and adjust communication and alarm systems, and report malfunctions to maintenance units.
- Provide emergency medical instructions to callers.
- Question callers to determine their locations and the nature of their problems to determine type of response needed.
- Determine response requirements and relative priorities of situations, and dispatch units in accordance with established procedures.
- Receive incoming telephone or alarm system calls regarding emergency and non-emergency police and fire service, emergency ambulance service, information, and after-hours calls for departments within a city.
- Relay information and messages to and from emergency sites, to law enforcement agencies, and to all other individuals or groups requiring notification.
- Record details of calls, dispatches, and messages.
- Monitor various radio frequencies, such as those used by public works departments, school security, and civil defense, to stay apprised of developing situations.
- Read and effectively interpret small-scale maps and information from a computer screen to determine locations and provide directions.
- Maintain access to, and security of, highly sensitive materials.
- Enter, update, and retrieve information from teletype networks and computerized data systems regarding such things as wanted persons, stolen property, vehicle registration, and stolen vehicles.
- Scan status charts and computer screens, and contact emergency response field units to determine emergency units available for dispatch.
- Answer routine inquiries, and refer calls not requiring dispatches to appropriate departments and agencies.
- Learn material and pass required tests for certification.
- Observe alarm registers and scan maps to determine whether a specific emergency is in the dispatch service area.
- Maintain files of information relating to emergency calls, such as personnel rosters and emergency call-out and pager files.
- Operate and maintain mobile dispatch vehicles and equipment.
- Monitor alarm systems to detect emergencies, such as fires and illegal entry into establishments.
- Test and adjust communication and alarm systems, and report malfunctions to maintenance units.
- Inspect machinery to determine whether repairs are needed.
- Inspect products to ensure that the quality standards and specifications are met.
- Place patterns on top of layers of fabric and cut fabric following patterns, using electric or manual knives, cutters, or computer numerically controlled cutting devices.
- Start machines, monitor operations, and make adjustments as needed.
- Adjust machine controls, such as heating mechanisms, tensions, or speeds, to produce specified products.
- Record information about work completed and machine settings.
- Notify supervisors of mechanical malfunctions.
- Confer with coworkers to obtain information about orders, processes, or problems.
- Repair or replace worn or defective parts or components, using hand tools.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Operate machines to cut multiple layers of fabric into parts for articles such as canvas goods, house furnishings, garments, hats, or stuffed toys.
- Adjust cutting techniques to types of fabrics and styles of garments.
- Program electronic equipment.
- Study guides, samples, charts, and specification sheets or confer with supervisors or engineering staff to determine set-up requirements.
- Stop machines when specified amounts of product have been produced.
- Operate machines for test runs to verify adjustments and to obtain product samples.
- Install, level, and align components, such as gears, chains, guides, dies, cutters, or needles, to set up machinery for operation.
- Inspect machinery to determine whether repairs are needed.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
- Read work orders to determine production specifications or information.
- Mix or blend ingredients by starting machines and mixing for specified times.
- Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
- Compound or process ingredients or dyes, according to formulas.
- Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
- Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.
- Dump or pour specified amounts of materials into machinery or equipment.
- Record operational or production data on specified forms.
- Collect samples of materials or products for laboratory testing.
- Unload mixtures into containers or onto conveyors for further processing.
- Clean work areas.
- Add or mix chemicals or ingredients for processing, using hand tools or other devices.
- Tend accessory equipment, such as pumps or conveyors, to move materials or ingredients through production processes.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Clean and maintain equipment, using hand tools.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Open valves to drain slurry from mixers into storage tanks.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
- Trim lumber to straighten rough edges or remove defects, using circular saws.
- Count, sort, or stack finished workpieces.
- Position and clamp stock on tables, conveyors, or carriages, using hoists, guides, stops, dogs, wedges, or wrenches.
- Measure and mark stock for cuts.
- Operate panelboards of saw or conveyor systems to move stock through processes or to cut stock to specified dimensions.
- Examine blueprints, drawings, work orders, or patterns to determine equipment set-up or selection details, procedures to be used, or dimensions of final products.
- Select saw blades, types or grades of stock, or cutting procedures to be used, according to work orders or supervisors' instructions.
- Cut grooves, bevels, or miters, saw curved or irregular designs, and sever or shape metals, according to specifications or work orders.
- Unclamp and remove finished workpieces from tables.
- Dispose of waste material after completing work assignments.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Operate gas or electric kilns to fire pottery pieces.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels.
- Move pieces from wheels so that they can dry.
- Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work.
- Attach handles to pottery pieces.
- Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes.
- Pack and ship pottery to stores or galleries for retail sale.
- Smooth surfaces of finished pieces, using rubber scrapers and wet sponges.
- Pull wires through bases of articles and wheels to separate finished pieces.
- Design spaces to display pottery for sale.
- Verify accuracy of shapes and sizes of objects, using calipers and templates.
- Examine finished ware for defects and measure dimensions, using rule and thickness gauge.
- Maintain supplies of tools, equipment, and materials, and order additional supplies as needed.
- Operate pug mills to blend and extrude clay.
- Perform test-fires of pottery to determine how to achieve specific colors and textures.
- Operate drying chambers to dry or finish molded ceramic ware.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Design clay forms and molds, and decorations for forms.
- Teach pottery classes.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Monitor automated press operation systems and respond to fault, error, or alert messages.
- Start presses and pull proofs to check for ink coverage and density, alignment, and registration.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Adjust ink fountain flow rates.
- Verify that paper and ink meet the specifications for a given job.
- Collect and inspect random samples during print runs to identify any necessary adjustments.
- Feed paper through press cylinders and adjust feed and tension controls.
- Load presses with paper and make necessary adjustments, according to paper size.
- Secure printing plates to printing units and adjust tolerances.
- Clean ink fountains, plates, or printing unit cylinders when press runs are completed.
- Change press plates, blankets, or cylinders, as required.
- Obtain or mix inks and fill ink fountains.
- Input production job settings into workstation terminals that control automated printing systems.
- Clean or oil presses or make minor repairs, using hand tools.
- Maintain time or production records.
- Monitor inventory levels on a regular basis, ordering or requesting additional supplies, as necessary.
- Monitor environmental factors, such as humidity and temperature, that may impact equipment performance and make necessary adjustments.
- Download or scan files to be printed, using printing production software.
- Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
- Direct or monitor work of press crews.
- Download completed jobs to archive media so that questions can be answered or jobs replicated.
- Control workflow scheduling or job tracking, using computer database software.
- Set up or operate auxiliary equipment, such as cutting, folding, plate-making, drilling, or laminating machines.
- Monitor automated press operation systems and respond to fault, error, or alert messages.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Start machines that automatically feed plates, stencils, or tapes through mechanisms, and observe machine operations to detect any malfunctions.
- Wrap packages or bundles by hand, or by using tying machines.
- Verify that items are addressed correctly, marked with the proper postage, and in suitable condition for processing.
- Remove containers of sorted mail or parcels and transfer them to designated areas according to established procedures.
- Sort and route incoming mail, and collect outgoing mail, using carts as necessary.
- Affix postage to packages or letters by hand, or stamp materials, using postage meters.
- Determine manner in which mail is to be sent, and prepare it for delivery to mailing facilities.
- Accept and check containers of mail or parcels from large volume mailers, couriers, and contractors.
- Seal or open envelopes, by hand or by using machines.
- Weigh packages or letters to determine postage needed, using weighing scales and rate charts.
- Inspect mail machine output for defects and determine how to eliminate causes of any defects.
- Remove from machines printed materials, such as labeled articles, postmarked envelopes or tape, and folded sheets.
- Release packages or letters to customers upon presentation of written notices or other identification.
- Operate computer-controlled keyboards or voice recognition equipment to direct items according to established routing schemes.
- Answer inquiries regarding shipping or mailing policies.
- Lift and unload containers of mail or parcels onto equipment for transportation to sortation stations.
- Contact delivery or courier services to arrange delivery of letters and parcels.
- Place incoming or outgoing letters or packages into sacks or bins based on destination or type, and place identifying tags on sacks or bins.
- Clear jams in sortation equipment.
- Mail merchandise samples or promotional literature in response to requests.
- Adjust guides, rollers, loose card inserters, weighing machines, and tying arms, using rules and hand tools.
- Read production orders to determine types and sizes of items scheduled for printing and mailing.
- Sell mail products, and accept payment for products and mailing charges.
- Stamp dates and times of receipt of incoming mail.
- Add ink, fill paste reservoirs, and change machine ribbons when necessary.
- Fold letters or circulars and insert them in envelopes.
- Start machines that automatically feed plates, stencils, or tapes through mechanisms, and observe machine operations to detect any malfunctions.
- Monitor equipment to ensure proper operation.
- Verify accuracy of billing data and revise any errors.
- Resolve discrepancies in accounting records.
- Prepare itemized statements, bills, or invoices and record amounts due for items purchased or services rendered.
- Operate typing, adding, calculating, or billing machines.
- Post stop-payment notices to prevent payment of protested checks.
- Verify signatures and required information on checks.
- Keep records of invoices and support documents.
- Perform bookkeeping work, including posting data or keeping other records concerning costs of goods or services or the shipment of goods.
- Contact customers to obtain or relay account information.
- Route statements for mailing or over-the-counter delivery to customers.
- Fix minor problems, such as equipment jams, and notify repair personnel of major equipment problems.
- Review documents, such as purchase orders, sales tickets, charge slips, or hospital records, to compute fees or charges due.
- Track accumulated hours and dollar amounts charged to each client job to calculate client fees for professional services, such as legal or accounting services.
- Weigh envelopes containing statements to determine correct postage and affix postage, using stamps or metering equipment.
- Consult sources, such as rate books, manuals, or insurance company representatives, to determine specific charges or information such as rules, regulations, or government tax and tariff information.
- Compare previously prepared bank statements with canceled checks and reconcile discrepancies.
- Take orders for imprinted checks.
- Encode and cancel checks, using bank machines.
- Load machines with statements, cancelled checks, or envelopes to prepare statements for distribution to customers or stuff envelopes by hand.
- Compute credit terms, discounts, shipment charges, or rates for goods or services to complete billing documents.
- Update manuals when rates, rules, or regulations are amended.
- Review compiled data on operating costs and revenues to set rates.
- Answer inquiries regarding rates, routing, or procedures.
- Compile reports of cost factors, such as labor, production, storage, and equipment.
- Create billing documents, shipping labels, credit memorandums, or credit forms.
- Perform general administrative tasks, such as answering telephones, scheduling appointments, and ordering supplies or equipment.
- Return checks to customers or retrieve checks returned to customers in error, adjusting accounts and answering inquiries about errors as necessary.
- Monitor equipment to ensure proper operation.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Record operational information on specified production reports.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Give directions to other workers regarding machine set-up and use.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Remove completed workpieces or parts from machinery, using hand tools.
- Transfer components, metal products, or assemblies, using moving equipment.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Tend auxiliary equipment used in welding processes.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Anneal finished workpieces to relieve internal stress.
- Load or feed workpieces into welding machines to join or bond components.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean and maintain equipment, using water hoses and scrapers.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Preheat workpieces in ovens.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
