- Sand and apply sealer to properly dried finish.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
5 | 5 | 2 | 51-7021.00 | Furniture Finishers |
3 | 3 | 2 | 51-9194.00 | Etchers and Engravers |
3 | 3 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
2 | 5 | 2 | 47-2141.00 | Painters, Construction and Maintenance |
2 | 4 | 2 | 47-2042.00 | Floor Layers, Except Carpet, Wood, and Hard Tiles
|
2 | 2 | 1 | 47-2161.00 | Plasterers and Stucco Masons |
2 | 2 | 2 | 51-3011.00 | Bakers
|
2 | 2 | 2 | 51-7011.00 | Cabinetmakers and Bench Carpenters |
1 | 11 | 1 | 47-2051.00 | Cement Masons and Concrete Finishers |
1 | 9 | 2 | 47-2053.00 | Terrazzo Workers and Finishers |
1 | 5 | 2 | 47-2082.00 | Tapers |
1 | 5 | 2 | 47-2142.00 | Paperhangers |
1 | 4 | 2 | 47-3011.00 | Helpers--Brickmasons, Blockmasons, Stonemasons, and Tile and Marble Setters |
1 | 3 | 2 | 51-9197.00 | Tire Builders |
1 | 2 | 2 | 47-2131.00 | Insulation Workers, Floor, Ceiling, and Wall |
1 | 2 | 2 | 47-2132.00 | Insulation Workers, Mechanical |
1 | 2 | 3 | 51-4062.00 | Patternmakers, Metal and Plastic |
1 | 2 | 2 | 51-4194.00 | Tool Grinders, Filers, and Sharpeners |
1 | 2 | 2 | 53-7061.00 | Cleaners of Vehicles and Equipment |
1 | 1 | 2 | 51-2021.00 | Coil Winders, Tapers, and Finishers |
1 | 1 | 1 | 51-9123.00 | Painting, Coating, and Decorating Workers |
1 | 1 | 2 | 51-4192.00 | Layout Workers, Metal and Plastic |
1 | 1 | 3 | 51-7031.00 | Model Makers, Wood |
1 | 1 | 3 | 51-9082.00 | Medical Appliance Technicians |
1 | 1 | 2 | 47-2041.00 | Carpet Installers |
1 | 1 | 2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers
|
1 | 1 | 3 | 51-7032.00 | Patternmakers, Wood |
1 | 1 | 3 | 51-9195.05 | Potters, Manufacturing |
1 | 1 | 2 | 51-5113.00 | Print Binding and Finishing Workers |
1 | 1 | 3 | 51-9071.00 | Jewelers and Precious Stone and Metal Workers |
1 | 1 | 1 | 51-6011.00 | Laundry and Dry-Cleaning Workers |
1 | 1 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Remove excess solvent, using cloths soaked in paint thinner.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Wash surfaces to prepare them for finish application.
- Follow blueprints to produce specific designs.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Clean and polish engraved areas.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Spray coating in specified patterns according to instructions.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean and maintain equipment, using water hoses and scrapers.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Install gears and holding devices on conveyor equipment.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Spray coating in specified patterns according to instructions.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
- Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
- Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers.
- Waterproof buildings, using waterproofers or caulking.
- Spray or brush hot plastics or pitch onto surfaces.
- Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.
- Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting.
- Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines.
- Read work orders or receive instructions from supervisors or homeowners to determine work requirements.
- Erect scaffolding or swing gates, or set up ladders, to work above ground level.
- Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
- Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.
- Polish final coats to specified finishes.
- Select and purchase tools or finishes for surfaces to be covered, considering durability, ease of handling, methods of application, and customers' wishes.
- Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.
- Remove fixtures such as pictures, door knobs, lamps, or electric switch covers prior to painting.
- Use special finishing techniques such as sponging, ragging, layering, or faux finishing.
- Cut stencils and brush or spray lettering or decorations on surfaces.
- Bake finishes on painted or enameled articles, using baking ovens.
- Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
- Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
- Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers.
- Waterproof buildings, using waterproofers or caulking.
- Spray or brush hot plastics or pitch onto surfaces.
- Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
- Form a smooth foundation by stapling plywood or Masonite over the floor or by brushing waterproof compound onto surface and filling cracks with plaster, putty, or grout to seal pores.
- Roll and press sheet wall and floor covering into cement base to smooth and finish surface, using hand roller.
- Apply adhesive cement to floor or wall material to join and adhere foundation material.
- Cut flooring material to fit around obstructions.
- Inspect surface to be covered to ensure that it is firm and dry.
- Trim excess covering materials, tack edges, and join sections of covering material to form tight joint.
- Measure and mark guidelines on surfaces or foundations, using chalk lines and dividers.
- Cut covering and foundation materials, according to blueprints and sketches.
- Determine traffic areas and decide location of seams.
- Lay out, position, and apply shock-absorbing, sound-deadening, or decorative coverings to floors, walls, and cabinets, following guidelines to keep courses straight and create designs.
- Remove excess cement to clean finished surface.
- Disconnect and remove appliances, light fixtures, and worn floor and wall covering from floors, walls, and cabinets.
- Heat and soften floor covering materials to patch cracks or fit floor coverings around irregular surfaces, using blowtorch.
- Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
- Form a smooth foundation by stapling plywood or Masonite over the floor or by brushing waterproof compound onto surface and filling cracks with plaster, putty, or grout to seal pores.
- Roll and press sheet wall and floor covering into cement base to smooth and finish surface, using hand roller.
- Apply adhesive cement to floor or wall material to join and adhere foundation material.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Clean job sites.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
- Set up scaffolds.
- Determine materials needed to complete the job and place orders accordingly.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
- Cure freshly plastered surfaces.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Spray acoustic materials or texture finish over walls or ceilings.
- Mold or install ornamental plaster pieces, panels, or trim.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Apply glazes, icings, or other toppings to baked goods, using spatulas or brushes.
- Decorate baked goods, such as cakes or pastries.
- Check products for quality, and identify damaged or expired goods.
- Set oven temperatures, and place items into hot ovens for baking.
- Combine measured ingredients in bowls of mixing, blending, or cooking machinery.
- Place dough in pans, molds, or on sheets, and bake in production ovens or on grills.
- Set time and speed controls for mixing machines, blending machines, or steam kettles so that ingredients will be mixed or cooked according to instructions.
- Measure or weigh flour or other ingredients to prepare batters, doughs, fillings, or icings, using scales or graduated containers.
- Observe color of products being baked, and adjust oven temperatures, humidity, or conveyor speeds accordingly.
- Check the quality of raw materials to ensure that standards and specifications are met.
- Check equipment to ensure that it meets health and safety regulations, and perform maintenance or cleaning, as necessary.
- Adapt the quantity of ingredients to match the amount of items to be baked.
- Roll, knead, cut, or shape dough to form sweet rolls, pie crusts, tarts, cookies, or other products.
- Direct or coordinate bakery deliveries.
- Order or receive supplies or equipment.
- Prepare or maintain inventory or production records.
- Operate slicing or wrapping machines.
- Develop new recipes for baked goods.
- Apply glazes, icings, or other toppings to baked goods, using spatulas or brushes.
- Decorate baked goods, such as cakes or pastries.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Apply Masonite, formica, or vinyl surfacing materials.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Establish the specifications of articles to be constructed or repaired, or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Cut timber to the right size, and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Perform final touch-ups with sandpaper or steel wool.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Estimate the amounts, types, or costs of needed materials.
- Draw up detailed specifications and discuss projects with customers.
- Design furniture, using computer-aided drawing programs.
- Program computers to operate machinery.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Apply Masonite, formica, or vinyl surfacing materials.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
- Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
- Mold expansion joints and edges, using edging tools, jointers, and straightedge.
- Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
- Produce rough concrete surface, using broom.
- Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
- Operate power vibrator to compact concrete.
- Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
- Waterproof or restore concrete surfaces, using appropriate compounds.
- Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
- Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.
- Check the forms that hold the concrete to see that they are properly constructed.
- Set the forms that hold concrete to the desired pitch and depth, and align them.
- Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
- Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
- Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Build wooden molds, and clamp molds around area to be repaired, using hand tools.
- Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
- Fabricate concrete beams, columns, and panels.
- Polish surface, using polishing or surfacing machine.
- Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
- Push roller over surface to embed chips in surface.
- Apply muriatic acid to clean surface, and rinse with water.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
- Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
- Mold expansion joints and edges, using edging tools, jointers, and straightedge.
- Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
- Produce rough concrete surface, using broom.
- Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
- Operate power vibrator to compact concrete.
- Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
- Waterproof or restore concrete surfaces, using appropriate compounds.
- Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
- Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
- Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.
- Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
- Mold expansion joints and edges, using edging tools, jointers, or straightedges.
- Precast terrazzo blocks in wooden forms.
- Wet concrete surface and rub with stone to smooth surface and obtain specified finish.
- Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.
- Produce rough concrete surface, using broom.
- Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.
- Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.
- Grind surfaces with a power grinder, or polish surfaces with polishing or surfacing machines.
- Cut metal division strips and press them into the terrazzo base for joints or changes of color to form designs or patterns or to help prevent cracks.
- Blend marble chip mixtures, place into panels, and push a roller over the surface to embed the chips.
- Modify mixing, grouting, grinding, or cleaning procedures, according to type of installation or material used.
- Grind curved surfaces or areas inaccessible to surfacing machine, such as stairways or cabinet tops, with portable hand grinder.
- Position and secure moisture membrane and wire mesh in preparation for pouring base materials for terrazzo installation.
- Fill slight grinding depressions with matching grout material and hand-trowel for a smooth, uniform surface.
- Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.
- Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Chip, scrape, or grind high spots, ridges, or rough projections to finish concrete, using pneumatic chisel, hand chisel, or other hand tools.
- Move terrazzo installation materials, tools, machines, or work devices to work areas, manually or using wheelbarrow.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.
- Build wooden molds, clamping molds around areas to be repaired, or setting up frames to the proper depth and alignment.
- Remove frames when the foundation is dry.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
- Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.
- Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
- Mold expansion joints and edges, using edging tools, jointers, or straightedges.
- Precast terrazzo blocks in wooden forms.
- Wet concrete surface and rub with stone to smooth surface and obtain specified finish.
- Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.
- Produce rough concrete surface, using broom.
- Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.
- Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.
- Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.
- Press paper tape over joints to embed tape into sealing compound and to seal joints.
- Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.
- Use mechanical applicators that spread compounds and embed tape in one operation.
- Apply additional coats to fill in holes and make surfaces smooth.
- Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering.
- Sand or patch nicks or cracks in plasterboard or wallboard.
- Mix sealing compounds by hand or with portable electric mixers.
- Work on high ceilings, using scaffolding or other tools, such as stilts.
- Select the correct sealing compound or tape.
- Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers.
- Remove extra compound after surfaces have been covered sufficiently.
- Install metal molding at wall corners to secure wallboard.
- Check adhesives to ensure that they will work and will remain durable.
- Sand rough spots of dried cement between applications of compounds.
- Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.
- Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.
- Press paper tape over joints to embed tape into sealing compound and to seal joints.
- Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.
- Use mechanical applicators that spread compounds and embed tape in one operation.
- Apply sizing to seal surfaces and maximize adhesion of coverings to surfaces.
- Apply adhesives to the backs of paper strips, using brushes, or dunk strips of prepasted wallcovering in water, wiping off any excess adhesive.
- Apply thinned glue to waterproof porous surfaces, using brushes, rollers, or pasting machines.
- Mix paste, using paste powder and water, and brush paste onto surfaces.
- Apply acetic acid to damp plaster to prevent lime from bleeding through paper.
- Smooth strips or sections of paper with brushes or rollers to remove wrinkles and bubbles and to smooth joints.
- Trim rough edges from strips, using straightedges and trimming knives.
- Trim excess material at ceilings or baseboards, using knives.
- Check finished wallcoverings for proper alignment, pattern matching, and neatness of seams.
- Mark vertical guidelines on walls to align strips, using plumb bobs and chalk lines.
- Cover interior walls and ceilings of rooms with decorative wallpaper or fabric, using hand tools.
- Measure and cut strips from rolls of wallpaper or fabric, using shears or razors.
- Place strips or sections of paper on surfaces, aligning section edges and patterns.
- Fill holes, cracks, and other surface imperfections preparatory to covering surfaces.
- Measure surfaces or review work orders to estimate the quantities of materials needed.
- Smooth rough spots on walls and ceilings, using sandpaper.
- Set up equipment, such as pasteboards and scaffolds.
- Remove old paper, using water, steam machines, or solvents and scrapers.
- Staple or tack advertising posters onto fences, walls, billboards, or poles.
- Remove paint, varnish, dirt, and grease from surfaces, using paint remover and water soda solutions.
- Apply sizing to seal surfaces and maximize adhesion of coverings to surfaces.
- Apply adhesives to the backs of paper strips, using brushes, or dunk strips of prepasted wallcovering in water, wiping off any excess adhesive.
- Apply thinned glue to waterproof porous surfaces, using brushes, rollers, or pasting machines.
- Mix paste, using paste powder and water, and brush paste onto surfaces.
- Apply acetic acid to damp plaster to prevent lime from bleeding through paper.
- Remove damaged tile, brick, or mortar, and clean or prepare surfaces, using pliers, hammers, chisels, drills, wire brushes, or metal wire anchors.
- Provide assistance in the preparation, installation, repair, or rebuilding of tile, brick, or stone surfaces.
- Locate and supply materials to masons for installation, following drawings or numbered sequences.
- Apply caulk, sealants, or other agents to installed surfaces.
- Mix mortar, plaster, and grout, manually or using machines, according to standard formulas.
- Erect scaffolding or other installation structures.
- Cut materials to specified sizes for installation, using power saws or tile cutters.
- Modify material moving, mixing, grouting, grinding, polishing, or cleaning procedures, according to installation or material requirements.
- Transport materials, tools, or machines to installation sites, manually or using conveyance equipment.
- Arrange or store materials, machines, tools, or equipment.
- Clean installation surfaces, equipment, tools, work sites, or storage areas, using water, chemical solutions, oxygen lances, or polishing machines.
- Move or position materials such as marble slabs, using cranes, hoists, or dollies.
- Remove excess grout or residue from tile or brick joints, using sponges or trowels.
- Apply grout between joints of bricks or tiles, using grouting trowels.
- Correct surface imperfections or fill chipped, cracked, or broken bricks or tiles, using fillers, adhesives, or grouting materials.
- Remove damaged tile, brick, or mortar, and clean or prepare surfaces, using pliers, hammers, chisels, drills, wire brushes, or metal wire anchors.
- Provide assistance in the preparation, installation, repair, or rebuilding of tile, brick, or stone surfaces.
- Locate and supply materials to masons for installation, following drawings or numbered sequences.
- Apply caulk, sealants, or other agents to installed surfaces.
- Clean and paint completed tires.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Trim excess rubber and imperfections during retreading processes.
- Fill cuts and holes in tires, using hot rubber.
- Place tires into molds for new tread.
- Fit inner tubes and final layers of rubber onto tires.
- Buff tires according to specifications for width and undertread depth.
- Start rollers that bond tread and plies as drums revolve.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Roll camelbacks onto casings by hand, and cut camelbacks, using knives.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Measure tires to determine mold size requirements.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Cut plies at splice points, and press ends together to form continuous bands.
- Activate bead setters that press prefabricated beads onto plies.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Position rollers that turn ply edges under and over beads, or use steel rods to turn ply edges.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Clean and paint completed tires.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
- Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
- Measure and cut insulation for covering surfaces, using tape measures, handsaws, power saws, knives, or scissors.
- Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
- Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture, using saws, knives, rasps, trowels, blowers, or other tools and implements.
- Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
- Move controls, buttons, or levers to start blowers and regulate flow of materials through nozzles.
- Fill blower hoppers with insulating materials.
- Read blueprints, and select appropriate insulation, based on space characteristics and the heat retaining or excluding characteristics of the material.
- Remove old insulation, such as asbestos, following safety procedures.
- Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
- Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.
- Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
- Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement, or asphalt mastic.
- Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors.
- Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, tanks, and vessels, to help control noise and maintain temperatures.
- Select appropriate insulation, such as fiberglass, Styrofoam, or cork, based on the heat retaining or excluding characteristics of the material.
- Fit insulation around obstructions, and shape insulating materials and protective coverings as required.
- Determine the amounts and types of insulation needed, and methods of installation, based on factors such as location, surface shape, and equipment use.
- Install sheet metal around insulated pipes with screws to protect the insulation from weather conditions or physical damage.
- Read blueprints and specifications to determine job requirements.
- Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments or cement mortar.
- Remove or seal off old asbestos insulation, following safety procedures.
- Fill blower hoppers with insulating materials.
- Move controls, buttons, or levers to start blowers, and to regulate flow of materials through nozzles.
- Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.
- Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement, or asphalt mastic.
- Paint or lacquer patterns.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers.
- Set up and operate machine tools, such as milling machines, lathes, drill presses, and grinders, to machine castings or patterns.
- Repair and rework templates and patterns.
- Assemble pattern sections, using hand tools, bolts, screws, rivets, glue, or welding equipment.
- Read and interpret blueprints or drawings of parts to be cast or patterns to be made, compute dimensions, and plan operational sequences.
- Construct platforms, fixtures, and jigs for holding and placing patterns.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Mark identification numbers or symbols onto patterns or templates.
- Program computerized numerical control machine tools.
- Create computer models of patterns or parts, using modeling software.
- Design and create templates, patterns, or coreboxes according to work orders, sample parts, or mockups.
- Lay out and draw or scribe patterns onto material, using compasses, protractors, rulers, scribes, or other instruments.
- Select pattern materials such as wood, resin, and fiberglass.
- Paint or lacquer patterns.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Dress grinding wheels, according to specifications.
- Monitor machine operations to determine whether adjustments are necessary, stopping machines when problems occur.
- Inspect, feel, and measure workpieces to ensure that surfaces and dimensions meet specifications.
- Study blueprints or layouts of metal workpieces to determine grinding procedures, and to plan machine setups and operational sequences.
- Select and mount grinding wheels on machines, according to specifications, using hand tools and applying knowledge of abrasives and grinding procedures.
- Compute numbers, widths, and angles of cutting tools, micrometers, scales, and gauges, and adjust tools to produce specified cuts.
- Turn valves to direct flow of coolant against cutting wheels and workpieces during grinding.
- Set up and operate grinding or polishing machines to grind metal workpieces, such as dies, parts, and tools.
- File or finish surfaces of workpieces, using prescribed hand tools.
- Perform basic maintenance, such as cleaning and lubricating machine parts.
- Remove finished workpieces from machines and place them in boxes or on racks, setting aside pieces that are defective.
- Remove and replace worn or broken machine parts, using hand tools.
- Fit parts together in pre-assembly to ensure that dimensions are accurate.
- Attach workpieces to grinding machines and form specified sections and repair cracks, using welding or brazing equipment.
- Duplicate workpiece contours, using tracer attachments.
- Inspect dies to detect defects, assess wear, and verify specifications, using micrometers, steel gauge pins, and loupes.
- Straighten workpieces and remove dents, using straightening presses and hammers.
- Place workpieces in electroplating solutions or apply pigments to surfaces of workpieces to highlight ridges and grooves.
- Dress grinding wheels, according to specifications.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Press buttons to activate cleaning equipment or machines.
- Connect hoses or lines to pumps or other equipment.
- Collect and test samples of cleaning solutions or vapors.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Operate or tend wire-coiling machines to wind wire coils used in electrical components such as resistors and transformers, and in electrical equipment and instruments such as bobbins and generators.
- Attach, alter, and trim materials such as wire, insulation, and coils, using hand tools.
- Cut, strip, and bend wire leads at ends of coils, using pliers and wire scrapers.
- Review work orders and specifications to determine materials needed and types of parts to be processed.
- Select and load materials such as workpieces, objects, and machine parts onto equipment used in coiling processes.
- Record production and operational data on specified forms.
- Stop machines to remove completed components, using hand tools.
- Examine and test wired electrical components such as motors, armatures, and stators, using measuring devices, and record test results.
- Line slots with sheet insulation, and insert coils into slots.
- Disassemble and assemble motors, and repair and maintain electrical components and machinery parts, using hand tools.
- Apply solutions or paints to wired electrical components, using hand tools, and bake components.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Melt or heat coating materials to specified temperatures.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Apply pigment to layout surfaces, using paint brushes.
- Mark curves, lines, holes, dimensions, and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
- Plan locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
- Fit and align fabricated parts to be welded or assembled.
- Locate center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
- Plan and develop layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
- Lay out and fabricate metal structural parts such as plates, bulkheads, and frames.
- Compute layout dimensions, and determine and mark reference points on metal stock or workpieces for further processing, such as welding and assembly.
- Lift and position workpieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
- Design and prepare templates of wood, paper, or metal.
- Install doors, hatches, brackets, and clips.
- Brace parts in position within hulls or ships for riveting or welding.
- Inspect machined parts to verify conformance to specifications.
- Add dimensional details to blueprints or drawings made by other workers.
- Apply pigment to layout surfaces, using paint brushes.
- Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax.
- Verify dimensions and contours of models during hand-forming processes, using templates and measuring devices.
- Read blueprints, drawings, or written specifications, and consult with designers to determine sizes and shapes of patterns and required machine setups.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and planers to cut and shape sections, parts, and patterns, according to specifications.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, screws, and other fasteners.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Select wooden stock, determine layouts, and mark layouts of parts on stock, using precision equipment such as scribers, squares, and protractors.
- Construct wooden models, patterns, templates, full scale mock-ups, and molds for parts of products and production tools.
- Mark identifying information on patterns, parts, and templates to indicate assembly methods and details.
- Plan, lay out, and draw outlines of units, sectional patterns, or full-scale mock-ups of products.
- Fabricate work aids such as scrapers or templates.
- Maintain pattern records for reference.
- Build jigs that can be used as guides for assembling oversized or special types of box shooks.
- Issue patterns to designated machine operators.
- Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Inspect the surface to be covered to determine its condition, and correct any imperfections that might show through carpet or cause carpet to wear unevenly.
- Roll out, measure, mark, and cut carpeting to size with a carpet knife, following floor sketches and allowing extra carpet for final fitting.
- Join edges of carpet and seam edges where necessary, by sewing or by using tape with glue and heated carpet iron.
- Cut and trim carpet to fit along wall edges, openings, and projections, finishing the edges with a wall trimmer.
- Plan the layout of the carpet, allowing for expected traffic patterns and placing seams for best appearance and longest wear.
- Stretch carpet to align with walls and ensure a smooth surface, and press carpet in place over tack strips or use staples, tape, tacks or glue to hold carpet in place.
- Take measurements and study floor sketches to calculate the area to be carpeted and the amount of material needed.
- Install carpet on some floors using adhesive, following prescribed method.
- Clean up before and after installation, including vacuuming carpet and discarding remnant pieces.
- Measure, cut and install tackless strips along the baseboard or wall.
- Nail tack strips around area to be carpeted or use old strips to attach edges of new carpet.
- Cut carpet padding to size and install padding, following prescribed method.
- Fasten metal treads across door openings or where carpet meets flooring to hold carpet in place.
- Draw building diagrams and record dimensions.
- Move furniture from area to be carpeted and remove old carpet and padding.
- Cut and bind material.
- Inspect the surface to be covered to determine its condition, and correct any imperfections that might show through carpet or cause carpet to wear unevenly.
- Paint structures as specified, using paint sprayers.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Instruct customers in the installation, repair, or maintenance of products.
- Paint structures as specified, using paint sprayers.
- Finish completed products or models with shellac, lacquer, wax, or paint.
- Read blueprints, drawings, or written specifications to determine sizes and shapes of patterns and required machine setups.
- Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, and screws.
- Lay out patterns on wood stock and draw outlines of units, sectional patterns, or full-scale mock-ups of products, based on blueprint specifications and sketches, and using marking and measuring devices.
- Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools.
- Divide patterns into sections according to shapes of castings to facilitate removal of patterns from molds.
- Verify dimensions of completed patterns, using templates, straightedges, calipers, or protractors.
- Correct patterns to compensate for defects in castings.
- Set up, operate, and adjust a variety of woodworking machines such as bandsaws and lathes to cut and shape sections, parts, and patterns, according to specifications.
- Estimate costs for patternmaking jobs.
- Mark identifying information such as colors or codes on patterns, parts, and templates to indicate assembly methods.
- Repair broken or damaged patterns.
- Maintain pattern records for reference.
- Glue fillets along interior angles of patterns.
- Construct wooden models, templates, full scale mock-ups, jigs, or molds for shaping parts of products.
- Compute dimensions, areas, volumes, and weights.
- Select lumber to be used for patterns.
- Collect and store patterns and lumber.
- Inventory equipment and supplies, ordering parts and tools as necessary.
- Issue patterns to designated machine operators.
- Finish completed products or models with shellac, lacquer, wax, or paint.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Operate gas or electric kilns to fire pottery pieces.
- Raise and shape clay into wares, such as vases and pitchers, on revolving wheels, using hands, fingers, and thumbs.
- Adjust wheel speeds according to the feel of the clay as pieces enlarge and walls become thinner.
- Position balls of clay in centers of potters' wheels, and start motors or pump treadles with feet to revolve wheels.
- Move pieces from wheels so that they can dry.
- Prepare work for sale or exhibition, and maintain relationships with retail, pottery, art, and resource networks that can facilitate sale or exhibition of work.
- Attach handles to pottery pieces.
- Press thumbs into centers of revolving clay to form hollows, and press on the inside and outside of emerging clay cylinders with hands and fingers, gradually raising and shaping clay to desired forms and sizes.
- Pack and ship pottery to stores or galleries for retail sale.
- Smooth surfaces of finished pieces, using rubber scrapers and wet sponges.
- Pull wires through bases of articles and wheels to separate finished pieces.
- Design spaces to display pottery for sale.
- Verify accuracy of shapes and sizes of objects, using calipers and templates.
- Examine finished ware for defects and measure dimensions, using rule and thickness gauge.
- Maintain supplies of tools, equipment, and materials, and order additional supplies as needed.
- Operate pug mills to blend and extrude clay.
- Perform test-fires of pottery to determine how to achieve specific colors and textures.
- Start machine units and conveyors and observe lights and gauges on panel board to verify operational efficiency.
- Operate drying chambers to dry or finish molded ceramic ware.
- Adjust pressures, temperatures, and trimming tool settings as required.
- Design clay forms and molds, and decorations for forms.
- Teach pottery classes.
- Operate jigger machines to form ceramic ware, such as bowls, cups, plates, and saucers.
- Mix and apply glazes to pottery pieces, using tools, such as spray guns.
- Apply color to edges of signatures using brushes, pads, or atomizers.
- Examine stitched, collated, bound, or unbound product samples for defects, such as imperfect bindings, ink spots, torn pages, loose pages, or loose or uncut threads.
- Read work orders to determine instructions and specifications for machine set-up.
- Install or adjust bindery machine devices, such as knives, guides, rollers, rounding forms, creasing rams, or clamps, to accommodate sheets, signatures, or books of specified sizes.
- Trim edges of books to size, using cutting machines, book trimming machines, or hand cutters.
- Stitch or glue endpapers, bindings, backings, or signatures, using sewing machines, glue machines, or glue and brushes.
- Monitor machine operations to detect malfunctions or to determine whether adjustments are needed.
- Maintain records, such as daily production records, using specified forms.
- Lubricate, clean, or make minor repairs to machine parts to keep machines in working condition.
- Set up or operate bindery machines, such as coil binders, thermal or tape binders, plastic comb binders, or specialty binders.
- Set up or operate machines that perform binding operations, such as pressing, folding, or trimming.
- Prepare finished books for shipping by wrapping or packing books and stacking boxes on pallets.
- Set up or operate glue machines by filling glue reservoirs, turning switches to activate heating elements, or adjusting glue flow or conveyor speed.
- Train workers to set up, operate, and use automatic bindery machines.
- Insert book bodies in devices that form back edges of books into convex shapes and produce grooves that facilitate cover attachment.
- Cut cover material to specified dimensions, fitting and gluing material to binder boards by hand or machine.
- Cut binder boards to specified dimensions, using board shears, hand cutters, or cutting machines.
- Bind new books, using hand tools such as bone folders, knives, hammers, or brass binding tools.
- Perform highly skilled hand finishing binding operations, such as grooving or lettering.
- Imprint or emboss lettering, designs, or numbers on book covers, using gold, silver, or colored foil, and stamping machines.
- Compress sewed or glued signatures, using hand presses or smashing machines.
- Meet with clients, printers, or designers to discuss job requirements or binding plans.
- Form book bodies by folding and sewing printed sheets to form signatures and assembling signatures in numerical order.
- Design original or special bindings for limited editions or other custom binding projects.
- Punch holes in and fasten paper sheets, signatures, or other material, using hand or machine punches and staplers.
- Repair, restore, or rebind old, rare, or damaged books, using hand tools.
- Apply color to edges of signatures using brushes, pads, or atomizers.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Position stones and metal pieces, and set, mount, and secure items in place, using setting and hand tools.
- Smooth soldered joints and rough spots, using hand files and emery paper, and polish smoothed areas with polishing wheels or buffing wire.
- Create jewelry from materials such as gold, silver, platinum, and precious or semiprecious stones.
- Make repairs, such as enlarging or reducing ring sizes, soldering pieces of jewelry together, and replacing broken clasps and mountings.
- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Select and acquire metals and gems for designs.
- Compute costs of labor and materials to determine production costs of products and articles.
- Examine assembled or finished products to ensure conformance to specifications, using magnifying glasses or precision measuring instruments.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Construct preliminary models of wax, metal, clay, or plaster, and form sample castings in molds.
- Pour molten metal alloys or other materials into molds to cast models of jewelry.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Soften metal to be used in designs by heating it with a gas torch and shape it, using hammers and dies.
- Determine appraised values of diamonds and other gemstones based on price guides, market fluctuations, and stone grades and rarity.
- Grade stones based on their color, perfection, and quality of cut.
- Write or modify design specifications such as the metal contents and weights of items.
- Create new jewelry designs and modify existing designs, using computers as necessary.
- Buy and sell jewelry, or serve as agents between buyers and sellers.
- Record the weights and processing times of finished pieces.
- Lay out designs on metal stock, and cut along markings to fabricate pieces used to cast metal molds.
- Mark, engrave, or emboss designs on metal pieces such as castings, wire, or jewelry, following specifications.
- Cut designs in molds or other materials to be used as models in the fabrication of metal and jewelry products.
- Design and fabricate molds, models, and machine accessories, and modify hand tools used to cast metal and jewelry pieces.
- Research and analyze reference materials, and consult with interested parties to develop new products or modify existing designs.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Weigh, mix, and melt metal alloys or materials needed for jewelry models.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Rout out locations where parts are to be joined to items, using routing machines.
- Plate articles such as jewelry pieces and watch dials, using silver, gold, nickel, or other metals.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Load articles into washers or dry-cleaning machines, or direct other workers to perform loading.
- Start washers, dry cleaners, driers, or extractors, and turn valves or levers to regulate machine processes and the volume of soap, detergent, water, bleach, starch, and other additives.
- Operate extractors and driers, or direct their operation.
- Remove items from washers or dry-cleaning machines, or direct other workers to do so.
- Sort and count articles removed from dryers, and fold, wrap, or hang them.
- Clean machine filters, and lubricate equipment.
- Examine and sort into lots articles to be cleaned, according to color, fabric, dirt content, and cleaning technique required.
- Receive and mark articles for laundry or dry cleaning with identifying code numbers or names, using hand or machine markers.
- Apply bleaching powders to spots and spray them with steam to remove stains from fabrics that do not respond to other cleaning solvents.
- Determine spotting procedures and proper solvents, based on fabric and stain types.
- Spray steam, water, or air over spots to flush out chemicals, dry material, raise naps, or brighten colors.
- Pre-soak, sterilize, scrub, spot-clean, and dry contaminated or stained articles, using neutralizer solutions and portable machines.
- Mix bleaching agents with hot water in vats, and soak material until it is bleached.
- Apply chemicals to neutralize the effects of solvents.
- Mix and add detergents, dyes, bleaches, starches, and other solutions and chemicals to clean, color, dry, or stiffen articles.
- Sprinkle chemical solvents over stains, and pat areas with brushes or sponges to remove stains.
- Match sample colors, applying knowledge of bleaching agent and dye properties, and types, construction, conditions, and colors of articles.
- Inspect soiled articles to determine sources of stains, to locate color imperfections, and to identify items requiring special treatment.
- Operate dry-cleaning machines to clean soiled articles.
- Operate machines that comb, dry and polish furs, clean, sterilize and fluff feathers and blankets, or roll and package towels.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Hang curtains, drapes, blankets, pants, and other garments on stretch frames to dry.
- Clean fabrics, using vacuums or air hoses.
- Test fabrics in inconspicuous places to determine whether solvents will damage dyes or fabrics.
- Rinse articles in water and acetic acid solutions to remove excess dye and to fix colors.
- Identify articles' fabrics and original dyes by sight and touch, or by testing samples with fire or chemical reagents.
- Start pumps to operate distilling systems that drain and reclaim dry cleaning solvents.
- Immerse articles in bleaching baths to strip colors.
- Spread soiled articles on work tables, and position stained portions over vacuum heads or on marble slabs.
- Mend and sew articles, using hand stitching, adhesive patches, or sewing machines.
- Dye articles to change or restore their colors, using knowledge of textile compositions and the properties and effects of bleaches and dyes.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.