- Operate consoles to control automatic palletizing equipment.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 5 | 5 | 1-2 | 53-7041.00 | Hoist and Winch Operators |
| 2 | 5 | 1-2 | 51-9198.00 | Helpers--Production Workers |
| 2 | 2 | 1-2 | 51-2023.00 | Electromechanical Equipment Assemblers
|
| 2 | 2 | 1-2 | 53-7062.00 | Laborers and Freight, Stock, and Material Movers, Hand Bright Outlook
|
| 2 | 2 | 1-2 | 49-9096.00 | Riggers |
| 2 | 2 | 1-2 | 47-5011.00 | Derrick Operators, Oil and Gas |
| 2 | 2 | 1-2 | 47-4041.00 | Hazardous Materials Removal Workers |
| 2 | 2 | 1-2 | 47-5013.00 | Service Unit Operators, Oil and Gas |
| 2 | 2 | 1-2 | 47-2221.00 | Structural Iron and Steel Workers |
| 2 | 2 | 1-2 | 47-5012.00 | Rotary Drill Operators, Oil and Gas |
| 2 | 2 | 3 | 49-9092.00 | Commercial Divers Bright Outlook
|
| 2 | 2 | 1-2 | 47-2121.00 | Glaziers |
| 2 | 2 | 1-2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
| 1 | 5 | 1-2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
| 1 | 4 | 1-2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 3 | 1-2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
| 1 | 3 | 1-2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
| 1 | 2 | 1-2 | 53-7051.00 | Industrial Truck and Tractor Operators |
| 1 | 2 | 1-2 | 53-7081.00 | Refuse and Recyclable Material Collectors |
| 1 | 2 | 1-2 | 53-7121.00 | Tank Car, Truck, and Ship Loaders |
| 1 | 2 | 1-2 | 49-9044.00 | Millwrights |
| 1 | 2 | 1-2 | 51-6011.00 | Laundry and Dry-Cleaning Workers |
| 1 | 2 | 3 | 49-3011.00 | Aircraft Mechanics and Service Technicians Bright Outlook
|
| 1 | 1 | 1-2 | 47-2072.00 | Pile Driver Operators |
| 1 | 1 | 1-2 | 53-7031.00 | Dredge Operators |
| 1 | 1 | 1-2 | 47-2171.00 | Reinforcing Iron and Rebar Workers |
| 1 | 1 | 1-2 | 51-9192.00 | Cleaning, Washing, and Metal Pickling Equipment Operators and Tenders |
| 1 | 1 | 3 | 53-7021.00 | Crane and Tower Operators |
| 1 | 1 | 1-2 | 47-5071.00 | Roustabouts, Oil and Gas |
| 1 | 1 | 1-2 | 47-5041.00 | Continuous Mining Machine Operators |
| 1 | 1 | 1-2 | 47-3011.00 | Helpers--Brickmasons, Blockmasons, Stonemasons, and Tile and Marble Setters |
| 1 | 1 | 1-2 | 51-4051.00 | Metal-Refining Furnace Operators and Tenders |
| 1 | 1 | 1-2 | 47-2022.00 | Stonemasons |
| 1 | 1 | 1-2 | 17-3029.01 | Non-Destructive Testing Specialists |
| 1 | 1 | 3 | 17-3027.01 | Automotive Engineering Technicians |
| 1 | 1 | 1-2 | 47-2011.00 | Boilermakers |
| 1 | 1 | 3 | 49-9043.00 | Maintenance Workers, Machinery |
| 1 | 1 | 1-2 | 53-7061.00 | Cleaners of Vehicles and Equipment |
| 1 | 1 | 1-2 | 49-9052.00 | Telecommunications Line Installers and Repairers |
| 1 | 1 | 1-2 | 49-9051.00 | Electrical Power-Line Installers and Repairers Bright Outlook
|
| 1 | 1 | 1-2 | 47-2081.00 | Drywall and Ceiling Tile Installers |
| 1 | 1 | 3 | 17-3029.08 | Photonics Technicians |
| 1 | 1 | 4 | 17-2199.08 | Robotics Engineers |
| 1 | 1 | 1-2 | 53-5011.00 | Sailors and Marine Oilers |
| 1 | 1 | 3 | 51-8021.00 | Stationary Engineers and Boiler Operators |
| 1 | 1 | 1-2 | 49-3093.00 | Tire Repairers and Changers |
| 1 | 1 | 1-2 | 51-7042.00 | Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
| 1 | 1 | 3 | 49-3031.00 | Bus and Truck Mechanics and Diesel Engine Specialists |
| 1 | 1 | 4 | 17-2141.01 | Fuel Cell Engineers Bright Outlook
|
| 1 | 1 | 4 | 17-2199.07 | Photonics Engineers |
| 1 | 1 | 1-2 | 47-4061.00 | Rail-Track Laying and Maintenance Equipment Operators |
| 1 | 1 | 1-2 | 47-5032.00 | Explosives Workers, Ordnance Handling Experts, and Blasters |
| 1 | 1 | 3 | 49-9071.00 | Maintenance and Repair Workers, General Bright Outlook
|
| 1 | 1 | 1-2 | 47-5023.00 | Earth Drillers, Except Oil and Gas |
| 1 | 1 | 3 | 17-3024.00 | Electro-Mechanical and Mechatronics Technologists and Technicians |
| 1 | 1 | 3 | 17-3026.00 | Industrial Engineering Technologists and Technicians |
| 1 | 1 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
| 1 | 1 | 3 | 49-9021.00 | Heating, Air Conditioning, and Refrigeration Mechanics and Installers Bright Outlook
|
| 1 | 1 | 3 | 49-2021.00 | Radio, Cellular, and Tower Equipment Installers and Repairers |
- Start engines of hoists or winches and use levers and pedals to wind or unwind cable on drums.
- Apply hand or foot brakes and move levers to lock hoists or winches.
- Tend auxiliary equipment, such as jacks, slings, cables, or stop blocks, to facilitate moving items or materials for further processing.
- Move levers, pedals, and throttles to stop, start, and regulate speeds of hoist or winch drums in response to hand, bell, buzzer, telephone, loud-speaker, or whistle signals, or by observing dial indicators or cable marks.
- Operate compressed air, diesel, electric, gasoline, or steam-driven hoists or winches to control movement of cableways, cages, derricks, draglines, loaders, railcars, or skips.
- Signal and assist other workers loading or unloading materials.
- Observe equipment gauges and indicators and hand signals of other workers to verify load positions or depths.
- Repair, maintain, and adjust equipment, using hand tools.
- Select loads or materials according to weight and size specifications.
- Move or reposition hoists, winches, loads and materials, manually or using equipment and machines such as trucks, cars, and hand trucks.
- Attach, fasten, and disconnect cables or lines to loads, materials, and equipment, using hand tools.
- Oil winch drums so that cables will wind smoothly.
- Climb ladders to position and set up vehicle-mounted derricks.
- Start engines of hoists or winches and use levers and pedals to wind or unwind cable on drums.
- Apply hand or foot brakes and move levers to lock hoists or winches.
- Tend auxiliary equipment, such as jacks, slings, cables, or stop blocks, to facilitate moving items or materials for further processing.
- Move levers, pedals, and throttles to stop, start, and regulate speeds of hoist or winch drums in response to hand, bell, buzzer, telephone, loud-speaker, or whistle signals, or by observing dial indicators or cable marks.
- Operate compressed air, diesel, electric, gasoline, or steam-driven hoists or winches to control movement of cableways, cages, derricks, draglines, loaders, railcars, or skips.
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Mark or tag identification on parts.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Count finished products to determine if product orders are complete.
- Examine products to verify conformance to quality standards.
- Load and unload items from machines, conveyors, and conveyances.
- Remove products, machine attachments, or waste material from machines.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Pack and store materials and products.
- Wash work areas, machines, equipment, vehicles, or products.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Prepare raw materials for processing.
- Read gauges or charts, and record data obtained.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Signal coworkers to direct them to move products during the production process.
- Position spouts or chutes of storage bins so that containers can be filled.
- Break up defective products for reprocessing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Fold products and product parts during processing.
- Cut or break flashing from materials or products.
- Change machine gears, using wrenches.
- Clean and lubricate equipment.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Operate machinery used in the production process, or assist machine operators.
- Start machines or equipment to begin production processes.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Operate small cranes to transport or position large parts.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Pack or fold insulation between panels.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Operate small cranes to transport or position large parts.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Maintain equipment storage areas to ensure that inventory is protected.
- Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
- Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
- Install protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Sort cargo before loading and unloading.
- Attach identifying tags to containers or mark them with identifying information.
- Record numbers of units handled or moved, using daily production sheets or work tickets.
- Carry needed tools or supplies from storage or trucks and return them after use.
- Pack containers and re-pack damaged containers.
- Assemble product containers or crates, using hand tools and precut lumber.
- Connect electrical equipment to power sources so that it can be tested before use.
- Inspect products for damage or leaks.
- Attach slings, hooks, or other devices to lift cargo and guide loads.
- Adjust controls to guide, position, or move equipment, such as cranes, booms, or cameras.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Test rigging to ensure safety and reliability.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Tilt, dip, and turn suspended loads to maneuver over, under, or around obstacles, using multi-point suspension techniques.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Dismantle and store rigging equipment after use.
- Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
- Align, level, and anchor machinery.
- Load machines onto trucks to prepare for transportation.
- Attach pulleys and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms, using bolts and clamps.
- Fabricate, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
- Clean and dress machine surfaces and component parts.
- Install ground rigging for yarding lines, attaching chokers to logs and to the lines.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Clamp holding fixtures on ends of hoisting cables.
- String cables through pulleys and blocks.
- Start pumps that circulate mud through drill pipes and boreholes to cool drill bits and flush out drill cuttings.
- Control the viscosity and weight of the drilling fluid.
- Listen to mud pumps and check regularly for vibration and other problems to ensure that rig pumps and drilling mud systems are working properly.
- Inspect derricks, or order their inspection, prior to being raised or lowered.
- Prepare mud reports, and instruct crews about the handling of any chemical additives.
- Position and align derrick elements, using harnesses and platform climbing devices.
- Inspect derricks for flaws, and clean and oil derricks to maintain proper working conditions.
- Supervise crew members, and provide assistance in training them.
- Repair pumps, mud tanks, and related equipment.
- Steady pipes during connection to or disconnection from drill or casing strings.
- Weigh clay, and mix with water and chemicals to make drilling mud, using portable mixers.
- Guide lengths of pipe into and out of elevators.
- Set and bolt crown blocks to posts at tops of derricks.
- Clamp holding fixtures on ends of hoisting cables.
- String cables through pulleys and blocks.
- Load or unload materials into containers or onto trucks, using hoists or forklifts.
- Operate cranes to move or load baskets, casks, or canisters.
- Remove asbestos or lead from surfaces, using hand or power tools such as scrapers, vacuums, or high-pressure sprayers.
- Build containment areas prior to beginning abatement or decontamination work.
- Prepare hazardous material for removal or storage.
- Comply with prescribed safety procedures or federal laws regulating waste disposal methods.
- Record numbers of containers stored at disposal sites, specifying amounts or types of equipment or waste disposed.
- Clean contaminated equipment or areas for reuse, using detergents or solvents, sandblasters, filter pumps, or steam cleaners.
- Clean mold-contaminated sites by removing damaged porous materials or thoroughly cleaning all contaminated nonporous materials.
- Operate machines or equipment to remove, package, store, or transport loads of waste materials.
- Sort specialized hazardous waste at landfills or disposal centers, following proper disposal procedures.
- Identify asbestos, lead, or other hazardous materials to be removed, using monitoring devices.
- Remove or limit contamination following emergencies involving hazardous substances.
- Organize or track the locations of hazardous items in landfills.
- Drive trucks or other heavy equipment to convey contaminated waste to designated sea or ground locations.
- Identify or separate waste products or materials for recycling or reuse.
- Process e-waste, such as computer components containing lead or mercury.
- Apply bioremediation techniques to hazardous wastes to allow naturally occurring bacteria to break down toxic substances.
- Mix or pour concrete into forms to encase waste material for disposal.
- Load or unload materials into containers or onto trucks, using hoists or forklifts.
- Operate cranes to move or load baskets, casks, or canisters.
- Operate controls that raise derricks or level rigs.
- Thread cables through derrick pulleys, using hand tools.
- Maintain and perform safety inspections on equipment and tools.
- Listen to engines, rotary chains, or other equipment to detect faulty operations or unusual well conditions.
- Prepare reports of services rendered, tools used, or time required, for billing purposes.
- Install pressure-control devices onto wellheads.
- Confer with others to gather information regarding pipe or tool sizes or borehole conditions in wells.
- Operate pumps that circulate water, oil, or other fluids through wells to remove sand or other materials obstructing the free flow of oil.
- Drive truck-mounted units to well sites.
- Interpret instrument readings to ascertain the depth of obstruction.
- Select fishing methods or tools for removing obstacles such as liners, broken casing, screens, or drill pipe.
- Close and seal wells no longer in use.
- Direct drilling crews performing activities such as assembling and connecting pipe, applying weights to drill pipes, or drilling around lodged obstacles.
- Apply green technologies or techniques, such as the use of coiled tubing, slim-hole drilling, horizontal drilling, hydraulic fracturing, or gas lift systems.
- Operate specialized equipment to remove obstructions by backing off or severing pipes by chemical or explosive action.
- Perforate well casings or sidewalls of boreholes with explosive charges.
- Examine unserviceable wells to determine actions to be taken to improve well conditions.
- Monitor sound wave-generating or detecting mechanisms to determine well fluid levels.
- Insert detection instruments into wells with obstructions.
- Operate controls that raise derricks or level rigs.
- Thread cables through derrick pulleys, using hand tools.
- Lift steel beams, girders, or columns using cranes or forklifts, or by signaling hoisting equipment operators to lift or position structural steel members.
- Fasten structural steel members to hoist cables, using chains, cables, or rope.
- Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
- Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
- Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
- Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
- Assemble or inspect hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
- Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
- Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
- Pull, push, or pry structural steel members into approximate positions for bolting into place.
- Unload and position prefabricated steel units for hoisting, as needed.
- Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
- Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.
- Ride on girders or other structural steel members to position them, or use rope to guide them into position.
- Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously placed members.
- Dismantle structures or equipment.
- Insert sealing strips, wiring, insulating material, ladders, flanges, gauges, or valves, depending on types of structures being assembled.
- Place blocks under reinforcing bars used to reinforce floors.
- Hold rivets while riveters use air hammers to form heads on rivets.
- Catch hot rivets in buckets and insert rivets in holes, using tongs.
- Lift steel beams, girders, or columns using cranes or forklifts, or by signaling hoisting equipment operators to lift or position structural steel members.
- Fasten structural steel members to hoist cables, using chains, cables, or rope.
- Push levers and brake pedals to control gasoline, diesel, electric, or steam draw works that lower and raise drill pipes and casings in and out of wells.
- Locate and recover lost or broken bits, casings, and drill pipes from wells, using special tools.
- Train crews, and introduce procedures to make drill work more safe and effective.
- Observe pressure gauge and move throttles and levers to control the speed of rotary tables, and to regulate pressure of tools at bottoms of boreholes.
- Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered, and time required.
- Connect sections of drill pipe, using hand tools and powered wrenches and tongs.
- Count sections of drill rod to determine depths of boreholes.
- Maintain and adjust machinery to ensure proper performance.
- Direct rig crews in drilling and other activities, such as setting up rigs and completing or servicing wells.
- Weigh clay, and mix with water and chemicals to make drilling mud.
- Start and examine operation of slush pumps to ensure circulation and consistency of drilling fluid or mud in well.
- Clean and oil pulleys, blocks, and cables.
- Monitor progress of drilling operations, and select and change drill bits according to the nature of strata, using hand tools.
- Repair or replace defective parts of machinery, such as rotary drill rigs, water trucks, air compressors, and pumps, using hand tools.
- Line drilled holes with pipes, and install all necessary hardware, to prepare new wells.
- Cap wells with packers, or turn valves, to regulate outflow of oil from wells.
- Remove core samples during drilling to determine the nature of the strata being drilled.
- Bolt together pump and engine parts, and connect tanks and flow lines.
- Plug observation wells, and restore sites.
- Position and prepare truck-mounted derricks at drilling areas specified on field maps.
- Lower and explode charges in boreholes to start flow of oil from wells.
- Inspect safety equipment, such as harnesses, belts, and lifelines, before use.
- Push levers and brake pedals to control gasoline, diesel, electric, or steam draw works that lower and raise drill pipes and casings in and out of wells.
- Locate and recover lost or broken bits, casings, and drill pipes from wells, using special tools.
- Recover objects by placing rigging around sunken objects, hooking rigging to crane lines, and operating winches, derricks, or cranes to raise objects.
- Salvage wrecked ships or their cargo, using pneumatic power velocity and hydraulic tools and explosive charges, when necessary.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Take appropriate safety precautions, such as monitoring dive lengths and depths and registering with authorities before diving expeditions begin.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Descend into water with the aid of diver helpers, using scuba gear or diving suits.
- Inspect and test docks, ships, buoyage systems, plant intakes or outflows, or underwater pipelines, cables, or sewers, using closed circuit television, still photography, and testing equipment.
- Obtain information about diving tasks and environmental conditions.
- Inspect the condition of underwater steel or wood structures.
- Operate underwater video, sonar, recording, or related equipment to investigate underwater structures or marine life.
- Repair ships, bridge foundations, or other structures below the water line, using caulk, bolts, and hand tools.
- Cut and weld steel, using underwater welding equipment, jigs, and supports.
- Carry out non-destructive testing, such as tests for cracks on the legs of oil rigs at sea.
- Take test samples or photographs to assess the condition of vessels or structures.
- Supervise or train other divers, including hobby divers.
- Perform activities related to underwater search and rescue, salvage, recovery, or cleanup operations.
- Install, inspect, clean, or repair piping or valves.
- Set or guide placement of pilings or sandbags to provide support for structures, such as docks, bridges, cofferdams, or platforms.
- Install pilings or footings for piers or bridges.
- Remove obstructions from strainers or marine railway or launching ways, using pneumatic or power hand tools.
- Drill holes in rock and rig explosives for underwater demolitions.
- Remove rubbish or pollution from the sea.
- Perform offshore oil or gas exploration or extraction duties, such as conducting underwater surveys or repairing and maintaining drilling rigs or platforms.
- Cultivate or harvest marine species or perform routine work on fish farms.
- Recover objects by placing rigging around sunken objects, hooking rigging to crane lines, and operating winches, derricks, or cranes to raise objects.
- Salvage wrecked ships or their cargo, using pneumatic power velocity and hydraulic tools and explosive charges, when necessary.
- Operate cranes or hoists with suction cups to lift large, heavy pieces of glass.
- Load and arrange glass or mirrors onto delivery trucks, using suction cups or cranes to lift glass.
- Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required.
- Determine plumb of walls or ceilings, using plumb lines and levels.
- Install pre-assembled metal or wood frameworks for windows or doors to be fitted with glass panels, using hand tools.
- Fabricate or install metal sashes or moldings for glass installation, using aluminum or steel framing.
- Set glass doors into frames and bolt metal hinges, handles, locks, or other hardware to attach doors to frames and walls.
- Cut, fit, install, repair, or replace glass or glass substitutes, such as plastic or aluminum, in building interiors or exteriors or in furniture or other products.
- Drive trucks to installation sites and unload mirrors, glass equipment, or tools.
- Measure mirrors and dimensions of areas to be covered to determine work procedures.
- Cut and attach mounting strips, metal or wood moldings, rubber gaskets, or metal clips to surfaces in preparation for mirror installation.
- Pack spaces between moldings and glass with glazing compounds and trim excess material with glazing knives.
- Assemble, erect, or dismantle scaffolds, rigging, or hoisting equipment.
- Cut and remove broken glass prior to installing replacement glass.
- Secure mirrors in position, using mastic cement, putty, bolts, or screws.
- Measure and mark outlines or patterns on glass to indicate cutting lines.
- Grind or polish glass, smoothing edges when necessary.
- Fasten glass panes into wood sashes or frames with clips, points, or moldings, adding weather seals or putty around pane edges to seal joints.
- Score glass with cutters' wheels, breaking off excess glass by hand or with notched tools.
- Cut, assemble, fit, or attach metal-framed glass enclosures for showers, bathtubs, display cases, skylights, solariums, or other structures.
- Prepare glass for cutting by resting it on rack edges or against cutting tables and brushing thin layer of oil along cutting lines or dipping cutting tools in oil.
- Move furniture to clear work sites and cover floors or furnishings with drop cloths.
- Confer with customers to determine project requirements or to provide cost estimates.
- Select the type or color of glass or mirror according to specifications.
- Measure, cut, fit, and press anti-glare adhesive film to glass or spray glass with tinting solution to prevent light glare.
- Assemble and cement sections of stained glass together.
- Create patterns on glass by etching, sandblasting, or painting designs.
- Operate cranes or hoists with suction cups to lift large, heavy pieces of glass.
- Load and arrange glass or mirrors onto delivery trucks, using suction cups or cranes to lift glass.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Start machines to verify setups, and make any necessary adjustments.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
- Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
- Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
- Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
- Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
- Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
- Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Direct workers on cutting teams.
- Tighten pulleys or add abrasives to maintain cutting speeds.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Wash stones, using water hoses.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Start and stop operation of machines, using levers or buttons.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Buff and wax the finished paintwork.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Start and stop operation of machines, using levers or buttons.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean and maintain equipment, using water hoses and scrapers.
- Clean workpieces, using wire brushes.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Preheat workpieces in ovens.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Swage fittings onto cables, using swaging machines.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Assemble prefabricated parts to form subassemblies.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Swage fittings onto cables, using swaging machines.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Operate hoists to position dies or patterns on foundry floors.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Select coolants and lubricants, and start their flow.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Cool products after processing to prevent distortion.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Operate hoists to position dies or patterns on foundry floors.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Select coolants and lubricants, and start their flow.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
- Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between loading, processing, and storage areas.
- Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
- Weigh materials or products and record weight or other production data on tags or labels.
- Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
- Turn valves and open chutes to dump, spray, or release materials from dump cars or storage bins into hoppers.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
- Operate automated or semi-automated hoisting devices that raise refuse bins and dump contents into openings in truck bodies.
- Operate equipment that compresses collected refuse.
- Inspect trucks prior to beginning routes to ensure safe operating condition.
- Drive trucks, following established routes, through residential streets or alleys or through business or industrial areas.
- Refuel trucks or add other fluids, such as oil or brake fluid.
- Dump refuse or recyclable materials at disposal sites.
- Fill out defective equipment reports.
- Dismount garbage trucks to collect garbage and remount trucks to ride to the next collection point.
- Communicate with dispatchers concerning delays, unsafe sites, accidents, equipment breakdowns, or other maintenance problems.
- Check road or weather conditions to determine how routes will be affected.
- Clean trucks or compactor bodies after routes have been completed.
- Tag garbage or recycling containers to inform customers of problems, such as excess garbage or inclusion of items that are not permitted.
- Make special pickups of recyclable materials, such as food scraps, used oil, discarded computers, or other electronic items.
- Organize schedules for refuse collection.
- Operate automated or semi-automated hoisting devices that raise refuse bins and dump contents into openings in truck bodies.
- Operate equipment that compresses collected refuse.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Seal outlet valves on tank cars, barges, and trucks.
- Verify tank car, barge, or truck load numbers to ensure car placement accuracy based on written or verbal instructions.
- Start pumps and adjust valves or cables to regulate the flow of products to vessels, using knowledge of loading procedures.
- Check conditions and weights of vessels to ensure cleanliness and compliance with loading procedures.
- Observe positions of cars passing loading spouts, and swing spouts into the correct positions at the appropriate times.
- Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
- Record operating data such as products and quantities pumped, gauge readings, and operating times, manually or using computers.
- Operate industrial trucks, tractors, loaders, and other equipment to transport materials to and from transportation vehicles and loading docks, and to store and retrieve materials in warehouses.
- Connect ground cables to carry off static electricity when unloading tanker cars.
- Copy and attach load specifications to loaded tanks.
- Remove and replace tank car dome caps, or direct other workers in their removal and replacement.
- Test samples for specific gravity, using hydrometers, or send samples to laboratories for testing.
- Test vessels for leaks, damage, and defects, and repair or replace defective parts as necessary.
- Unload cars containing liquids by connecting hoses to outlet plugs and pumping compressed air into cars to force liquids into storage tanks.
- Clean interiors of tank cars or tank trucks, using mechanical spray nozzles.
- Lower gauge rods into tanks or read meters to verify contents, temperatures, and volumes of liquid loads.
- Perform general warehouse activities, such as opening containers and crates, filling warehouse orders, assisting in taking inventory, and weighing and checking materials.
- Operate ship loading and unloading equipment, conveyors, hoists, and other specialized material handling equipment such as railroad tank car unloading equipment.
- Operate conveyors and equipment to transfer grain or other materials from transportation vehicles.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Assemble and install equipment, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Weld, repair, and fabricate equipment or machinery.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Install robot and modify its program, using teach pendant.
- Inventory and store parts, tools, and equipment.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Operate dry-cleaning machines to clean soiled articles.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Operate extractors and driers, or direct their operation.
- Remove items from washers or dry-cleaning machines, or direct other workers to do so.
- Load articles into washers or dry-cleaning machines, or direct other workers to perform loading.
- Sort and count articles removed from dryers, and fold, wrap, or hang them.
- Start washers, dry cleaners, driers, or extractors, and turn valves or levers to regulate machine processes and the volume of soap, detergent, water, bleach, starch, and other additives.
- Examine and sort into lots articles to be cleaned, according to color, fabric, dirt content, and cleaning technique required.
- Clean machine filters, and lubricate equipment.
- Determine spotting procedures and proper solvents, based on fabric and stain types.
- Sprinkle chemical solvents over stains, and pat areas with brushes or sponges to remove stains.
- Inspect soiled articles to determine sources of stains, to locate color imperfections, and to identify items requiring special treatment.
- Apply chemicals to neutralize the effects of solvents.
- Receive and mark articles for laundry or dry cleaning with identifying code numbers or names, using hand or machine markers.
- Apply bleaching powders to spots and spray them with steam to remove stains from fabrics that do not respond to other cleaning solvents.
- Operate machines that comb, dry and polish furs, clean, sterilize and fluff feathers and blankets, or roll and package towels.
- Pre-soak, sterilize, scrub, spot-clean, and dry contaminated or stained articles, using neutralizer solutions and portable machines.
- Mix and add detergents, dyes, bleaches, starches, and other solutions and chemicals to clean, color, dry, or stiffen articles.
- Wash, dry-clean, or glaze delicate articles or fur garment linings by hand, using mild detergents or dry cleaning solutions.
- Match sample colors, applying knowledge of bleaching agent and dye properties, and types, construction, conditions, and colors of articles.
- Hang curtains, drapes, blankets, pants, and other garments on stretch frames to dry.
- Spray steam, water, or air over spots to flush out chemicals, dry material, raise naps, or brighten colors.
- Mend and sew articles, using hand stitching, adhesive patches, or sewing machines.
- Dye articles to change or restore their colors, using knowledge of textile compositions and the properties and effects of bleaches and dyes.
- Test fabrics in inconspicuous places to determine whether solvents will damage dyes or fabrics.
- Mix bleaching agents with hot water in vats, and soak material until it is bleached.
- Clean fabrics, using vacuums or air hoses.
- Start pumps to operate distilling systems that drain and reclaim dry cleaning solvents.
- Rinse articles in water and acetic acid solutions to remove excess dye and to fix colors.
- Immerse articles in bleaching baths to strip colors.
- Identify articles' fabrics and original dyes by sight and touch, or by testing samples with fire or chemical reagents.
- Spread soiled articles on work tables, and position stained portions over vacuum heads or on marble slabs.
- Deliver clean linens and clothes to clients.
- Receive supply deliveries and stock items in storage rooms.
- Operate dry-cleaning machines to clean soiled articles.
- Iron or press articles, fabrics, and furs, using hand irons or pressing machines.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Cure bonded structures, using portable or stationary curing equipment.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Inspect airframes for wear or other defects.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Measure parts for wear, using precision instruments.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Measure the tension of control cables.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Obtain fuel and oil samples and check them for contamination.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Clean, refuel, and change oil in line service aircraft.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Determine repair limits for engine hot section parts.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Prepare and paint aircraft surfaces.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Cure bonded structures, using portable or stationary curing equipment.
- Move hand and foot levers of hoisting equipment to position piling leads, hoist piling into leads, and position hammers over pilings.
- Move levers and turn valves to activate power hammers, or to raise and lower drophammers that drive piles to required depths.
- Drive pilings to provide support for buildings or other structures, using heavy equipment with a pile driver head.
- Conduct pre-operational checks on equipment to ensure proper functioning.
- Clean, lubricate, and refill equipment.
- Move hand and foot levers of hoisting equipment to position piling leads, hoist piling into leads, and position hammers over pilings.
- Start power winches that draw in or let out cables to change positions of dredges, or pull in and let out cables manually.
- Move levers to position dredges for excavation, to engage hydraulic pumps, to raise and lower suction booms, and to control rotation of cutterheads.
- Start and stop engines to operate equipment.
- Pump water to clear machinery pipelines.
- Lower anchor poles to verify depths of excavations, using winches, or scan depth gauges to determine depths of excavations.
- Direct or assist workers placing shore anchors and cables, laying additional pipes from dredges to shore, and pumping water from pontoons.
- Perform maintenance on dredge equipment, such as changing engine oil.
- Start power winches that draw in or let out cables to change positions of dredges, or pull in and let out cables manually.
- Use forklifts or cranes to move construction material, such as rebar.
- Position and secure steel bars, rods, cables, or mesh in concrete forms, using fasteners, rod-bending machines, blowtorches, or hand tools.
- Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions.
- Space and fasten together rods in forms according to blueprints, using wire and pliers.
- Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
- Unload rebar from trucks.
- Place blocks under rebar to hold the bars off the deck when reinforcing floors.
- Cut and fit wire mesh or fabric, using hooked rods, and position fabric or mesh in concrete to reinforce concrete.
- Bend steel rods with hand tools or rod-bending machines and weld them with arc-welding equipment.
- Use forklifts or cranes to move construction material, such as rebar.
- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
- Add specified amounts of chemicals to equipment at required times to maintain solution levels and concentrations.
- Observe machine operations, gauges, or thermometers, and adjust controls to maintain specified conditions.
- Set controls to regulate temperature and length of cycles, and start conveyors, pumps, agitators, and machines.
- Drain, clean, and refill machines or tanks at designated intervals, using cleaning solutions or water.
- Record gauge readings, materials used, processing times, or test results in production logs.
- Examine and inspect machines to detect malfunctions.
- Measure, weigh, or mix cleaning solutions, using measuring tanks, calibrated rods or suction tubes.
- Draw samples for laboratory analysis, or test solutions for conformance to specifications, such as acidity or specific gravity.
- Adjust, clean, and lubricate mechanical parts of machines, using hand tools and grease guns.
- Load machines with objects to be processed and unload them after cleaning, placing them on conveyors or racks.
- Operate or tend machines to wash and remove impurities from items such as barrels or kegs, glass products, tin plate surfaces, dried fruit, pulp, animal stock, coal, manufactured articles, plastic, or rubber.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Inspect crane site conditions to determine ground stability.
- Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage.
- Direct helpers engaged in placing blocking or outrigging under cranes.
- Determine load weights and check them against lifting capacities to prevent overload.
- Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs, as necessary.
- Inspect cables or grappling devices for wear and install or replace cables, as needed.
- Load or unload bundles from trucks, or move containers to storage bins, using moving equipment.
- Direct truck drivers backing vehicles into loading bays and cover, uncover, or secure loads for delivery.
- Review daily work or delivery schedules to determine orders, sequences of deliveries, or special loading instructions.
- Inspect bundle packaging for conformance to regulations or customer requirements, and remove and batch packaging tickets.
- Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads.
- Guide cranes to move loads about decks.
- Unscrew or tighten pipes, casing, tubing, and pump rods, using hand and power wrenches and tongs.
- Dismantle and repair oil field machinery, boilers, and steam engine parts, using hand tools and power tools.
- Walk flow lines to locate leaks, using electronic detectors and by making visual inspections, and repair the leaks.
- Lay gas and oil pipelines.
- Bolt together pump and engine parts.
- Move pipes to and from trucks, using truck winches and motorized lifts, or by hand.
- Clean trucks used in the fields.
- Dig holes, set forms, and mix and pour concrete into forms to make foundations for wood or steel derricks.
- Supply equipment to rig floors as requested and provide assistance to roughnecks.
- Clean up spilled oil by bailing it into barrels.
- Dig drainage ditches around wells and storage tanks.
- Cut down and remove trees and brush to clear drill sites, to reduce fire hazards, and to make way for roads to sites.
- Guide cranes to move loads about decks.
- Move levers to raise and lower hydraulic safety bars supporting roofs above machines until other workers complete framing.
- Hang ventilation tubing and ventilation curtains to ensure that the mining face area is kept properly ventilated.
- Conduct methane gas checks to ensure breathing quality of air.
- Check the stability of roof and rib support systems before mining face areas.
- Operate mining machines to gather coal and convey it to floors or shuttle cars.
- Drive machines into position at working faces.
- Move controls to start and regulate movement of conveyors and to start and position drill cutters or torches.
- Reposition machines to make additional holes or cuts.
- Determine locations, boundaries, and depths of holes or channels to be cut.
- Observe and listen to equipment operation to detect binding or stoppage of tools or other equipment malfunctions.
- Repair, oil, and adjust machines, and change cutting teeth, using wrenches.
- Install casings to prevent cave-ins.
- Scrape or wash conveyors, using belt scrapers or belt washers, to minimize dust production.
- Apply new technologies developed to minimize the environmental impact of coal mining.
- Guide and assist crews laying track and resetting supports and blocking.
- Move levers to raise and lower hydraulic safety bars supporting roofs above machines until other workers complete framing.
- Move or position materials such as marble slabs, using cranes, hoists, or dollies.
- Mix mortar, plaster, and grout, manually or using machines, according to standard formulas.
- Cut materials to specified sizes for installation, using power saws or tile cutters.
- Erect scaffolding or other installation structures.
- Locate and supply materials to masons for installation, following drawings or numbered sequences.
- Clean installation surfaces, equipment, tools, work sites, or storage areas, using water, chemical solutions, oxygen lances, or polishing machines.
- Apply grout between joints of bricks or tiles, using grouting trowels.
- Modify material moving, mixing, grouting, grinding, polishing, or cleaning procedures, according to installation or material requirements.
- Remove damaged tile, brick, or mortar, and clean or prepare surfaces, using pliers, hammers, chisels, drills, wire brushes, or metal wire anchors.
- Remove excess grout or residue from tile or brick joints, using sponges or trowels.
- Arrange or store materials, machines, tools, or equipment.
- Transport materials, tools, or machines to installation sites, manually or using conveyance equipment.
- Provide assistance in the preparation, installation, repair, or rebuilding of tile, brick, or stone surfaces.
- Apply caulk, sealants, or other agents to installed surfaces.
- Correct surface imperfections or fill chipped, cracked, or broken bricks or tiles, using fillers, adhesives, or grouting materials.
- Move or position materials such as marble slabs, using cranes, hoists, or dollies.
- Operate controls to move or discharge metal workpieces from furnaces.
- Regulate supplies of fuel and air, or control flow of electric current and water coolant to heat furnaces and adjust temperatures.
- Draw smelted metal samples from furnaces or kettles for analysis, and calculate types and amounts of materials needed to ensure that materials meet specifications.
- Weigh materials to be charged into furnaces, using scales.
- Record production data, and maintain production logs.
- Observe air and temperature gauges or metal color and fluidity, and turn fuel valves or adjust controls to maintain required temperatures.
- Inspect furnaces and equipment to locate defects and wear.
- Drain, transfer, or remove molten metal from furnaces, and place it into molds, using hoists, pumps, or ladles.
- Kindle fires, and shovel fuel and other materials into furnaces or onto conveyors by hand, with hoists, or by directing crane operators.
- Prepare material to load into furnaces, including cleaning, crushing, or applying chemicals, by using crushing machines, shovels, rakes, or sprayers.
- Remove impurities from the surface of molten metal, using strainers.
- Observe operations inside furnaces, using television screens, to ensure that problems do not occur.
- Sprinkle chemicals over molten metal to bring impurities to the surface.
- Direct work crews in the cleaning and repair of furnace walls and flooring.
- Scrape accumulations of metal oxides from floors, molds, and crucibles, and sift and store them for reclamation.
- Operate controls to move or discharge metal workpieces from furnaces.
- Remove sections of monument from truck bed, and guide stone onto foundation, using skids, hoist, or truck crane.
- Set vertical and horizontal alignment of structures, using plumb bob, gauge line, and level.
- Lay out wall patterns or foundations, using straight edge, rule, or staked lines.
- Set stone or marble in place, according to layout or pattern.
- Remove wedges, fill joints between stones, finish joints between stones, using a trowel, and smooth the mortar to an attractive finish, using a tuck pointer.
- Clean excess mortar or grout from surface of marble, stone, or monument, using sponge, brush, water, or acid.
- Shape, trim, face and cut marble or stone preparatory to setting, using power saws, cutting equipment, and hand tools.
- Mix mortar or grout and pour or spread mortar or grout on marble slabs, stone, or foundation.
- Construct and install prefabricated masonry units.
- Smooth, polish, and bevel surfaces, using hand tools and power tools.
- Lay brick to build shells of chimneys and smokestacks or to line or reline industrial furnaces, kilns, boilers and similar installations.
- Replace broken or missing masonry units in walls or floors.
- Drill holes in marble or ornamental stone and anchor brackets in holes.
- Dig trench for foundation of monument, using pick and shovel.
- Repair cracked or chipped areas of stone or marble, using blowtorch and mastic, and remove rough or defective spots from concrete, using power grinder or chisel and hammer.
- Position mold along guidelines of wall, press mold in place, and remove mold and paper from wall.
- Remove sections of monument from truck bed, and guide stone onto foundation, using skids, hoist, or truck crane.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Interpret the results of all methods of non-destructive testing (NDT), such as acoustic emission, electromagnetic, leak, liquid penetrant, magnetic particle, neutron radiographic, radiographic, thermal or infrared, ultrasonic, vibration analysis, and visual testing.
- Interpret or evaluate test results in accordance with applicable codes, standards, specifications, or procedures.
- Identify defects in solid materials, using ultrasonic testing techniques.
- Make radiographic images to detect flaws in objects while leaving objects intact.
- Prepare reports on non-destructive testing results.
- Visually examine materials, structures, or components for signs of corrosion, metal fatigue, cracks, or other flaws, using tools and equipment such as endoscopes, closed-circuit television systems, and fiber optics.
- Examine structures or vehicles such as aircraft, trains, nuclear reactors, bridges, dams, and pipelines, using non-destructive testing techniques.
- Document non-destructive testing methods, processes, or results.
- Produce images of objects on film, using radiographic techniques.
- Supervise or direct the work of non-destructive testing trainees or staff.
- Conduct liquid penetrant tests to locate surface cracks by coating objects with fluorescent dyes, cleaning excess penetrant, and applying developer.
- Map the presence of imperfections within objects, using sonic measurements.
- Develop or use new non-destructive testing methods, such as acoustic emission testing, leak testing, and thermal or infrared testing.
- Identify defects in concrete or other building materials, using thermal or infrared testing.
- Evaluate material properties, using radio astronomy, voltage and amperage measurement, or rheometric flow measurement.
- Operate drones for remote inspection of large or hard-to-reach structures, such as wind turbines, bridges, or tall buildings.
- Select, calibrate, or operate equipment used in the non-destructive testing of products or materials.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Document test results, using cameras, spreadsheets, documents, or other tools.
- Read and interpret blueprints, schematics, work specifications, drawings, or charts.
- Inspect or test parts to determine nature or cause of defects or malfunctions.
- Monitor computer-controlled test equipment, according to written or verbal instructions.
- Analyze test data for automotive systems, subsystems, or component parts.
- Install equipment, such as instrumentation, test equipment, engines, or aftermarket products, to ensure proper interfaces.
- Perform or execute manual or automated tests of automotive system or component performance, efficiency, or durability.
- Maintain test equipment in operational condition by performing routine maintenance or making minor repairs or adjustments as needed.
- Analyze performance of vehicles or components that have been redesigned to increase fuel efficiency, such as camless or dual-clutch engines or alternative types of air-conditioning systems.
- Improve fuel efficiency by testing vehicles or components that use lighter materials, such as aluminum, magnesium alloy, or plastic.
- Fabricate new or modify existing prototype components or fixtures.
- Order new test equipment, supplies, or replacement parts.
- Recommend product or component design improvements, based on test data or observations.
- Recommend tests or testing conditions in accordance with designs, customer requirements, or industry standards to ensure test validity.
- Test performance of vehicles that use alternative fuels, such as alcohol blends, natural gas, liquefied petroleum gas, biodiesel, nano diesel, or alternative power methods, such as solar energy or hydrogen fuel cells.
- Participate in research or testing of computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control.
- Build instrumentation or laboratory test equipment for special purposes.
- Set up mechanical, hydraulic, or electric test equipment in accordance with engineering specifications, standards, or test procedures.
- Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place.
- Conduct pressure tests on vessels, such as boilers.
- Study blueprints to determine locations, relationships, or dimensions of parts.
- Examine boilers, pressure vessels, tanks, or vats to locate defects, such as leaks, weak spots, or defective sections, so that they can be repaired.
- Inspect assembled vessels or individual components, such as tubes, fittings, valves, controls, or auxiliary mechanisms, to locate any defects.
- Lay out plate, sheet steel, or other heavy metal and locate and mark bending and cutting lines, using protractors, compasses, and drawing instruments or templates.
- Bell, bead with power hammers, or weld pressure vessel tube ends to ensure leakproof joints.
- Locate and mark reference points for columns or plates on boiler foundations, following blueprints and using straightedges, squares, transits, or measuring instruments.
- Shape or fabricate parts, such as stacks, uptakes, or chutes, to adapt pressure vessels, heat exchangers, or piping to premises, using heavy-metalworking machines such as brakes, rolls, or drill presses.
- Position, align, and secure structural parts or related assemblies to boiler frames, tanks, or vats of pressure vessels, following blueprints.
- Clean pressure vessel equipment, using scrapers, wire brushes, and cleaning solvents.
- Repair or replace defective pressure vessel parts, such as safety valves or regulators, using torches, jacks, caulking hammers, power saws, threading dies, welding equipment, or metalworking machinery.
- Straighten or reshape bent pressure vessel plates or structure parts, using hammers, jacks, or torches.
- Shape seams, joints, or irregular edges of pressure vessel sections or structural parts to attain specified fit of parts, using cutting torches, hammers, files, or metalworking machines.
- Bolt or arc weld pressure vessel structures and parts together, using wrenches or welding equipment.
- Install manholes, handholes, taps, tubes, valves, gauges, or feedwater connections in drums of water tube boilers, using hand tools.
- Assemble large vessels in an on-site fabrication shop prior to installation to ensure proper fit.
- Install refractory bricks or other heat-resistant materials in fireboxes of pressure vessels.
- Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place.
- Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
- Reassemble machines after the completion of repair or maintenance work.
- Record production, repair, and machine maintenance information.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
- Install, replace, or change machine parts and attachments, according to production specifications.
- Set up and operate machines, and adjust controls to regulate operations.
- Collaborate with other workers to repair or move machines, machine parts, or equipment.
- Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
- Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
- Start machines and observe mechanical operation to determine efficiency and to detect problems.
- Collect and discard worn machine parts and other refuse to maintain machinery and work areas.
- Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.
- Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.
- Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.
- Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
- Replace or repair metal, wood, leather, glass, or other lining in machines, or in equipment compartments or containers.
- Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and equipment.
- Troubleshoot electrical, hydraulic, or mechanical equipment and machines.
- Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
- Press buttons to activate cleaning equipment or machines.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Clean and polish vehicle windows.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Connect hoses or lines to pumps or other equipment.
- Clean the plastic work inside cars, using paintbrushes.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Press buttons to activate cleaning equipment or machines.
- Dig holes for power poles, using power augers or shovels, set poles in place with cranes, and hoist poles upright, using winches.
- Splice cables, using hand tools, epoxy, or mechanical equipment.
- Inspect or test lines or cables, recording and analyzing test results, to assess transmission characteristics and locate faults or malfunctions.
- Clean or maintain tools or test equipment.
- Set up service for customers, installing, connecting, testing, or adjusting equipment, such as digital subscriber line modems.
- Access specific areas to string lines, or install terminal boxes, auxiliary equipment, or appliances, using bucket trucks, climbing poles or ladders, or entering tunnels, trenches, or crawl spaces.
- Lay underground cable directly in trenches, or string it through conduits running through trenches.
- Pull cable through ducts by hand or with winches.
- Pull up cable by hand from large reels mounted on trucks.
- Travel to customers' premises to install, maintain, or repair audio and visual electronic reception equipment or accessories.
- Measure signal strength at utility poles, using electronic test equipment.
- Place insulation over conductors, or seal splices with moisture-proof covering.
- Compute impedance of wires from poles to houses to determine additional resistance needed for reducing signals to desired levels.
- Explain cable service to subscribers after installation, and collect any installation fees due.
- String cables between structures and lines from poles, towers, or trenches, and pull lines to proper tension.
- Fill and tamp holes, using cement, earth, and tamping devices.
- Dig trenches for underground wires or cables.
- Install equipment such as amplifiers or repeaters to maintain the strength of communications transmissions.
- Use a variety of construction equipment to complete installations, such as digger derricks, trenchers, or cable plows.
- Participate in the construction or removal of telecommunication towers or associated support structures.
- Locate and mark cables that are buried underground.
- Dig holes for power poles, using power augers or shovels, set poles in place with cranes, and hoist poles upright, using winches.
- Dig holes, using augers, and set poles, using cranes and power equipment.
- Adhere to safety practices and procedures, such as checking equipment regularly and erecting barriers around work areas.
- Drive vehicles equipped with tools and materials to job sites.
- Open switches or attach grounding devices to remove electrical hazards from disturbed or fallen lines or to facilitate repairs.
- Climb poles or use truck-mounted buckets to access equipment.
- Install, maintain, and repair electrical distribution and transmission systems, including conduits, cables, wires, and related equipment, such as transformers, circuit breakers, and switches.
- Inspect and test power lines and auxiliary equipment to locate and identify problems, using reading and testing instruments.
- Coordinate work assignment preparation and completion with other workers.
- Replace or straighten damaged poles.
- String wire conductors and cables between poles, towers, trenches, pylons, and buildings, setting lines in place and using winches to adjust tension.
- Attach cross-arms, insulators, and auxiliary equipment to poles prior to installing them.
- Travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation.
- Identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.
- Install watt-hour meters and connect service drops between power lines and consumers' facilities.
- Test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.
- Place insulating or fireproofing materials over conductors and joints.
- Splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.
- Trim trees that could be hazardous to the functioning of cables or wires.
- Pull up cable by hand from large reels mounted on trucks.
- Lay underground cable directly in trenches, or string it through conduit running through the trenches.
- Cut trenches for laying underground cables, using trenchers and cable plows.
- Cut and peel lead sheathing and insulation from defective or newly installed cables and conduits prior to splicing.
- Clean, tin, and splice corresponding conductors by twisting ends together or by joining ends with metal clamps and soldering connections.
- Dig holes, using augers, and set poles, using cranes and power equipment.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights, when necessary.
- Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
- Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
- Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
- Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
- Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
- Cut metal or wood framing and trim to size, using cutting tools.
- Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
- Coordinate work with drywall finishers who cover the seams between drywall panels.
- Trim rough edges from wallboard to maintain even joints, using knives.
- Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
- Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
- Install blanket insulation between studs and tack plastic moisture barriers over insulation.
- Assemble or install metal framing or decorative trim for windows, doorways, or vents.
- Scribe and cut edges of tile to fit walls where wall molding is not specified.
- Hang dry lines to wall moldings to guide positioning of main runners.
- Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
- Remove existing plaster, drywall, or paneling, using crowbars and hammers.
- Suspend angle iron grids or channel irons from ceilings, using wire.
- Seal joints between ceiling tiles and walls.
- Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
- Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.
- Nail channels or wood furring strips to surfaces to provide mounting for tile.
- Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights, when necessary.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Compute or record photonic test data.
- Maintain clean working environments, according to clean room standards.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Assist scientists or engineers in the conduct of photonic experiments.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Monitor inventory levels and order supplies as necessary.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Optimize photonic process parameters by making prototype or production devices.
- Splice fibers, using fusion splicing or other techniques.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Repair or calibrate products, such as surgical lasers.
- Design, build, or modify fixtures used to assemble parts.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Lay out cutting lines for machining, using drafting tools.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Install, calibrate, operate, or maintain robots.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Make system device lists or event timing charts.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Install, calibrate, operate, or maintain robots.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Maintain government-issued certifications, as required.
- Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines.
- Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate navigational aids, such as buoys or lighthouses.
- Splice and repair ropes, wire cables, or cordage, using marlinespikes, wire cutters, twine, and hand tools.
- Sweep, mop, and wash down decks to remove oil, dirt, and debris, using brooms, mops, brushes, and hoses.
- Lubricate machinery, equipment, or engine parts, such as gears, shafts, or bearings.
- Chip and clean rust spots on decks, superstructures, or sides of ships, using wire brushes and hand or air chipping machines.
- Paint or varnish decks, superstructures, lifeboats, or sides of ships.
- Provide engineers with assistance in repairing or adjusting machinery.
- Lower and man lifeboats when emergencies occur.
- Steer ships under the direction of commanders or navigating officers or direct helmsmen to steer, following designated courses.
- Tie barges together into tow units for tugboats to handle, inspecting barges periodically during voyages and disconnecting them when destinations are reached.
- Overhaul lifeboats or lifeboat gear and lower or raise lifeboats with winches or falls.
- Examine machinery to verify specified pressures or lubricant flows.
- Attach hoses and operate pumps to transfer substances to and from liquid cargo tanks.
- Read pressure and temperature gauges or displays and record data in engineering logs.
- Record data in ships' logs, such as weather conditions or distances traveled.
- Break out, rig, and stow cargo-handling gear, stationary rigging, or running gear.
- Load or unload materials, vehicles, or passengers from vessels.
- Maintain a ship's engines under the direction of the ship's engineering officers.
- Measure depth of water in shallow or unfamiliar waters, using leadlines, and telephone or shout depth information to vessel bridges.
- Give directions to crew members engaged in cleaning wheelhouses or quarterdecks.
- Clean and polish wood trim, brass, or other metal parts.
- Coordinate and direct the arrival and departure of shipping traffic.
- Operate, maintain, or repair ship equipment, such as winches, cranes, derricks, or weapons system.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
- Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
- Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
- Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to ensure that equipment is operating efficiently and safely.
- Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
- Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
- Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
- Develop operation, safety, and maintenance procedures or assist in their development.
- Test electrical systems to determine voltages, using voltage meters.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Weigh, measure, and record fuel used.
- Receive instructions from steam engineers regarding steam plant and air compressor operations.
- Install burners and auxiliary equipment, using hand tools.
- Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
- Provide assistance to plumbers in repairing or replacing water, sewer, or waste lines, and in daily maintenance activities.
- Fire coal furnaces by hand or with stokers and gas- or oil-fed boilers, using automatic gas feeds or oil pumps.
- Supervise the work of assistant stationary engineers, turbine operators, boiler tenders, or air conditioning and refrigeration operators and mechanics.
- Investigate and report on accidents.
- Ignite fuel in burners, using torches or flames.
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Raise vehicles, using hydraulic jacks.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Identify tire size and ply and inflate tires accordingly.
- Reassemble tires onto wheels.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Remount wheels onto vehicles.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Replace valve stems and remove puncturing objects.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Hammer required counterweights onto rims of wheels.
- Buff defective areas of inner tubes, using scrapers.
- Rotate tires to different positions on vehicles, using hand tools.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Inspect tire casings for defects, such as holes or tears.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Inflate inner tubes and immerse them in water to locate leaks.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Clean and tidy up the shop.
- Clean sides of whitewall tires.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Order replacements for tires or tubes.
- Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.
- Raise vehicles, using hydraulic jacks.
- Control hoists to remove parts or products from work stations.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
- Clean or maintain products, machines, or work areas.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
- Grease or oil woodworking machines.
- Unclamp workpieces and remove them from machines.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
- Control hoists to remove parts or products from work stations.
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
- Use handtools, such as screwdrivers, pliers, wrenches, pressure gauges, or precision instruments, as well as power tools, such as pneumatic wrenches, lathes, welding equipment, or jacks and hoists.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
- Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment.
- Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions.
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
- Examine and adjust protective guards, loose bolts, and specified safety devices.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
- Rewire ignition systems, lights, and instrument panels.
- Test drive trucks and buses to diagnose malfunctions or to ensure that they are working properly.
- Diagnose and repair vehicle heating and cooling systems.
- Inspect, repair, and maintain automotive and mechanical equipment and machinery, such as pumps and compressors.
- Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
- Disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.
- Adjust or repair computer controlled exhaust emissions devices.
- Rebuild gas or diesel engines.
- Specialize in repairing and maintaining parts of the engine, such as fuel injection systems.
- Recondition and replace parts, pistons, bearings, gears, and valves.
- Install or repair accessories.
- Repair or adjust seats, doors, or windows.
- Dismount, mount, and repair or replace tires.
- Align front ends and suspension systems.
- Maintain or repair vehicles with alternative fuel systems, including biodiesel, hybrid, or compressed natural gas vehicles.
- Measure vehicle emissions to determine whether they are within acceptable limits.
- Follow green operational practices involving conservation of water or energy or reduction of solid waste.
- Operate valve-grinding machines to grind and reset valves.
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance.
- Provide technical consultation or direction related to the development or production of fuel cell systems.
- Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments.
- Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers.
- Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy.
- Analyze fuel cell or related test data, using statistical software.
- Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures.
- Define specifications for fuel cell materials.
- Recommend or implement changes to fuel cell system designs.
- Validate design of fuel cells, fuel cell components, or fuel cell systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products.
- Develop fuel cell materials or fuel cell test equipment.
- Fabricate prototypes of fuel cell components, assemblies, stacks, or systems.
- Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives.
- Design or implement fuel cell testing or development programs.
- Write technical reports or proposals related to engineering projects.
- Simulate or model fuel cell, motor, or other system information, using simulation software programs.
- Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics.
- Identify or define vehicle and system integration challenges for fuel cell vehicles.
- Calculate the efficiency or power output of a fuel cell system or process.
- Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing.
- Authorize release of fuel cell parts, components, or subsystems for production.
- Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs.
- Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults.
- Develop or evaluate systems or methods of hydrogen storage for fuel cell applications.
- Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Analyze system performance or operational requirements.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Develop or test photonic prototypes or models.
- Design, integrate, or test photonics systems or components.
- Assist in the transition of photonic prototypes to production.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Design electro-optical sensing or imaging systems.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Create or maintain photonic design histories.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Design or redesign optical fibers to minimize energy loss.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Repair or adjust track switches, using wrenches and replacement parts.
- Patrol assigned track sections so that damaged or broken track can be located and reported.
- Engage mechanisms that lay tracks or rails to specified gauges.
- Cut rails to specified lengths, using rail saws.
- Operate single- or multiple-head spike driving machines to drive spikes into ties and secure rails.
- Operate track wrenches to tighten or loosen bolts at joints that hold ends of rails together.
- Lubricate machines, change oil, or fill hydraulic reservoirs to specified levels.
- Drill holes through rails, tie plates, or fishplates for insertion of bolts or spikes, using power drills.
- Drive vehicles that automatically move and lay tracks or rails over sections of track to be constructed, repaired, or maintained.
- Clean tracks or clear ice or snow from tracks or switch boxes.
- Dress and reshape worn or damaged railroad switch points or frogs, using portable power grinders.
- Clean or make minor repairs to machines or equipment.
- Observe leveling indicator arms to verify levelness and alignment of tracks.
- Operate single- or multiple-head spike pullers to pull old spikes from ties.
- Grind ends of new or worn rails to attain smooth joints, using portable grinders.
- Clean, grade, or level ballast on railroad tracks.
- Weld sections of track together, such as switch points and frogs.
- Spray ties, fishplates, or joints with oil to protect them from weathering.
- String and attach wire-guidelines machine to rails so that tracks or rails can be aligned or leveled.
- Push controls to close grasping devices on track or rail sections so that they can be raised or moved.
- Adjust controls of machines that spread, shape, raise, level, or align track, according to specifications.
- Paint railroad signs, such as speed limits or gate-crossing warnings.
- Drive graders, tamping machines, brooms, or ballast spreading machines to redistribute gravel or ballast between rails.
- Turn wheels of machines, using lever controls, to adjust guidelines for track alignments or grades, following specifications.
- Operate tie-adzing machines to cut ties and permit insertion of fishplates that hold rails.
- Raise rails, using hydraulic jacks, to allow for tie removal and replacement.
- Lower perforating guns into wells, using hoists; then use measuring devices and instrument panels to position guns in correct positions for taking samples.
- Examine blast areas to determine amounts and kinds of explosive charges needed and to ensure that safety laws are observed.
- Tie specified lengths of delaying fuses into patterns in order to time sequences of explosions.
- Place safety cones around blast areas to alert other workers of danger zones, and signal workers as necessary to ensure that they clear blast sites prior to explosions.
- Place explosive charges in holes or other spots; then detonate explosives to demolish structures or to loosen, remove, or displace earth, rock, or other materials.
- Insert, pack, and pour explosives, such as dynamite, ammonium nitrate, black powder, or slurries into blast holes; then shovel drill cuttings, admit water into boreholes, and tamp material to compact charges.
- Mark patterns, locations, and depths of charge holes for drilling, and issue drilling instructions.
- Compile and keep gun and explosives records in compliance with local and federal laws.
- Measure depths of drilled blast holes, using weighted tape measures.
- Connect electrical wire to primers, and cover charges or fill blast holes with clay, drill chips, sand, or other material.
- Lay primacord between rows of charged blast holes, and tie cord into main lines to form blast patterns.
- Assemble and position equipment, explosives, and blasting caps in holes at specified depths, or load perforating guns or torpedoes with explosives.
- Verify detonation of charges by observing control panels, or by listening for the sounds of blasts.
- Move and store inventories of explosives, loaded perforating guns, and other materials, according to established safety procedures.
- Light fuses, drop detonating devices into wells or boreholes, or activate firing devices with plungers, dials, or buttons, in order to set off single or multiple blasts.
- Drive trucks to transport explosives and blasting equipment to blasting sites.
- Cut specified lengths of primacord and attach primers to cord ends.
- Maintain inventory levels, ordering new supplies as necessary.
- Repair and service blasting, shooting, and automotive equipment, and electrical wiring and instruments, using hand tools.
- Set up and operate short-wave radio or field telephone equipment to transmit and receive blast information.
- Insert waterproof sealers, bullets, and/or powder charges into guns, and screw gun ports back into place.
- Clean, gauge, and lubricate gun ports.
- Create and lay out designs for drill and blast patterns.
- Document geological formations encountered during work.
- Operate machines to flush earth cuttings or to blow dust from holes.
- Set up and operate equipment such as hoists, jackhammers, and drills, in order to bore charge holes.
- Signal crane operators to move equipment.
- Operate drones for aerial survey of blast sites and for post-blast damage assessment.
- Lower perforating guns into wells, using hoists; then use measuring devices and instrument panels to position guns in correct positions for taking samples.
- Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools.
- Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
- Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices.
- Order parts, supplies, or equipment from catalogs or suppliers.
- Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
- Design new equipment to aid in the repair or maintenance of machines, mechanical equipment, or building structures.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
- Estimate costs to repair machinery, equipment, or building structures.
- Align and balance new equipment after installation.
- Record type and cost of maintenance or repair work.
- Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories.
- Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
- Install equipment to improve the energy or operational efficiency of residential or commercial buildings.
- Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures, or tools.
- Perform general cleaning of buildings or properties.
- Train or manage maintenance personnel or subcontractors.
- Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
- Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Provide groundskeeping services, such as landscaping or snow removal.
- Operate cutting torches or welding equipment to cut or join metal parts.
- Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, or other measuring instruments.
- Assemble boilers at installation sites, using tools such as levels, plumb bobs, hammers, torches, or other hand tools.
- Position, attach, or blow insulating materials to prevent energy losses from buildings, pipes, or other structures or objects.
- Use drones for inspecting roofs, gutters, and other hard-to-reach areas of buildings.
- Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools.
- Retrieve lost equipment from bore holes, using retrieval tools and equipment.
- Operate controls to stabilize machines and to position and align drills.
- Start, stop, and control drilling speed of machines and insertion of casings into holes.
- Regulate air pressure, rotary speed, and downward pressure, according to the type of rock or concrete being drilled.
- Select and attach drill bits and drill rods, adding more rods as hole depths increase, and changing drill bits as needed.
- Drive or guide truck-mounted equipment into position, level and stabilize rigs, and extend telescoping derricks.
- Operate machines to flush earth cuttings or to blow dust from holes.
- Verify depths and alignments of boring positions.
- Perform routine maintenance and upgrade work on machines and equipment, such as replacing parts, building up drill bits, and lubricating machinery.
- Select the appropriate drill for the job, using knowledge of rock or soil conditions.
- Document geological formations encountered during work.
- Drive trucks, tractors, or truck-mounted drills to and from work sites.
- Assemble and position machines, augers, casing pipes, and other equipment, using hand and power tools.
- Record drilling progress and geological data.
- Fabricate well casings.
- Pour water into wells, or pump water or slush into wells to cool drill bits and to remove drillings.
- Create and lay out designs for drill and blast patterns.
- Place and install screens, casings, pumps, and other well fixtures to develop wells.
- Operate water-well drilling rigs and other equipment to drill, bore, and dig for water wells or for environmental assessment purposes.
- Review client requirements and proposed locations for drilling operations to determine feasibility, and to determine cost estimates.
- Drill or bore holes in rock for blasting, grouting, anchoring, or building foundations.
- Perform pumping tests to assess well performance.
- Disinfect, reconstruct, and redevelop contaminated wells and water pumping systems, and clean and disinfect new wells in preparation for use.
- Design well pumping systems.
- Signal crane operators to move equipment.
- Withdraw drill rods from holes, and extract core samples.
- Inspect core samples to determine nature of strata, or take samples to laboratories for analysis.
- Retract augers to force discharge dirt from holes.
- Monitor drilling operations, by checking gauges and listening to equipment to assess drilling conditions and to determine the need to adjust drilling or alter equipment.
- Retrieve lost equipment from bore holes, using retrieval tools and equipment.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.
- Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to ensure proper functioning.
- Inspect parts for surface defects.
- Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.
- Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
- Fabricate or assemble mechanical, electrical, or electronic components or assemblies.
- Align, fit, or assemble component parts, using hand or power tools, fixtures, templates, or microscopes.
- Produce electrical, electronic, or mechanical drawings or other related documents or graphics necessary for electromechanical design, using computer-aided design (CAD) software.
- Select electromechanical equipment, materials, components, or systems to meet functional specifications.
- Establish and maintain inventory, records, or documentation systems.
- Develop, test, or program new robots.
- Prepare written documentation of electromechanical test results.
- Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
- Select and use laboratory, operational, or diagnostic techniques or test equipment to assess electromechanical circuits, equipment, processes, systems, or subsystems.
- Determine whether selected electromechanical components comply with environmental standards and regulations.
- Develop or implement programs related to the environmental impact of engineering activities.
- Train others to install, use, or maintain robots.
- Analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servomechanical, or other electromechanical systems.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
- Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
- Translate electromechanical drawings into design specifications, applying principles of engineering, thermal or fluid sciences, mathematics, or statistics.
- Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
- Assist engineers to implement electromechanical designs in industrial or other settings.
- Consult with machinists to ensure that electromechanical equipment or systems meet design specifications.
- Program and calibrate drones for specific missions or tasks, ensuring proper functionality and performance.
- Operate, test, or maintain robotic equipment used for green production applications, such as waste-to-energy conversion systems, minimization of material waste, or replacement of human operators in dangerous work environments.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
- Oversee or inspect production processes.
- Identify opportunities for improvements in quality, cost, or efficiency of automation equipment.
- Develop or implement programs to address problems related to production, materials, safety, or quality.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Create or interpret engineering drawings, schematic diagrams, formulas, or blueprints for management or engineering staff.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Recommend corrective or preventive actions to assure or improve product quality or reliability.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Select material quantities or processing methods needed to achieve efficient production.
- Monitor and adjust production processes or equipment for quality and productivity.
- Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures.
- Prepare layouts, drawings, or sketches of machinery or equipment, such as shop tooling, scale layouts, or new equipment design, using drafting equipment or computer-aided design (CAD) software.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Provide advice or training to other technicians.
- Analyze, estimate, or report production costs.
- Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
- Coordinate equipment purchases, installations, or transfers.
- Select cleaning materials, tools, or equipment.
- Calibrate or adjust equipment to ensure quality production, using tools such as calipers, micrometers, height gauges, protractors, or ring gauges.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Oversee equipment start-up, characterization, qualification, or release.
- Develop manufacturing infrastructure to integrate or deploy new manufacturing processes.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Develop production, inventory, or quality assurance programs.
- Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste.
- Design plant layouts or production facilities.
- Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Lubricate moving parts.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Weld, braze, or solder electrical connections.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Set machinery for proper performance, using computers.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Rewire electrical systems, and repair or replace electrical accessories.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Repair and operate battery-charging equipment.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Test battery charges, and replace or recharge batteries as necessary.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Lift and align components into position, using hoist or block and tackle.
- Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
- Test electrical circuits or components for continuity, using electrical test equipment.
- Repair or replace defective equipment, components, or wiring.
- Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
- Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
- Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
- Install, connect, or adjust thermostats, humidistats, or timers.
- Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
- Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
- Test pipes, lines, components, and connections for leaks.
- Braze or solder parts to repair defective joints and leaks.
- Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
- Keep records of repairs and replacements made and causes of malfunctions.
- Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
- Adjust system controls to settings recommended by manufacturer to balance system.
- Perform mechanical overhauls and refrigerant reclaiming.
- Install expansion and control valves, using acetylene torches and wrenches.
- Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
- Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.
- Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
- Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
- Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.
- Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
- Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.
- Supervise and instruct assistants.
- Lay out reference points for installation of structural and functional components, using measuring instruments.
- Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
- Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.
- Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
- Contact vendors to order and arrange delivery of parts for customers.
- Lift and align components into position, using hoist or block and tackle.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
- Run appropriate power, ground, or coaxial cables.
- Test operation of tower transmission components, using sweep testing tools or software.
- Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).
- Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.
- Replace existing antennas with new antennas as directed.
- Bolt equipment into place, using hand or power tools.
- Install, connect, or test underground or aboveground grounding systems.
- Complete reports related to project status, progress, or other work details, using computer software.
- Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.
- Transport equipment to work sites, using utility trucks and equipment trailers.
- Take site survey photos or photos of work performed, using digital cameras.
- Climb towers to access components, using safety equipment, such as full-body harnesses.
- Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Locate tower sites where work is to be performed, using mapping software.
- Install or repair tower lighting components, including strobes, beacons, or lighting controllers.
- Calibrate and align components, using scales, gauges, and other measuring instruments.
- Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
- Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.
- Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
- Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.
- Mount equipment on transmission towers and in vehicles such as ships or ambulances.
- Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
- Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
- Test batteries, using hydrometers and ammeters, and charge batteries as necessary.
- Test emergency transmitters to ensure their readiness for immediate use.
- Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
- Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
- Use drone technology to inspect towers and antennas for damage or maintenance needs.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.