Job Duties Custom List 27-1023.00 — Floral Designers
- Perform general cleaning duties in the store to ensure the shop is clean and tidy.
Occupations with related tasks Save Table: XLSX CSV
| Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
| 2 | 4 | 2 | 47-2061.00 | Construction Laborers 
|
| 2 | 3 | 2 | 47-2053.00 | Terrazzo Workers and Finishers |
| 2 | 2 | 2 | 47-3011.00 | Helpers--Brickmasons, Blockmasons, Stonemasons, and Tile and Marble Setters |
| 2 | 2 | 2 | 47-2141.00 | Painters, Construction and Maintenance |
| 2 | 2 | 1 | 47-2051.00 | Cement Masons and Concrete Finishers |
| 1 | 6 | 2 | 53-7061.00 | Cleaners of Vehicles and Equipment |
| 1 | 3 | 2 | 47-3016.00 | Helpers--Roofers
|
| 1 | 3 | 1 | 35-9011.00 | Dining Room and Cafeteria Attendants and Bartender Helpers
|
| 1 | 2 | 1 | 47-3014.00 | Helpers--Painters, Paperhangers, Plasterers, and Stucco Masons |
| 1 | 2 | 2 | 39-4012.00 | Crematory Operators |
| 1 | 2 | 2 | 53-7071.00 | Gas Compressor and Gas Pumping Station Operators |
| 1 | 2 | 2 | 53-6031.00 | Automotive and Watercraft Service Attendants |
| 1 | 2 | 1 | 47-2161.00 | Plasterers and Stucco Masons |
| 1 | 2 | 3 | 39-5011.00 | Barbers |
| 1 | 2 | 2 | 53-6011.00 | Bridge and Lock Tenders |
| 1 | 2 | 2 | 51-9023.00 | Mixing and Blending Machine Setters, Operators, and Tenders |
| 1 | 2 | 2 | 39-2021.00 | Animal Caretakers
|
| 1 | 2 | 2 | 39-4021.00 | Funeral Attendants |
| 1 | 2 | 2 | 39-3093.00 | Locker Room, Coatroom, and Dressing Room Attendants
|
| 1 | 1 | 2 | 53-7064.00 | Packers and Packagers, Hand |
| 1 | 1 | 2 | 53-7063.00 | Machine Feeders and Offbearers |
| 1 | 1 | 2 | 47-2042.00 | Floor Layers, Except Carpet, Wood, and Hard Tiles
|
| 1 | 1 | 2 | 47-2021.00 | Brickmasons and Blockmasons |
| 1 | 1 | 2 | 53-6021.00 | Parking Attendants |
| 1 | 1 | 2 | 47-5022.00 | Excavating and Loading Machine and Dragline Operators, Surface Mining |
| 1 | 1 | 1 | 39-3091.00 | Amusement and Recreation Attendants
|
| 1 | 1 | 2 | 39-2011.00 | Animal Trainers
|
| 1 | 1 | 2 | 39-6011.00 | Baggage Porters and Bellhops |
| 1 | 1 | 2 | 39-6012.00 | Concierges |
| 1 | 1 | 3 | 53-5031.00 | Ship Engineers |
| 1 | 1 | 3 | 39-5094.00 | Skincare Specialists
|
| 1 | 1 | 1 | 53-7011.00 | Conveyor Operators and Tenders |
| 1 | 1 | 2 | 47-2142.00 | Paperhangers
|
| 1 | 1 | 3 | 39-5012.00 | Hairdressers, Hairstylists, and Cosmetologists
|
| 1 | 1 | 3 | 39-4031.00 | Morticians, Undertakers, and Funeral Arrangers |
| 1 | 1 | 2 | 39-3031.00 | Ushers, Lobby Attendants, and Ticket Takers |
| 1 | 1 | 2 | 47-2044.00 | Tile and Stone Setters
|
| 1 | 1 | 2 | 47-2081.00 | Drywall and Ceiling Tile Installers |
| 1 | 1 | 5 | 25-1052.00 | Chemistry Teachers, Postsecondary |
| 1 | 1 | 3 | 27-1013.00 | Fine Artists, Including Painters, Sculptors, and Illustrators |
| 1 | 1 | 3 | 25-9042.00 | Teaching Assistants, Preschool, Elementary, Middle, and Secondary School, Except Special Education |
| 1 | 1 | 3 | 25-9043.00 | Teaching Assistants, Special Education |
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Clean or prepare construction sites to eliminate possible hazards.
- Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
- Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
- Read plans, instructions, or specifications to determine work activities.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
- Position, join, align, or seal structural components, such as concrete wall sections or pipes.
- Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
- Control traffic passing near, in, or around work zones.
- Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
- Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
- Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Provide assistance to craft workers, such as carpenters, plasterers, or masons.
- Raze buildings or salvage useful materials.
- Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
- Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
- Place, consolidate, or protect case-in-place concrete or masonry structures.
- Mix ingredients to create compounds for covering or cleaning surfaces.
- Mix, pour, or spread concrete, using portable cement mixers.
- Operate jackhammers or drills to break up concrete or pavement.
- Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
- Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Clean or prepare construction sites to eliminate possible hazards.
- Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.
- Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.
- Grind surfaces with a power grinder, or polish surfaces with polishing or surfacing machines.
- Cut metal division strips and press them into the terrazzo base for joints or changes of color to form designs or patterns or to help prevent cracks.
- Blend marble chip mixtures, place into panels, and push a roller over the surface to embed the chips.
- Modify mixing, grouting, grinding, or cleaning procedures, according to type of installation or material used.
- Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.
- Grind curved surfaces or areas inaccessible to surfacing machine, such as stairways or cabinet tops, with portable hand grinder.
- Position and secure moisture membrane and wire mesh in preparation for pouring base materials for terrazzo installation.
- Fill slight grinding depressions with matching grout material and hand-trowel for a smooth, uniform surface.
- Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Chip, scrape, or grind high spots, ridges, or rough projections to finish concrete, using pneumatic chisel, hand chisel, or other hand tools.
- Mold expansion joints and edges, using edging tools, jointers, or straightedges.
- Move terrazzo installation materials, tools, machines, or work devices to work areas, manually or using wheelbarrow.
- Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.
- Precast terrazzo blocks in wooden forms.
- Wet concrete surface and rub with stone to smooth surface and obtain specified finish.
- Build wooden molds, clamping molds around areas to be repaired, or setting up frames to the proper depth and alignment.
- Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.
- Produce rough concrete surface, using broom.
- Remove frames when the foundation is dry.
- Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.
- Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.
- Clean installation surfaces, equipment, tools, work sites, or storage areas, using water, chemical solutions, oxygen lances, or polishing machines.
- Remove damaged tile, brick, or mortar, and clean or prepare surfaces, using pliers, hammers, chisels, drills, wire brushes, or metal wire anchors.
- Mix mortar, plaster, and grout, manually or using machines, according to standard formulas.
- Erect scaffolding or other installation structures.
- Cut materials to specified sizes for installation, using power saws or tile cutters.
- Modify material moving, mixing, grouting, grinding, polishing, or cleaning procedures, according to installation or material requirements.
- Transport materials, tools, or machines to installation sites, manually or using conveyance equipment.
- Provide assistance in the preparation, installation, repair, or rebuilding of tile, brick, or stone surfaces.
- Locate and supply materials to masons for installation, following drawings or numbered sequences.
- Arrange or store materials, machines, tools, or equipment.
- Move or position materials such as marble slabs, using cranes, hoists, or dollies.
- Remove excess grout or residue from tile or brick joints, using sponges or trowels.
- Apply grout between joints of bricks or tiles, using grouting trowels.
- Apply caulk, sealants, or other agents to installed surfaces.
- Correct surface imperfections or fill chipped, cracked, or broken bricks or tiles, using fillers, adhesives, or grouting materials.
- Clean installation surfaces, equipment, tools, work sites, or storage areas, using water, chemical solutions, oxygen lances, or polishing machines.
- Remove damaged tile, brick, or mortar, and clean or prepare surfaces, using pliers, hammers, chisels, drills, wire brushes, or metal wire anchors.
- Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
- Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.
- Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting.
- Read work orders or receive instructions from supervisors or homeowners to determine work requirements.
- Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers.
- Fill cracks, holes, or joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.
- Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines.
- Erect scaffolding or swing gates, or set up ladders, to work above ground level.
- Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
- Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.
- Remove fixtures such as pictures, door knobs, lamps, or electric switch covers prior to painting.
- Use special finishing techniques such as sponging, ragging, layering, or faux finishing.
- Waterproof buildings, using waterproofers or caulking.
- Select and purchase tools or finishes for surfaces to be covered, considering durability, ease of handling, methods of application, and customers' wishes.
- Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
- Polish final coats to specified finishes.
- Cut stencils and brush or spray lettering or decorations on surfaces.
- Clean tools and equipment, such as brushes and rollers.
- Hang wallpaper.
- Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
- Remove old finishes by stripping, sanding, wire brushing, burning, or using water or abrasive blasting.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Apply muriatic acid to clean surface, and rinse with water.
- Check the forms that hold the concrete to see that they are properly constructed.
- Set the forms that hold concrete to the desired pitch and depth, and align them.
- Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
- Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
- Mold expansion joints and edges, using edging tools, jointers, and straightedge.
- Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
- Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
- Produce rough concrete surface, using broom.
- Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
- Operate power vibrator to compact concrete.
- Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
- Waterproof or restore concrete surfaces, using appropriate compounds.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
- Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
- Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
- Build wooden molds, and clamp molds around area to be repaired, using hand tools.
- Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
- Fabricate concrete beams, columns, and panels.
- Polish surface, using polishing or surfacing machine.
- Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
- Push roller over surface to embed chips in surface.
- Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Apply muriatic acid to clean surface, and rinse with water.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Clean and polish vehicle windows.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Clean the plastic work inside cars, using paintbrushes.
- Apply paints, dyes, polishes, reconditioners, waxes, or masking materials to vehicles to preserve, protect, or restore color or condition.
- Drive vehicles to or from workshops or customers' workplaces or homes.
- Inspect parts, equipment, or vehicles for cleanliness, damage, and compliance with standards or regulations.
- Mix cleaning solutions, abrasive compositions, or other compounds, according to formulas.
- Maintain inventories of supplies.
- Turn valves or disconnect hoses to eliminate water, cleaning solutions, or vapors from machinery or tanks.
- Turn valves or handles on equipment to regulate pressure or flow of water, air, steam, or abrasives from sprayer nozzles.
- Monitor operation of cleaning machines and stop machines or notify supervisors when malfunctions occur.
- Press buttons to activate cleaning equipment or machines.
- Connect hoses or lines to pumps or other equipment.
- Disassemble and reassemble machines or equipment or remove and reattach vehicle parts or trim, using hand tools.
- Lubricate machinery, vehicles, or equipment or perform minor repairs or adjustments, using hand tools.
- Transport materials, equipment, or supplies to or from work areas, using carts or hoists.
- Fit boot spoilers, side skirts, or mud flaps to cars.
- Sweep, shovel, or vacuum loose debris or salvageable scrap into containers and remove containers from work areas.
- Rinse objects and place them on drying racks or use cloth, squeegees, or air compressors to dry surfaces.
- Clean and polish vehicle windows.
- Scrub, scrape, or spray machine parts, equipment, or vehicles, using scrapers, brushes, clothes, cleaners, disinfectants, insecticides, acid, abrasives, vacuums, or hoses.
- Pre-soak or rinse machine parts, equipment, or vehicles by immersing objects in cleaning solutions or water, manually or using hoists.
- Clean the plastic work inside cars, using paintbrushes.
- Sweep and clean roofs to prepare them for the application of new roofing materials.
- Clean work areas and equipment.
- Clear drains and downspouts and clean gutters.
- Check to ensure that completed roofs are watertight.
- Locate worn or torn areas in roofs.
- Maintain tools and equipment.
- Cover roofs with layers of roofing felt or asphalt strips before installing tile, slate, or composition materials.
- Remove old roofing materials.
- Unload materials and tools from work trucks, and unroll roofing as directed.
- Set ladders, scaffolds, and hoists in place for taking supplies to roofs.
- Place tiles, nail them to roof boards, and cover nailheads with roofing cement.
- Provide assistance to skilled roofers installing and repairing roofs, flashings, and surfaces.
- Attach roofing paper and composition shingles, using nails.
- Perform emergency leak repairs and general maintenance for a variety of roof types.
- Attach sheets of metal to roof boards or building frameworks when installing metal roofs.
- Hoist tar and roofing materials to roofs, using ropes and pulleys, or carry materials up ladders.
- Apply shingles, gravel, or asphalt over the top layer of tar to protect the roofing material.
- Chop tar into small pieces, and heat chopped tar in kettles.
- Sweep and clean roofs to prepare them for the application of new roofing materials.
- Clean work areas and equipment.
- Clear drains and downspouts and clean gutters.
- Perform serving, cleaning, or stocking duties in establishments, such as cafeterias or dining rooms, to facilitate customer service.
- Wipe tables or seats with dampened cloths or replace dirty tablecloths.
- Clean and polish counters, shelves, walls, furniture, or equipment in food service areas or other areas of restaurants and mop or vacuum floors.
- Run cash registers.
- Serve ice water, coffee, rolls, or butter to patrons.
- Scrape and stack dirty dishes and carry dishes and other tableware to kitchens for cleaning.
- Set tables with clean linens, condiments, or other supplies.
- Greet and seat customers.
- Clean up spilled food or drink or broken dishes and remove empty bottles and trash.
- Maintain adequate supplies of items, such as clean linens, silverware, glassware, dishes, or trays.
- Locate items requested by customers.
- Fill beverage or ice dispensers.
- Carry food, dishes, trays, or silverware from kitchens or supply departments to serving counters.
- Carry trays from food counters to tables for cafeteria patrons.
- Stock cabinets or serving areas with condiments and refill condiment containers.
- Serve food to customers when waiters or waitresses need assistance.
- Replenish supplies of food or equipment at steam tables or service bars.
- Wash glasses or other serving equipment at bars.
- Carry linens to or from laundry areas.
- Garnish foods and position them on tables to make them visible and accessible.
- Mix and prepare flavors for mixed drinks.
- Slice and pit fruit used to garnish drinks.
- Stock refrigerating units with wines or bottled beer or replace empty beer kegs.
- Prepare food, such as sandwiches, for customers.
- Perform serving, cleaning, or stocking duties in establishments, such as cafeterias or dining rooms, to facilitate customer service.
- Wipe tables or seats with dampened cloths or replace dirty tablecloths.
- Clean and polish counters, shelves, walls, furniture, or equipment in food service areas or other areas of restaurants and mop or vacuum floors.
- Place articles to be stripped into stripping tanks.
- Clean work areas and equipment.
- Perform support duties to assist painters, paperhangers, plasterers, or masons.
- Apply protective coverings, such as masking tape, to articles or areas that could be damaged or stained by work processes.
- Erect scaffolding.
- Fill cracks or breaks in surfaces of plaster articles or areas with putty or epoxy compounds.
- Supply or hold tools and materials.
- Smooth surfaces of articles to be painted, using sanding and buffing tools and equipment.
- Mix plaster, and carry plaster to plasterers.
- Remove articles such as cabinets, metal furniture, and paint containers from stripping tanks after prescribed periods of time.
- Pour specified amounts of chemical solutions into stripping tanks.
- Place articles to be stripped into stripping tanks.
- Clean work areas and equipment.
- Clean the crematorium, including tables, floors, and equipment.
- Sweep or vacuum the cremation chamber to retrieve remains for storage in an urn or other container.
- Document divided remains to ensure parts are not misplaced.
- Embalm, dress, or otherwise prepare the deceased for viewing.
- Explain the cremation process to family or friends of the deceased.
- Offer counsel and comfort to bereaved families or friends.
- Pick up and handle human or pet remains in a respectful manner.
- Place corpses into crematory machines to reduce remains to bone fragments using flame, heat, or alkaline hydrolysis.
- Pulverize remaining bone fragments into smaller pieces, using specialized equipment, such as a cremulator or grinder.
- Read documentation to confirm the identity of the deceased.
- Remove jewelry, watches, or other personal items from the deceased prior to cremation.
- Transport the deceased to a funeral home or crematory using a van, hearse, or other vehicle.
- Clean the crematorium, including tables, floors, and equipment.
- Sweep or vacuum the cremation chamber to retrieve remains for storage in an urn or other container.
- Maintain each station by performing general housekeeping duties such as painting, washing, and cleaning.
- Clean, lubricate, and adjust equipment, and replace filters and gaskets, using hand tools.
- Monitor meters and pressure gauges to determine consumption rate variations, temperatures, and pressures.
- Respond to problems by adjusting control room equipment or instructing other personnel to adjust equipment at problem locations or in other control areas.
- Record instrument readings and operational changes in operating logs.
- Adjust valves and equipment to obtain specified performance.
- Move controls and turn valves to start compressor engines, pumps, and auxiliary equipment.
- Operate power-driven pumps that transfer liquids, semi-liquids, gases, or powdered materials.
- Submit daily reports on facility operations.
- Take samples of gases and conduct chemical tests to determine gas quality and sulfur or moisture content, or send samples to laboratories for analysis.
- Read gas meters, and maintain records of the amounts of gas received and dispensed from holders.
- Turn knobs or switches to regulate pressures.
- Connect pipelines between pumps and containers that are being filled or emptied.
- Maintain each station by performing general housekeeping duties such as painting, washing, and cleaning.
- Clean, lubricate, and adjust equipment, and replace filters and gaskets, using hand tools.
- Clean parking areas, offices, restrooms, or equipment, and remove trash.
- Collect cash payments from customers, and make change or charge purchases to customers' credit cards, providing customers with receipts.
- Check tire pressure and levels of fuel, motor oil, transmission, radiator, battery, or other fluids, adding air or fluids as required.
- Perform minor repairs, such as adjusting brakes, replacing spark plugs, or changing engine oil or filters.
- Order stock, and price and shelve incoming goods.
- Sell and install accessories, such as batteries, windshield wiper blades, fan belts, bulbs, or headlamps.
- Grease and lubricate vehicles or specified units, such as springs, universal joints, or steering knuckles, using grease guns or spray lubricants.
- Rotate, test, and repair or replace tires.
- Prepare daily reports of fuel, oil, and accessory sales.
- Activate fuel pumps and fill fuel tanks of vehicles with gasoline or diesel fuel to specified levels.
- Test and charge batteries.
- Maintain customer records and follow up periodically with telephone, mail, or personal reminders of services due.
- Provide customers with information about local roads or highways.
- Clean parking areas, offices, restrooms, or equipment, and remove trash.
- Clean windshields.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
- Set up scaffolds.
- Determine materials needed to complete the job and place orders accordingly.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Cure freshly plastered surfaces.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Spray acoustic materials or texture finish over walls or ceilings.
- Mold or install ornamental plaster pieces, panels, or trim.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Clean job sites.
- Clean work stations and sweep floors.
- Clean and sterilize scissors, combs, clippers, and other instruments.
- Drape and pin protective cloths around customers' shoulders.
- Cut and trim hair according to clients' instructions or current hairstyles, using clippers, combs, hand-held blow driers, and scissors.
- Question patrons regarding desired services and haircut styles.
- Apply lather and shave beards or neck and temple hair contours, using razors.
- Record services provided on cashiers' tickets or receive payment from customers.
- Shape and trim beards and moustaches, using scissors.
- Perform clerical and administrative duties such as keeping records, paying bills, and hiring and supervising personnel.
- Stay informed of the latest styles and hair care techniques.
- Suggest treatments to alleviate hair problems.
- Order supplies.
- Shampoo hair.
- Recommend and sell lotions, tonics, or other cosmetic supplies.
- Provide skin care and nail treatments.
- Keep card files on clientele, recording notes of work done, products used and fees charged after each visit.
- Curl, color, or straighten hair, using special chemical solutions and equipment.
- Provide face, neck, and scalp massages.
- Clean work stations and sweep floors.
- Clean and sterilize scissors, combs, clippers, and other instruments.
- Perform maintenance duties, such as sweeping, painting, and yard work to keep facilities clean and in order.
- Clean and lubricate equipment, and make minor repairs and adjustments.
- Control machinery to open and close canal locks and dams, railroad or highway drawbridges, or horizontally or vertically adjustable bridges.
- Direct movements of vessels in locks or bridge areas, using signals, telecommunication equipment, or loudspeakers.
- Observe position and progress of vessels to ensure best use of lock spaces or bridge opening spaces.
- Record names, types, and destinations of vessels passing through bridge openings or locks, and numbers of trains or vehicles crossing bridges.
- Observe approaching vessels to determine size and speed, and listen for whistle signals indicating desire to pass.
- Move levers to activate traffic signals, navigation lights, and alarms.
- Write and submit maintenance work requisitions.
- Log data, such as water levels and weather conditions.
- Prepare accident reports.
- Turn valves to increase or decrease water levels in locks.
- Check that bridges are clear of vehicles and pedestrians prior to opening.
- Stop automobile and pedestrian traffic on bridges, and lower automobile gates prior to moving bridges.
- Raise drawbridges and observe passage of water traffic or lower drawbridges and raise automobile gates.
- Maintain and guard stations in bridges to check waterways for boat traffic.
- Inspect canal and bridge equipment, and areas, such as roadbeds, for damage or defects, reporting problems to supervisors as necessary.
- Attach ropes or cable lines to bitts on lock decks or wharfs to secure vessels.
- Perform maintenance duties, such as sweeping, painting, and yard work to keep facilities clean and in order.
- Clean and lubricate equipment, and make minor repairs and adjustments.
- Clean and maintain equipment, using hand tools.
- Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
- Read work orders to determine production specifications or information.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Mix or blend ingredients by starting machines and mixing for specified times.
- Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
- Compound or process ingredients or dyes, according to formulas.
- Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
- Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.
- Dump or pour specified amounts of materials into machinery or equipment.
- Record operational or production data on specified forms.
- Collect samples of materials or products for laboratory testing.
- Unload mixtures into containers or onto conveyors for further processing.
- Add or mix chemicals or ingredients for processing, using hand tools or other devices.
- Tend accessory equipment, such as pumps or conveyors, to move materials or ingredients through production processes.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Open valves to drain slurry from mixers into storage tanks.
- Clean work areas.
- Clean and maintain equipment, using hand tools.
- Do facility laundry and clean, organize, maintain, and disinfect animal quarters, such as pens and stables, and equipment, such as saddles and bridles.
- Clean and disinfect surgical equipment.
- Feed and water animals according to schedules and feeding instructions.
- Provide treatment to sick or injured animals, or contact veterinarians to secure treatment.
- Examine and observe animals to detect signs of illness, disease, or injury.
- Mix food, liquid formulas, medications, or food supplements according to instructions, prescriptions, and knowledge of animal species.
- Exercise animals to maintain their physical and mental health.
- Collect and record animal information, such as weight, size, physical condition, treatments received, medications given, and food intake.
- Respond to questions from patrons, and provide information about animals, such as behavior, habitat, breeding habits, or facility activities.
- Answer telephones and schedule appointments.
- Advise pet owners on how to care for their pets' health.
- Perform animal grooming duties, such as washing, brushing, clipping, and trimming coats, cutting nails, and cleaning ears.
- Observe and caution children petting and feeding animals in designated areas to ensure the safety of humans and animals.
- Find homes for stray or unwanted animals.
- Discuss with clients their pets' grooming needs.
- Transfer animals between enclosures to facilitate breeding, birthing, shipping, or rearrangement of exhibits.
- Adjust controls to regulate specified temperature and humidity of animal quarters, nurseries, or exhibit areas.
- Anesthetize and inoculate animals, according to instructions.
- Install, maintain, and repair animal care facility equipment, such as infrared lights, feeding devices, and cages.
- Train animals to perform certain tasks.
- Order, unload, and store feed and supplies.
- Sell pet food and supplies.
- Scuba dive in aquariums to perform exhibit maintenance.
- Train volunteers and facility staff.
- Do facility laundry and clean, organize, maintain, and disinfect animal quarters, such as pens and stables, and equipment, such as saddles and bridles.
- Clean and disinfect surgical equipment.
- Clean funeral parlors or chapels.
- Clean and drive funeral vehicles, such as cars or hearses, in funeral processions.
- Greet people at the funeral home.
- Perform a variety of tasks during funerals to assist funeral directors and to ensure that services run smoothly and as planned.
- Close caskets at appropriate point in services.
- Direct or escort mourners to parlors or chapels in which wakes or funerals are being held.
- Place caskets in parlors or chapels prior to wakes or funerals.
- Offer assistance to mourners as they enter or exit limousines.
- Arrange floral offerings or lights around caskets.
- Act as pallbearers.
- Supervise funeral processions and assist with cemetery parking.
- Deliver floral arrangements or other items to family members of the deceased.
- Carry flowers to hearses or limousines for transportation to places of interment.
- Perform general maintenance tasks for funeral homes, such as maintaining equipment or caring for funeral grounds.
- Issue and store funeral equipment.
- Provide advice to mourners on how to make charitable donations in honor of the deceased.
- Embalm, dress, cosmeticize, and casket the deceased.
- Prepare obituaries for newspapers.
- Obtain burial permits and register deaths.
- Transport the deceased to the funeral home.
- Obtain doctors' signatures on death certificate and complete other paperwork, such as insurance claims forms.
- Assist with cremations and the processing and packaging of cremated remains.
- Attend to the needs of the bereaved, such as by offering comfort, counseling, or after-care programs.
- Perform various administrative tasks, such as typing documents or answering telephone calls.
- Clean funeral parlors or chapels.
- Clean and drive funeral vehicles, such as cars or hearses, in funeral processions.
- Clean facilities such as floors or locker rooms.
- Collect soiled linen or clothing for laundering.
- Provide towels and sheets to clients in public baths, steam rooms, and restrooms.
- Assign dressing room facilities, locker space, or clothing containers to patrons of athletic or bathing establishments.
- Check supplies to ensure adequate availability, and order new supplies when necessary.
- Monitor patrons' facility use to ensure that rules and regulations are followed, and safety and order are maintained.
- Answer customer inquiries or explain cost, availability, policies, and procedures of facilities.
- Refer guest problems or complaints to supervisors.
- Maintain a lost-and-found collection.
- Clean and polish footwear, using brushes, sponges, cleaning fluid, polishes, waxes, liquid or sole dressing, and daubers.
- Activate emergency action plans and administer first aid, as necessary.
- Procure beverages, food, and other items as requested.
- Store personal possessions for patrons, issue claim checks for articles stored, and return articles on receipt of checks.
- Operate washing machines and dryers to clean soiled apparel and towels.
- Maintain inventories of clothing or uniforms, accessories, equipment, or linens.
- Attend to needs of athletic teams in clubhouses.
- Provide assistance to patrons by performing duties such as opening doors or carrying bags.
- Operate controls that regulate temperatures or room environments.
- Issue gym clothes, uniforms, towels, athletic equipment, and special athletic apparel.
- Provide or arrange for services such as clothes pressing, cleaning, or repair.
- Report and document safety hazards, potentially hazardous conditions, and unsafe practices and procedures.
- Stencil identifying information on equipment.
- Set up various apparatus or athletic equipment.
- Maintain or repair athletic equipment.
- Clean facilities such as floors or locker rooms.
- Collect soiled linen or clothing for laundering.
- Clean containers, materials, supplies, or work areas, using cleaning solutions and hand tools.
- Examine and inspect containers, materials, or products to ensure that product quality and packing specifications are met.
- Measure, weigh, and count products and materials.
- Record product, packaging, and order information on specified forms and records.
- Seal containers or materials, using glues, fasteners, nails, and hand tools.
- Assemble, line, and pad cartons, crates, and containers, using hand tools.
- Obtain, move, and sort products, materials, containers, and orders, using hand tools.
- Mark and label containers, container tags, or products, using marking tools.
- Remove completed or defective products or materials, placing them on moving equipment, such as conveyors, or in specified areas, such as loading docks.
- Place or pour products or materials into containers, using hand tools and equipment, or fill containers from spouts or chutes.
- Load materials and products into package processing equipment.
- Transport packages to customers' vehicles.
- Clean containers, materials, supplies, or work areas, using cleaning solutions and hand tools.
- Clean and maintain machinery, equipment, and work areas to ensure proper functioning and safe working conditions.
- Inspect materials and products for defects, and to ensure conformance to specifications.
- Record production and operational data, such as amount of materials processed.
- Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.
- Weigh or measure materials or products to ensure conformance to specifications.
- Identify and mark materials, products, and samples, following instructions.
- Load materials and products into machines and equipment, or onto conveyors, using hand tools and moving devices.
- Transfer materials and products to and from machinery and equipment, using industrial trucks or hand trucks.
- Fasten, package, or stack materials and products, using hand tools and fastening equipment.
- Remove materials and products from machines and equipment, and place them in boxes, trucks or conveyors, using hand tools and moving devices.
- Shovel or scoop materials into containers, machines, or equipment for processing, storage, or transport.
- Open and close gates of belt and pneumatic conveyors on machines that are fed directly from preceding machines.
- Add chemicals, solutions, or ingredients to machines or equipment as required by the manufacturing process.
- Clean and maintain machinery, equipment, and work areas to ensure proper functioning and safe working conditions.
- Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
- Cut flooring material to fit around obstructions.
- Inspect surface to be covered to ensure that it is firm and dry.
- Trim excess covering materials, tack edges, and join sections of covering material to form tight joint.
- Form a smooth foundation by stapling plywood or Masonite over the floor or by brushing waterproof compound onto surface and filling cracks with plaster, putty, or grout to seal pores.
- Measure and mark guidelines on surfaces or foundations, using chalk lines and dividers.
- Cut covering and foundation materials, according to blueprints and sketches.
- Roll and press sheet wall and floor covering into cement base to smooth and finish surface, using hand roller.
- Apply adhesive cement to floor or wall material to join and adhere foundation material.
- Determine traffic areas and decide location of seams.
- Lay out, position, and apply shock-absorbing, sound-deadening, or decorative coverings to floors, walls, and cabinets, following guidelines to keep courses straight and create designs.
- Remove excess cement to clean finished surface.
- Disconnect and remove appliances, light fixtures, and worn floor and wall covering from floors, walls, and cabinets.
- Heat and soften floor covering materials to patch cracks or fit floor coverings around irregular surfaces, using blowtorch.
- Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
- Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using broom, wire brush, or scraper.
- Measure distance from reference points and mark guidelines to lay out work, using plumb bobs and levels.
- Construct corners by fastening in plumb position a corner pole or building a corner pyramid of bricks, and filling in between the corners using a line from corner to corner to guide each course, or layer, of brick.
- Apply and smooth mortar or other mixture over work surface.
- Calculate angles and courses and determine vertical and horizontal alignment of courses.
- Break or cut bricks, tiles, or blocks to size, using trowel edge, hammer, or power saw.
- Interpret blueprints and drawings to determine specifications and to calculate the materials required.
- Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.
- Fasten or fuse brick or other building material to structure with wire clamps, anchor holes, torch, or cement.
- Examine brickwork or structure to determine need for repair.
- Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.
- Remove burned or damaged brick or mortar, using sledgehammer, crowbar, chipping gun, or chisel.
- Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.
- Spray or spread refractory material over brickwork to protect against deterioration.
- Use drone technology to inspect and assess the condition of tall structures.
- Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using broom, wire brush, or scraper.
- Keep parking areas clean and orderly to ensure that space usage is maximized.
- Take numbered tags from customers, locate vehicles, and deliver vehicles, or provide customers with instructions for locating vehicles.
- Inspect vehicles to detect any damage.
- Greet customers and open their car doors.
- Issue ticket stubs or place numbered tags on windshields, log tags or attach tag to customers' keys, and give customers matching tags for locating parked vehicles.
- Perform cash handling tasks, such as making change, balancing and recording cash drawer, or distributing tips.
- Explain and calculate parking charges, collect fees from customers, and respond to customer complaints.
- Park and retrieve automobiles for customers in parking lots, storage garages, or new car lots.
- Provide customer assistance and information, such as giving directions or handling wheelchairs.
- Call emergency responders or the proper authorities and provide motorist assistance, such as giving directions or helping jump start a stalled vehicle.
- Patrol parking areas to prevent vehicle damage and vehicle or property thefts.
- Direct motorists to parking areas or parking spaces, using hand signals or flashlights as necessary.
- Escort customers to their vehicles to ensure their safety.
- Perform maintenance on cars in storage to protect tires, batteries, or exteriors from deterioration.
- Lift, position, and remove barricades to open or close parking areas.
- Keep parking areas clean and orderly to ensure that space usage is maximized.
- Handle slides, mud, or pit cleanings or maintenance.
- Move levers, depress foot pedals, and turn dials to operate power machinery, such as power shovels, stripping shovels, scraper loaders, or backhoes.
- Set up or inspect equipment prior to operation.
- Become familiar with digging plans, machine capabilities and limitations, and efficient and safe digging procedures in a given application.
- Observe hand signals, grade stakes, or other markings when operating machines so that work can be performed to specifications.
- Operate machinery to perform activities such as backfilling excavations, vibrating or breaking rock or concrete, or making winter roads.
- Receive written or oral instructions regarding material movement or excavation.
- Move materials over short distances, such as around a construction site, factory, or warehouse.
- Create or maintain inclines or ramps.
- Lubricate, adjust, or repair machinery and replace parts, such as gears, bearings, or bucket teeth.
- Direct workers engaged in placing blocks or outriggers to prevent capsizing of machines when lifting heavy loads.
- Measure and verify levels of rock or gravel, bases, or other excavated material.
- Direct ground workers engaged in activities such as moving stakes or markers, or changing positions of towers.
- Adjust dig face angles for varying overburden depths and set lengths.
- Drive machines to work sites.
- Perform manual labor to prepare or finish sites, such as shoveling materials by hand.
- Handle slides, mud, or pit cleanings or maintenance.
- Clean sporting equipment, vehicles, rides, booths, facilities, or grounds.
- Sell tickets and collect fees from customers.
- Provide information about facilities, entertainment options, and rules and regulations.
- Keep informed of shut-down and emergency evacuation procedures.
- Direct patrons to rides, seats, or attractions.
- Monitor activities to ensure adherence to rules and safety procedures, or arrange for the removal of unruly patrons.
- Record details of attendance, sales, receipts, reservations, or repair activities.
- Maintain inventories of equipment, storing and retrieving items and assembling and disassembling equipment as necessary.
- Provide assistance to patrons entering or exiting amusement rides, boats, or ski lifts, or mounting or dismounting animals.
- Inspect equipment to detect wear and damage and perform minor repairs, adjustments, or maintenance tasks, such as oiling parts.
- Verify, collect, or punch tickets before admitting patrons to venues, such as amusement parks and rides.
- Fasten safety devices for patrons, or provide them with directions for fastening devices.
- Announce or describe amusement park attractions to patrons to entice customers to games and other entertainment.
- Schedule the use of recreation facilities, such as golf courses, tennis courts, bowling alleys, or softball diamonds.
- Sell and serve refreshments to customers.
- Rent, sell, or issue sporting equipment and supplies, such as bowling shoes, golf balls, swimming suits, or beach chairs.
- Operate, drive, or explain the use of mechanical riding devices or other automatic equipment in amusement parks, carnivals, or recreation areas.
- Clean sporting equipment, vehicles, rides, booths, facilities, or grounds.
- Feed or exercise animals or provide other general care, such as cleaning or maintaining holding or performance areas.
- Cue or signal animals during performances.
- Talk to or interact with animals to familiarize them to human voices or contact.
- Conduct training programs to develop or maintain desired animal behaviors for competition, entertainment, obedience, security, riding, or related purposes.
- Observe animals' physical conditions to detect illness or unhealthy conditions requiring medical care.
- Evaluate animals to determine their temperaments, abilities, or aptitude for training.
- Administer prescribed medications to animals.
- Keep records documenting animal health, diet, or behavior.
- Evaluate animals for trainability and ability to perform.
- Advise animal owners regarding the purchase of specific animals.
- Train horses or other equines for riding, harness, show, racing, or other work, using knowledge of breed characteristics, training methods, performance standards, and the peculiarities of each animal.
- Use oral, spur, rein, or hand commands to condition horses to carry riders or to pull horse-drawn equipment.
- Retrain horses to break bad habits, such as kicking, bolting, or resisting bridling or grooming.
- Train dogs in human assistance or property protection duties.
- Organize or conduct animal shows.
- Teach owners how to train their dogs.
- Teach people with visual impairments to use guide dogs.
- Feed or exercise animals or provide other general care, such as cleaning or maintaining holding or performance areas.
- Maintain clean lobbies or entrance areas for travelers or guests.
- Receive and mark baggage by completing and attaching claim checks.
- Greet incoming guests and escort them to their rooms.
- Transport guests about premises and local areas, or arrange for transportation.
- Transfer luggage, trunks, and packages to and from rooms, loading areas, vehicles, or transportation terminals, by hand or using baggage carts.
- Supply guests or travelers with directions, travel information, and other information, such as available services and points of interest.
- Explain the operation of room features, such as locks, ventilation systems, and televisions.
- Assist travelers and guests with disabilities.
- Deliver messages and room service orders, and run errands for guests.
- Pick up and return items for laundry and valet service.
- Act as part of the security team at transportation terminals, hotels, or similar establishments.
- Compute and complete charge slips for services rendered and maintain records.
- Page guests in hotel lobbies, dining rooms, or other areas.
- Set up conference rooms, display tables, racks, or shelves, and arrange merchandise displays for sales personnel.
- Inspect guests' rooms to ensure that they are adequately stocked, orderly, and comfortable.
- Complete baggage insurance forms.
- Arrange for shipments of baggage, express mail, and parcels by providing weighing and billing services.
- Maintain clean lobbies or entrance areas for travelers or guests.
- Clean and tidy hotel lounge.
- Provide information about local features, such as shopping, dining, nightlife, or recreational destinations.
- Make reservations for patrons, such as for dinner, spa treatments, or golf tee times, and obtain tickets to special events.
- Provide directions to guests.
- Order flowers for guests.
- Make travel arrangements for sightseeing or other tours.
- Pick up and deliver items or run errands for guests.
- Plan special events, parties, or meetings, which may include booking musicians or celebrities.
- Book airline or train tickets, reserve rental cars, or arrange shuttle service for guests.
- Arrange childcare services for guests.
- Carry out unusual requests, such as searching for hard-to-find items or arranging for exotic services, such as hot-air balloon rides.
- Assist guests with special needs by providing equipment such as wheelchairs.
- Receive, store, or deliver luggage or mail.
- Perform office duties on a temporary basis when needed.
- Arrange for the replacement of items lost by travelers.
- Provide business services for guests, such as sending or receiving faxes or shipping packages.
- Arrange for interpreters or translators when patrons require such services.
- Provide food and beverage services to guests.
- Clean and tidy hotel lounge.
- Clean engine parts and keep engine rooms clean.
- Monitor engine, machinery, or equipment indicators when vessels are underway, and report abnormalities to appropriate shipboard staff.
- Monitor the availability, use, or condition of lifesaving equipment or pollution preventatives to ensure that international regulations are followed.
- Monitor and test operations of engines or other equipment so that malfunctions and their causes can be identified.
- Start engines to propel ships, and regulate engines and power transmissions to control speeds of ships, according to directions from captains or bridge computers.
- Perform or participate in emergency drills, as required.
- Perform general marine vessel maintenance or repair work, such as repairing leaks, finishing interiors, refueling, or maintaining decks.
- Maintain or repair engines, electric motors, pumps, winches, or other mechanical or electrical equipment, or assist other crew members with maintenance or repair duties.
- Maintain complete records of engineering department activities, including machine operations.
- Operate or maintain off-loading liquid pumps or valves.
- Maintain electrical power, heating, ventilation, refrigeration, water, or sewerage systems.
- Install engine controls, propeller shafts, or propellers.
- Record orders for changes in ship speed or direction, and note gauge readings or test data, such as revolutions per minute or voltage output, in engineering logs or bellbooks.
- Order and receive engine room stores, such as oil or spare parts, maintain inventories, and record usage of supplies.
- Act as a liaison between a ship's captain and shore personnel to ensure that schedules and budgets are maintained and that the ship is operated safely and efficiently.
- Supervise marine engine technicians engaged in the maintenance or repair of mechanical or electrical marine vessels, and inspect their work to ensure that it is performed properly.
- Fabricate engine replacement parts, such as valves, stay rods, or bolts, using metalworking machinery.
- Use drone technology for ship inspections, maintenance, or other tasks.
- Clean engine parts and keep engine rooms clean.
- Sterilize equipment and clean work areas.
- Cleanse clients' skin with water, creams, or lotions.
- Demonstrate how to clean and care for skin properly and recommend skin-care regimens.
- Determine which products or colors will improve clients' skin quality and appearance.
- Keep records of client needs and preferences and the services provided.
- Treat the facial skin to maintain and improve its appearance, using specialized techniques and products, such as peels and masks.
- Examine clients' skin, using magnifying lamps or visors when necessary, to evaluate skin condition and appearance.
- Perform simple extractions to remove blackheads.
- Select and apply cosmetic products, such as creams, lotions, and tonics.
- Stay abreast of latest industry trends, products, research, and treatments.
- Apply chemical peels to reduce fine lines and age spots.
- Refer clients to medical personnel for treatment of serious skin problems.
- Provide facial and body massages.
- Remove body and facial hair by applying wax.
- Tint eyelashes and eyebrows.
- Collaborate with plastic surgeons and dermatologists to provide patients with preoperative and postoperative skin care.
- Advise clients about colors and types of makeup and instruct them in makeup application techniques.
- Sell makeup to clients.
- Sterilize equipment and clean work areas.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Inform supervisors of equipment malfunctions that need to be addressed.
- Observe conveyor operations and monitor lights, dials, and gauges to maintain specified operating levels and to detect equipment malfunctions.
- Record production data such as weights, types, quantities, and storage locations of materials, as well as equipment performance problems and downtime.
- Load, unload, or adjust materials or products on conveyors by hand, by using lifts, hoists, and scoops, or by opening gates, chutes, or hoppers.
- Stop equipment or machinery and clear jams, using poles, bars, and hand tools, or remove damaged materials from conveyors.
- Distribute materials, supplies, and equipment to work stations, using lifts and trucks.
- Observe packages moving along conveyors to identify packages, detect defective packaging, and perform quality control.
- Collect samples of materials or products, checking them to ensure conformance to specifications or sending them to laboratories for analysis.
- Position deflector bars, gates, chutes, or spouts to divert flow of materials from one conveyor onto another conveyor.
- Repair or replace equipment components or parts such as blades, rolls, and pumps.
- Manipulate controls, levers, and valves to start pumps, auxiliary equipment, or conveyors, and to adjust equipment positions, speeds, timing, and material flows.
- Weigh or measure materials and products, using scales or other measuring instruments, or read scales on conveyors that continually weigh products, to verify specified tonnages and prevent overloads.
- Read production and delivery schedules, and confer with supervisors, to determine sorting and transfer procedures, arrangement of packages on pallets, and destinations of loaded pallets.
- Press console buttons to deflect packages to predetermined accumulators or reject lines.
- Affix identifying information to materials or products, using hand tools.
- Move, assemble, and connect hoses or nozzles to material hoppers, storage tanks, conveyor sections or chutes, and pumps.
- Thread strapping through strapping tools and secure battens with strapping to form protective pallets around extrusions.
- Contact workers in work stations or other departments to request movement of materials, products, or machinery, or to notify them of incoming shipments and their estimated delivery times.
- Join sections of conveyor frames at temporary working areas, and connect power units.
- Clean, sterilize, and maintain equipment, machinery, and work stations, using hand tools, shovels, brooms, chemicals, hoses, and lubricants.
- Remove paint, varnish, dirt, and grease from surfaces, using paint remover and water soda solutions.
- Smooth strips or sections of paper with brushes or rollers to remove wrinkles and bubbles and to smooth joints.
- Trim rough edges from strips, using straightedges and trimming knives.
- Trim excess material at ceilings or baseboards, using knives.
- Check finished wallcoverings for proper alignment, pattern matching, and neatness of seams.
- Mark vertical guidelines on walls to align strips, using plumb bobs and chalk lines.
- Cover interior walls and ceilings of rooms with decorative wallpaper or fabric, using hand tools.
- Apply adhesives to the backs of paper strips, using brushes, or dunk strips of prepasted wallcovering in water, wiping off any excess adhesive.
- Measure and cut strips from rolls of wallpaper or fabric, using shears or razors.
- Place strips or sections of paper on surfaces, aligning section edges and patterns.
- Fill holes, cracks, and other surface imperfections preparatory to covering surfaces.
- Measure surfaces or review work orders to estimate the quantities of materials needed.
- Apply sizing to seal surfaces and maximize adhesion of coverings to surfaces.
- Smooth rough spots on walls and ceilings, using sandpaper.
- Set up equipment, such as pasteboards and scaffolds.
- Remove old paper, using water, steam machines, or solvents and scrapers.
- Apply thinned glue to waterproof porous surfaces, using brushes, rollers, or pasting machines.
- Mix paste, using paste powder and water, and brush paste onto surfaces.
- Staple or tack advertising posters onto fences, walls, billboards, or poles.
- Apply acetic acid to damp plaster to prevent lime from bleeding through paper.
- Remove paint, varnish, dirt, and grease from surfaces, using paint remover and water soda solutions.
- Keep work stations clean and sanitize tools, such as scissors and combs.
- Bleach, dye, or tint hair, using applicator or brush.
- Cut, trim and shape hair or hairpieces, based on customers' instructions, hair type, and facial features, using clippers, scissors, trimmers and razors.
- Schedule client appointments.
- Update and maintain customer information records, such as beauty services provided.
- Demonstrate and sell hair care products and cosmetics.
- Analyze patrons' hair and other physical features to determine and recommend beauty treatment or suggest hair styles.
- Shampoo, rinse, condition, and dry hair and scalp or hairpieces with water, liquid soap, or other solutions.
- Operate cash registers to receive payments from patrons.
- Order, display, and maintain supplies.
- Comb, brush, and spray hair or wigs to set style.
- Develop new styles and techniques.
- Apply water or setting, straightening or waving solutions to hair, and use curlers, rollers, hot combs and curling irons to press and curl hair.
- Shape eyebrows and remove facial hair, using depilatory cream, tweezers, electrolysis or wax.
- Shave, trim, and shape beards and moustaches.
- Train or supervise other hairstylists, hairdressers, and assistants.
- Massage and treat scalp for hygienic and remedial purposes, using hands, fingers, or vibrating equipment.
- Administer therapeutic medication and advise patron to seek medical treatment for chronic or contagious scalp conditions.
- Recommend and explain the use of cosmetics, lotions, and creams to soften and lubricate skin and enhance and restore natural appearance.
- Clean, shape, and polish fingernails and toenails, using files and nail polish.
- Give facials to patrons, using special compounds, such as lotions and creams.
- Attach wigs or hairpieces to model heads and dress wigs and hairpieces according to instructions, samples, sketches or photographs.
- Keep work stations clean and sanitize tools, such as scissors and combs.
- Clean funeral home facilities and grounds.
- Oversee the preparation and care of the remains of people who have died.
- Obtain information needed to complete legal documents, such as death certificates or burial permits.
- Perform embalming duties, as necessary.
- Consult with families or friends of the deceased to arrange funeral details, such as obituary notice wording, casket selection, or plans for services.
- Remove deceased remains from place of death.
- Contact cemeteries to schedule the opening and closing of graves.
- Plan, schedule, or coordinate funerals, burials, or cremations, arranging details such as floral delivery or the time and place of services.
- Close caskets and lead funeral corteges to churches or burial sites.
- Provide information on funeral service options, products, or merchandise, and maintain a casket display area.
- Offer counsel and comfort to bereaved families or friends.
- Direct preparations and shipment of bodies for out-of-state burial.
- Discuss and negotiate prearranged funerals with clients.
- Maintain financial records, order merchandise, or prepare accounts.
- Provide or arrange transportation between sites for the remains, mourners, pallbearers, clergy, or flowers.
- Arrange for clergy members to perform needed services.
- Plan placement of caskets at funeral sites or place or adjust lights, fixtures, or floral displays.
- Manage funeral home operations, including the hiring, training, or supervision of embalmers, funeral attendants, or other staff.
- Inform survivors of benefits for which they may be eligible.
- Arrange for pallbearers or inform pallbearers or honorary groups of their duties.
- Receive or usher people to their seats for services.
- Participate in community activities for funeral home promotion or other purposes.
- Clean funeral home facilities and grounds.
- Greet patrons attending entertainment events.
- Sell or collect admission tickets, passes, or facility memberships from patrons at entertainment events.
- Settle seating disputes or help solve other customer concerns.
- Examine tickets or passes to verify authenticity, using criteria such as color or date issued.
- Provide assistance with patrons' special needs, such as helping those with wheelchairs.
- Guide patrons to exits or provide other instructions or assistance in case of emergency.
- Refuse admittance to undesirable persons or persons without tickets or passes.
- Assist patrons by giving directions to points in or outside of the facility or providing information about local attractions.
- Assist patrons in finding seats, lighting the way with flashlights, if necessary.
- Maintain order and ensure adherence to safety rules.
- Search for lost articles or for parents of lost children.
- Operate refreshment stands during intermission or obtain refreshments for press box patrons during performances.
- Count and record number of tickets collected.
- Lead tours and answer visitors' questions about the exhibits.
- Manage inventory or sale of artist merchandise.
- Verify credentials of patrons desiring entrance into press box and permit only authorized persons to enter.
- Distribute programs to patrons.
- Give door checks to patrons who are temporarily leaving establishments.
- Manage informational kiosks or displays of event signs or posters.
- Work with others to change advertising displays.
- Page individuals wanted at the box office.
- Schedule or manage staff, such as volunteer usher corps.
- Clean facilities.
- Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.
- Align and straighten tile using levels, squares, and straightedges.
- Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.
- Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.
- Determine and implement the best layout to achieve a desired pattern.
- Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.
- Study blueprints and examine surface to be covered to determine amount of material needed.
- Measure and mark surfaces to be tiled, following blueprints.
- Lay and set mosaic tiles to create decorative wall, mural, and floor designs.
- Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.
- Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.
- Apply a sealer to make grout stain- and water-resistant.
- Level concrete and allow to dry.
- Measure and cut metal lath to size for walls and ceilings, using tin snips.
- Install and anchor fixtures in designated positions, using hand tools.
- Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.
- Remove and replace cracked or damaged tile.
- Cut tile backing to required size, using shears.
- Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.
- Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.
- Assist customers in selection of tile and grout.
- Prepare cost and labor estimates, based on calculations of time and materials needed for project.
- Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper.
- Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.
- Build underbeds and install anchor bolts, wires, and brackets.
- Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.
- Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
- Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
- Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
- Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
- Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
- Assemble or install metal framing or decorative trim for windows, doorways, or vents.
- Cut metal or wood framing and trim to size, using cutting tools.
- Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
- Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
- Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights, when necessary.
- Trim rough edges from wallboard to maintain even joints, using knives.
- Suspend angle iron grids or channel irons from ceilings, using wire.
- Coordinate work with drywall finishers who cover the seams between drywall panels.
- Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
- Scribe and cut edges of tile to fit walls where wall molding is not specified.
- Hang dry lines to wall moldings to guide positioning of main runners.
- Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
- Install blanket insulation between studs and tack plastic moisture barriers over insulation.
- Seal joints between ceiling tiles and walls.
- Remove existing plaster, drywall, or paneling, using crowbars and hammers.
- Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
- Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
- Nail channels or wood furring strips to surfaces to provide mounting for tile.
- Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.
- Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
- Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
- Clean laboratory facilities.
- Prepare and deliver lectures to undergraduate or graduate students on topics such as organic chemistry, analytical chemistry, and chemical separation.
- Establish, teach, and monitor students' compliance with safety rules for handling chemicals, equipment, and other hazardous materials.
- Evaluate and grade students' class work, laboratory performance, assignments, and papers.
- Supervise students' laboratory work.
- Maintain student attendance records, grades, and other required records.
- Supervise undergraduate or graduate teaching, internship, and research work.
- Compile, administer, and grade examinations, or assign this work to others.
- Prepare course materials, such as syllabi, homework assignments, and handouts.
- Plan, evaluate, and revise curricula, course content, and course materials and methods of instruction.
- Maintain regularly scheduled office hours to advise and assist students.
- Conduct research in a particular field of knowledge and publish findings in professional journals, books, or electronic media.
- Initiate, facilitate, and moderate classroom discussions.
- Keep abreast of developments in the field by reading current literature, talking with colleagues, and participating in professional conferences.
- Advise students on academic and vocational curricula and on career issues.
- Write grant proposals to procure external research funding.
- Select, order, and maintain materials and supplies for teaching and research, such as textbooks, chemicals, and laboratory equipment.
- Collaborate with colleagues to address teaching and research issues.
- Write letters of recommendation for students.
- Prepare and submit required reports related to instruction.
- Serve on academic or administrative committees that deal with institutional policies, departmental matters, and academic issues.
- Participate in student recruitment, registration, and placement activities.
- Serve on committees or in professional societies.
- Perform administrative duties, such as serving as a department head.
- Participate in campus and community events.
- Act as advisers to student organizations.
- Compile bibliographies of specialized materials for outside reading assignments.
- Provide professional consulting services to government or industry.
- Clean laboratory facilities.
- Apply solvents and cleaning agents to clean surfaces of paintings, and to remove accretions, discolorations, and deteriorated varnish.
- Use materials such as pens and ink, watercolors, charcoal, oil, or computer software to create artwork.
- Integrate and develop visual elements, such as line, space, mass, color, and perspective, to produce desired effects, such as the illustration of ideas, emotions, or moods.
- Confer with clients, editors, writers, art directors, and other interested parties regarding the nature and content of artwork to be produced.
- Maintain portfolios of artistic work to demonstrate styles, interests, and abilities.
- Market artwork through brochures, mailings, or Web sites.
- Study different techniques to learn how to apply them to artistic endeavors.
- Monitor events, trends, and other circumstances, research specific subject areas, attend art exhibitions, and read art publications to develop ideas and keep current on art world activities.
- Photograph objects, places, or scenes for reference material.
- Model substances such as clay or wax, using fingers and small hand tools to form objects.
- Create sculptures, statues, and other three-dimensional artwork by using abrasives and tools to shape, carve, and fabricate materials such as clay, stone, wood, or metal.
- Set up exhibitions of artwork for display or sale.
- Render drawings, illustrations, and sketches of buildings, manufactured products, or models, working from sketches, blueprints, memory, models, or reference materials.
- Shade and fill in sketch outlines and backgrounds, using a variety of media such as water colors, markers, and transparent washes, labeling designated colors when necessary.
- Frame and mat artwork for display or sale.
- Submit artwork to shows or galleries.
- Submit preliminary or finished artwork or project plans to clients for approval, incorporating changes as necessary.
- Collaborate with engineers, mechanics, and other technical experts as necessary to build and install creations.
- Cut, bend, laminate, arrange, and fasten individual or mixed raw and manufactured materials and products to form works of art.
- Develop project budgets for approval, estimating time lines and material costs.
- Create and prepare sketches and model drawings of cartoon characters, providing details from memory, live models, manufactured products, or reference materials.
- Create finished art work as decoration, or to elucidate or substitute for spoken or written messages.
- Create sketches, profiles, or likenesses of posed subjects or photographs, using any combination of freehand drawing, mechanical assembly kits, and computer imaging.
- Trace drawings onto clear acetate for painting or coloring, or trace them with ink to make final copies.
- Collaborate with writers who create ideas, stories, or captions that are combined with artists' work.
- Brush or spray protective or decorative finishes on completed background panels, informational legends, exhibit accessories, or finished paintings.
- Teach artistic techniques to children or adults.
- Provide entertainment at special events by performing activities such as drawing cartoons.
- Apply solvents and cleaning agents to clean surfaces of paintings, and to remove accretions, discolorations, and deteriorated varnish.
- Supervise students in classrooms, halls, cafeterias, school yards, and gymnasiums, or on field trips.
- Tutor and assist children individually or in small groups to help them master assignments and to reinforce learning concepts presented by teachers.
- Enforce administration policies and rules governing students.
- Teach social skills to students.
- Instruct and monitor students in the use and care of equipment and materials to prevent injuries and damage.
- Discuss assigned duties with classroom teachers to coordinate instructional efforts.
- Present subject matter to students under the direction and guidance of teachers, using lectures, discussions, supervised role-playing methods, or by reading aloud.
- Observe students' performance, and record relevant data to assess progress.
- Organize and label materials and display students' work in a manner appropriate for their eye levels and perceptual skills.
- Organize and supervise games and other recreational activities to promote physical, mental, and social development.
- Attend staff meetings and serve on committees, as required.
- Use computers, audio-visual aids, and other equipment and materials to supplement presentations.
- Prepare lesson materials, bulletin board displays, exhibits, equipment, and demonstrations.
- Conduct demonstrations to teach skills, such as sports, dancing, and handicrafts.
- Distribute teaching materials, such as textbooks, workbooks, papers, and pencils, to students.
- Type, file, and duplicate materials.
- Laminate teaching materials to increase their durability under repeated use.
- Requisition and stock teaching materials and supplies.
- Take class attendance and maintain attendance records.
- Participate in teacher-parent conferences regarding students' progress or problems.
- Assist in bus loading and unloading.
- Maintain computers in classrooms and laboratories, and assist students with hardware and software use.
- Grade homework and tests, and compute and record results, using answer sheets or electronic marking devices.
- Plan, prepare, and develop various teaching aids, such as bibliographies, charts, and graphs.
- Operate and maintain audio-visual equipment.
- Distribute tests and homework assignments and collect them when they are completed.
- Collect money from students for school-related projects.
- Clean classrooms.
- Provide assistance to students with special needs.
- Teach socially acceptable behavior, employing techniques such as behavior modification or positive reinforcement.
- Supervise students in classrooms, halls, cafeterias, school yards, and gymnasiums, or on field trips.
- Provide students with disabilities with assistive devices, supportive technology, and assistance accessing facilities, such as restrooms.
- Carry out therapeutic regimens, such as behavior modification and personal development programs, under the supervision of special education instructors, psychologists, or speech-language pathologists.
- Tutor and assist children individually or in small groups to help them master assignments and to reinforce learning concepts presented by teachers.
- Employ special educational strategies or techniques during instruction to improve the development of sensory- and perceptual-motor skills, language, cognition, or memory.
- Enforce administration policies and rules governing students.
- Observe students' performance, and record relevant data to assess progress.
- Instruct and monitor students in the use and care of equipment and materials to prevent injuries and damage.
- Present subject matter to students under the direction and guidance of teachers, using lectures, discussions, supervised role-playing methods, or by reading aloud.
- Discuss assigned duties with classroom teachers to coordinate instructional efforts.
- Instruct students in daily living skills required for independent maintenance and self-sufficiency, such as hygiene, safety, or food preparation.
- Prepare classrooms with a variety of materials or resources for children to explore, manipulate, or use in learning activities or imaginative play.
- Distribute teaching materials, such as textbooks, workbooks, papers, and pencils, to students.
- Organize and supervise games and other recreational activities to promote physical, mental, and social development.
- Use computers, audio-visual aids, and other equipment and materials to supplement presentations.
- Organize and label materials and display students' work in a manner appropriate for their eye levels and perceptual skills.
- Prepare lesson materials, bulletin board displays, exhibits, equipment, and demonstrations.
- Grade homework and tests, and compute and record results, using answer sheets or electronic marking devices.
- Assist in bus loading and unloading.
- Take class attendance and maintain attendance records.
- Maintain computers in classrooms and laboratories, and assist students with hardware and software use.
- Prepare lesson outlines and plans in assigned subject areas and submit outlines to teachers for review.
- Participate in teacher-parent conferences regarding students' progress or problems.
- Assist librarians in school libraries.
- Requisition and stock teaching materials and supplies.
- Attend staff meetings and serve on committees, as required.
- Laminate teaching materials to increase their durability under repeated use.
- Clean classrooms.
